processes.texi 115 KB
Newer Older
Glenn Morris's avatar
Glenn Morris committed
1 2 3
@c -*-texinfo-*-
@c This is part of the GNU Emacs Lisp Reference Manual.
@c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2001,
Glenn Morris's avatar
Glenn Morris committed
4
@c   2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
Glenn Morris's avatar
Glenn Morris committed
5
@c See the file elisp.texi for copying conditions.
6
@setfilename ../../info/processes
Glenn Morris's avatar
Glenn Morris committed
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
@node Processes, Display, Abbrevs, Top
@chapter Processes
@cindex child process
@cindex parent process
@cindex subprocess
@cindex process

  In the terminology of operating systems, a @dfn{process} is a space in
which a program can execute.  Emacs runs in a process.  Emacs Lisp
programs can invoke other programs in processes of their own.  These are
called @dfn{subprocesses} or @dfn{child processes} of the Emacs process,
which is their @dfn{parent process}.

  A subprocess of Emacs may be @dfn{synchronous} or @dfn{asynchronous},
depending on how it is created.  When you create a synchronous
subprocess, the Lisp program waits for the subprocess to terminate
before continuing execution.  When you create an asynchronous
subprocess, it can run in parallel with the Lisp program.  This kind of
subprocess is represented within Emacs by a Lisp object which is also
called a ``process.''  Lisp programs can use this object to communicate
with the subprocess or to control it.  For example, you can send
signals, obtain status information, receive output from the process, or
send input to it.

@defun processp object
32 33
This function returns @code{t} if @var{object} represents an Emacs
subprocess, @code{nil} otherwise.
Glenn Morris's avatar
Glenn Morris committed
34 35
@end defun

36 37 38 39
  In addition to subprocesses of the current Emacs session, you can
also access other processes running on your machine.  @xref{System
Processes}.

Glenn Morris's avatar
Glenn Morris committed
40 41 42 43 44 45 46 47 48 49 50 51 52
@menu
* Subprocess Creation::      Functions that start subprocesses.
* Shell Arguments::          Quoting an argument to pass it to a shell.
* Synchronous Processes::    Details of using synchronous subprocesses.
* Asynchronous Processes::   Starting up an asynchronous subprocess.
* Deleting Processes::       Eliminating an asynchronous subprocess.
* Process Information::      Accessing run-status and other attributes.
* Input to Processes::       Sending input to an asynchronous subprocess.
* Signals to Processes::     Stopping, continuing or interrupting
                               an asynchronous subprocess.
* Output from Processes::    Collecting output from an asynchronous subprocess.
* Sentinels::                Sentinels run when process run-status changes.
* Query Before Exit::        Whether to query if exiting will kill a process.
53
* System Processes::         Accessing other processes running on your system.
Glenn Morris's avatar
Glenn Morris committed
54 55 56 57 58 59 60
* Transaction Queues::	     Transaction-based communication with subprocesses.
* Network::                  Opening network connections.
* Network Servers::          Network servers let Emacs accept net connections.
* Datagrams::                UDP network connections.
* Low-Level Network::        Lower-level but more general function
                               to create connections and servers.
* Misc Network::             Additional relevant functions for network connections.
61
* Serial Ports::             Communicating with serial ports.
Glenn Morris's avatar
Glenn Morris committed
62 63 64 65 66 67
* Byte Packing::             Using bindat to pack and unpack binary data.
@end menu

@node Subprocess Creation
@section Functions that Create Subprocesses

68
  There are three primitives that create a new subprocess in which to run
Glenn Morris's avatar
Glenn Morris committed
69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196
a program.  One of them, @code{start-process}, creates an asynchronous
process and returns a process object (@pxref{Asynchronous Processes}).
The other two, @code{call-process} and @code{call-process-region},
create a synchronous process and do not return a process object
(@pxref{Synchronous Processes}).

  Synchronous and asynchronous processes are explained in the following
sections.  Since the three functions are all called in a similar
fashion, their common arguments are described here.

@cindex execute program
@cindex @code{PATH} environment variable
@cindex @code{HOME} environment variable
  In all cases, the function's @var{program} argument specifies the
program to be run.  An error is signaled if the file is not found or
cannot be executed.  If the file name is relative, the variable
@code{exec-path} contains a list of directories to search.  Emacs
initializes @code{exec-path} when it starts up, based on the value of
the environment variable @code{PATH}.  The standard file name
constructs, @samp{~}, @samp{.}, and @samp{..}, are interpreted as
usual in @code{exec-path}, but environment variable substitutions
(@samp{$HOME}, etc.) are not recognized; use
@code{substitute-in-file-name} to perform them (@pxref{File Name
Expansion}).  @code{nil} in this list refers to
@code{default-directory}.

  Executing a program can also try adding suffixes to the specified
name:

@defvar exec-suffixes
This variable is a list of suffixes (strings) to try adding to the
specified program file name.  The list should include @code{""} if you
want the name to be tried exactly as specified.  The default value is
system-dependent.
@end defvar

  @strong{Please note:} The argument @var{program} contains only the
name of the program; it may not contain any command-line arguments.  You
must use @var{args} to provide those.

  Each of the subprocess-creating functions has a @var{buffer-or-name}
argument which specifies where the standard output from the program will
go.  It should be a buffer or a buffer name; if it is a buffer name,
that will create the buffer if it does not already exist.  It can also
be @code{nil}, which says to discard the output unless a filter function
handles it.  (@xref{Filter Functions}, and @ref{Read and Print}.)
Normally, you should avoid having multiple processes send output to the
same buffer because their output would be intermixed randomly.

@cindex program arguments
  All three of the subprocess-creating functions have a @code{&rest}
argument, @var{args}.  The @var{args} must all be strings, and they are
supplied to @var{program} as separate command line arguments.  Wildcard
characters and other shell constructs have no special meanings in these
strings, since the strings are passed directly to the specified program.

  The subprocess gets its current directory from the value of
@code{default-directory} (@pxref{File Name Expansion}).

@cindex environment variables, subprocesses
  The subprocess inherits its environment from Emacs, but you can
specify overrides for it with @code{process-environment}.  @xref{System
Environment}.

@defvar exec-directory
@pindex movemail
The value of this variable is a string, the name of a directory that
contains programs that come with GNU Emacs, programs intended for Emacs
to invoke.  The program @code{movemail} is an example of such a program;
Rmail uses it to fetch new mail from an inbox.
@end defvar

@defopt exec-path
The value of this variable is a list of directories to search for
programs to run in subprocesses.  Each element is either the name of a
directory (i.e., a string), or @code{nil}, which stands for the default
directory (which is the value of @code{default-directory}).
@cindex program directories

The value of @code{exec-path} is used by @code{call-process} and
@code{start-process} when the @var{program} argument is not an absolute
file name.
@end defopt

@node Shell Arguments
@section Shell Arguments
@cindex arguments for shell commands
@cindex shell command arguments

  Lisp programs sometimes need to run a shell and give it a command
that contains file names that were specified by the user.  These
programs ought to be able to support any valid file name.  But the shell
gives special treatment to certain characters, and if these characters
occur in the file name, they will confuse the shell.  To handle these
characters, use the function @code{shell-quote-argument}:

@defun shell-quote-argument argument
This function returns a string which represents, in shell syntax,
an argument whose actual contents are @var{argument}.  It should
work reliably to concatenate the return value into a shell command
and then pass it to a shell for execution.

Precisely what this function does depends on your operating system.  The
function is designed to work with the syntax of your system's standard
shell; if you use an unusual shell, you will need to redefine this
function.

@example
;; @r{This example shows the behavior on GNU and Unix systems.}
(shell-quote-argument "foo > bar")
     @result{} "foo\\ \\>\\ bar"

;; @r{This example shows the behavior on MS-DOS and MS-Windows.}
(shell-quote-argument "foo > bar")
     @result{} "\"foo > bar\""
@end example

Here's an example of using @code{shell-quote-argument} to construct
a shell command:

@example
(concat "diff -c "
        (shell-quote-argument oldfile)
        " "
        (shell-quote-argument newfile))
@end example
@end defun

197
@cindex quoting and unquoting shell command line
198 199 200
  The following two functions are useful for creating shell commands
from individual argument strings, and taking shell command lines apart
into individual arguments.
201 202 203 204

@defun split-string-and-unquote string &optional separators
This function splits @var{string} into substrings at matches for the
regular expression @var{separators}, like @code{split-string} does
205 206
(@pxref{Creating Strings}); in addition, it removes quoting from the
substrings.  It then makes a list of the substrings and returns it.
207

Chong Yidong's avatar
Chong Yidong committed
208 209 210
If @var{separators} is omitted or @code{nil}, it defaults to
@code{"\\s-+"}, which is a regular expression that matches one or more
characters with whitespace syntax (@pxref{Syntax Class Table}).
211

212 213 214 215
This function performs two types of quoting: enclosing a whole string
in double quotes @code{"@dots{}"}, and quoting individual characters
with a backslash escape @samp{\}.  The latter is also used in Lisp
strings, so this function can handle those as well.
216 217 218 219
@end defun

@defun combine-and-quote-strings list-of-strings &optional separator
This function concatenates @var{list-of-strings} into a single string,
220 221 222 223
quoting each string as necessary.  It also sticks the @var{separator}
string between each pair of strings; if @var{separator} is omitted or
@code{nil}, it defaults to @code{" "}.  The return value is the
resulting string.
224 225 226 227 228 229 230 231 232

The strings in @var{list-of-strings} that need quoting are those that
include @var{separator} as their substring.  Quoting a string encloses
it in double quotes @code{"@dots{}"}.  In the simplest case, if you
are consing a shell command from the individual command-line
arguments, every argument that includes embedded blanks will be
quoted.
@end defun

Glenn Morris's avatar
Glenn Morris committed
233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487
@node Synchronous Processes
@section Creating a Synchronous Process
@cindex synchronous subprocess

  After a @dfn{synchronous process} is created, Emacs waits for the
process to terminate before continuing.  Starting Dired on GNU or
Unix@footnote{On other systems, Emacs uses a Lisp emulation of
@code{ls}; see @ref{Contents of Directories}.} is an example of this: it
runs @code{ls} in a synchronous process, then modifies the output
slightly.  Because the process is synchronous, the entire directory
listing arrives in the buffer before Emacs tries to do anything with it.

  While Emacs waits for the synchronous subprocess to terminate, the
user can quit by typing @kbd{C-g}.  The first @kbd{C-g} tries to kill
the subprocess with a @code{SIGINT} signal; but it waits until the
subprocess actually terminates before quitting.  If during that time the
user types another @kbd{C-g}, that kills the subprocess instantly with
@code{SIGKILL} and quits immediately (except on MS-DOS, where killing
other processes doesn't work).  @xref{Quitting}.

  The synchronous subprocess functions return an indication of how the
process terminated.

  The output from a synchronous subprocess is generally decoded using a
coding system, much like text read from a file.  The input sent to a
subprocess by @code{call-process-region} is encoded using a coding
system, much like text written into a file.  @xref{Coding Systems}.

@defun call-process program &optional infile destination display &rest args
This function calls @var{program} in a separate process and waits for
it to finish.

The standard input for the process comes from file @var{infile} if
@var{infile} is not @code{nil}, and from the null device otherwise.
The argument @var{destination} says where to put the process output.
Here are the possibilities:

@table @asis
@item a buffer
Insert the output in that buffer, before point.  This includes both the
standard output stream and the standard error stream of the process.

@item a string
Insert the output in a buffer with that name, before point.

@item @code{t}
Insert the output in the current buffer, before point.

@item @code{nil}
Discard the output.

@item 0
Discard the output, and return @code{nil} immediately without waiting
for the subprocess to finish.

In this case, the process is not truly synchronous, since it can run in
parallel with Emacs; but you can think of it as synchronous in that
Emacs is essentially finished with the subprocess as soon as this
function returns.

MS-DOS doesn't support asynchronous subprocesses, so this option doesn't
work there.

@item @code{(@var{real-destination} @var{error-destination})}
Keep the standard output stream separate from the standard error stream;
deal with the ordinary output as specified by @var{real-destination},
and dispose of the error output according to @var{error-destination}.
If @var{error-destination} is @code{nil}, that means to discard the
error output, @code{t} means mix it with the ordinary output, and a
string specifies a file name to redirect error output into.

You can't directly specify a buffer to put the error output in; that is
too difficult to implement.  But you can achieve this result by sending
the error output to a temporary file and then inserting the file into a
buffer.
@end table

If @var{display} is non-@code{nil}, then @code{call-process} redisplays
the buffer as output is inserted.  (However, if the coding system chosen
for decoding output is @code{undecided}, meaning deduce the encoding
from the actual data, then redisplay sometimes cannot continue once
non-@acronym{ASCII} characters are encountered.  There are fundamental
reasons why it is hard to fix this; see @ref{Output from Processes}.)

Otherwise the function @code{call-process} does no redisplay, and the
results become visible on the screen only when Emacs redisplays that
buffer in the normal course of events.

The remaining arguments, @var{args}, are strings that specify command
line arguments for the program.

The value returned by @code{call-process} (unless you told it not to
wait) indicates the reason for process termination.  A number gives the
exit status of the subprocess; 0 means success, and any other value
means failure.  If the process terminated with a signal,
@code{call-process} returns a string describing the signal.

In the examples below, the buffer @samp{foo} is current.

@smallexample
@group
(call-process "pwd" nil t)
     @result{} 0

---------- Buffer: foo ----------
/usr/user/lewis/manual
---------- Buffer: foo ----------
@end group

@group
(call-process "grep" nil "bar" nil "lewis" "/etc/passwd")
     @result{} 0

---------- Buffer: bar ----------
lewis:5LTsHm66CSWKg:398:21:Bil Lewis:/user/lewis:/bin/csh

---------- Buffer: bar ----------
@end group
@end smallexample

Here is a good example of the use of @code{call-process}, which used to
be found in the definition of @code{insert-directory}:

@smallexample
@group
(call-process insert-directory-program nil t nil @var{switches}
              (if full-directory-p
                  (concat (file-name-as-directory file) ".")
                file))
@end group
@end smallexample
@end defun

@defun process-file program &optional infile buffer display &rest args
This function processes files synchronously in a separate process.  It
is similar to @code{call-process} but may invoke a file handler based
on the value of the variable @code{default-directory}.  The current
working directory of the subprocess is @code{default-directory}.

The arguments are handled in almost the same way as for
@code{call-process}, with the following differences:

Some file handlers may not support all combinations and forms of the
arguments @var{infile}, @var{buffer}, and @var{display}.  For example,
some file handlers might behave as if @var{display} were @code{nil},
regardless of the value actually passed.  As another example, some
file handlers might not support separating standard output and error
output by way of the @var{buffer} argument.

If a file handler is invoked, it determines the program to run based
on the first argument @var{program}.  For instance, consider that a
handler for remote files is invoked.  Then the path that is used for
searching the program might be different than @code{exec-path}.

The second argument @var{infile} may invoke a file handler.  The file
handler could be different from the handler chosen for the
@code{process-file} function itself.  (For example,
@code{default-directory} could be on a remote host, whereas
@var{infile} is on another remote host.  Or @code{default-directory}
could be non-special, whereas @var{infile} is on a remote host.)

If @var{buffer} is a list of the form @code{(@var{real-destination}
@var{error-destination})}, and @var{error-destination} names a file,
then the same remarks as for @var{infile} apply.

The remaining arguments (@var{args}) will be passed to the process
verbatim.  Emacs is not involved in processing file names that are
present in @var{args}.  To avoid confusion, it may be best to avoid
absolute file names in @var{args}, but rather to specify all file
names as relative to @code{default-directory}.  The function
@code{file-relative-name} is useful for constructing such relative
file names.
@end defun

@defun call-process-region start end program &optional delete destination display &rest args
This function sends the text from @var{start} to @var{end} as
standard input to a process running @var{program}.  It deletes the text
sent if @var{delete} is non-@code{nil}; this is useful when
@var{destination} is @code{t}, to insert the output in the current
buffer in place of the input.

The arguments @var{destination} and @var{display} control what to do
with the output from the subprocess, and whether to update the display
as it comes in.  For details, see the description of
@code{call-process}, above.  If @var{destination} is the integer 0,
@code{call-process-region} discards the output and returns @code{nil}
immediately, without waiting for the subprocess to finish (this only
works if asynchronous subprocesses are supported).

The remaining arguments, @var{args}, are strings that specify command
line arguments for the program.

The return value of @code{call-process-region} is just like that of
@code{call-process}: @code{nil} if you told it to return without
waiting; otherwise, a number or string which indicates how the
subprocess terminated.

In the following example, we use @code{call-process-region} to run the
@code{cat} utility, with standard input being the first five characters
in buffer @samp{foo} (the word @samp{input}).  @code{cat} copies its
standard input into its standard output.  Since the argument
@var{destination} is @code{t}, this output is inserted in the current
buffer.

@smallexample
@group
---------- Buffer: foo ----------
input@point{}
---------- Buffer: foo ----------
@end group

@group
(call-process-region 1 6 "cat" nil t)
     @result{} 0

---------- Buffer: foo ----------
inputinput@point{}
---------- Buffer: foo ----------
@end group
@end smallexample

  The @code{shell-command-on-region} command uses
@code{call-process-region} like this:

@smallexample
@group
(call-process-region
 start end
 shell-file-name      ; @r{Name of program.}
 nil                  ; @r{Do not delete region.}
 buffer               ; @r{Send output to @code{buffer}.}
 nil                  ; @r{No redisplay during output.}
 "-c" command)        ; @r{Arguments for the shell.}
@end group
@end smallexample
@end defun

@defun call-process-shell-command command &optional infile destination display &rest args
This function executes the shell command @var{command} synchronously
in a separate process.  The final arguments @var{args} are additional
arguments to add at the end of @var{command}.  The other arguments
are handled as in @code{call-process}.
@end defun

@defun process-file-shell-command command &optional infile destination display &rest args
This function is like @code{call-process-shell-command}, but uses
@code{process-file} internally.  Depending on @code{default-directory},
@var{command} can be executed also on remote hosts.
@end defun

@defun shell-command-to-string command
This function executes @var{command} (a string) as a shell command,
then returns the command's output as a string.
@end defun

488 489 490 491 492 493 494 495 496 497 498 499 500 501 502
@defun process-lines program &rest args
This function runs @var{program} in a separate process, waits for it
to finish, and returns its output as a list of strings.  Each string
in the list holds a single line of text output by the program; the
end-of-line characters are stripped from each line.  The arguments
beyond @var{program}, @var{args}, are strings that specify
command-line arguments with which to run the program.

If @var{program} exits with a non-zero exit status, this function
signals an error.

This function works by calling @code{call-process}, so program output
is decoded in the same way as for @code{call-process}.
@end defun

Glenn Morris's avatar
Glenn Morris committed
503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735
@node Asynchronous Processes
@section Creating an Asynchronous Process
@cindex asynchronous subprocess

  After an @dfn{asynchronous process} is created, Emacs and the subprocess
both continue running immediately.  The process thereafter runs
in parallel with Emacs, and the two can communicate with each other
using the functions described in the following sections.  However,
communication is only partially asynchronous: Emacs sends data to the
process only when certain functions are called, and Emacs accepts data
from the process only when Emacs is waiting for input or for a time
delay.

  Here we describe how to create an asynchronous process.

@defun start-process name buffer-or-name program &rest args
This function creates a new asynchronous subprocess and starts the
program @var{program} running in it.  It returns a process object that
stands for the new subprocess in Lisp.  The argument @var{name}
specifies the name for the process object; if a process with this name
already exists, then @var{name} is modified (by appending @samp{<1>},
etc.) to be unique.  The buffer @var{buffer-or-name} is the buffer to
associate with the process.

The remaining arguments, @var{args}, are strings that specify command
line arguments for the program.

In the example below, the first process is started and runs (rather,
sleeps) for 100 seconds.  Meanwhile, the second process is started, and
given the name @samp{my-process<1>} for the sake of uniqueness.  It
inserts the directory listing at the end of the buffer @samp{foo},
before the first process finishes.  Then it finishes, and a message to
that effect is inserted in the buffer.  Much later, the first process
finishes, and another message is inserted in the buffer for it.

@smallexample
@group
(start-process "my-process" "foo" "sleep" "100")
     @result{} #<process my-process>
@end group

@group
(start-process "my-process" "foo" "ls" "-l" "/user/lewis/bin")
     @result{} #<process my-process<1>>

---------- Buffer: foo ----------
total 2
lrwxrwxrwx  1 lewis     14 Jul 22 10:12 gnuemacs --> /emacs
-rwxrwxrwx  1 lewis     19 Jul 30 21:02 lemon

Process my-process<1> finished

Process my-process finished
---------- Buffer: foo ----------
@end group
@end smallexample
@end defun

@defun start-file-process name buffer-or-name program &rest args
Like @code{start-process}, this function starts a new asynchronous
subprocess running @var{program} in it, and returns its process
object---when @code{default-directory} is not a magic file name.

If @code{default-directory} is magic, the function invokes its file
handler instead.  This handler ought to run @var{program}, perhaps on
the local host, perhaps on a remote host that corresponds to
@code{default-directory}.  In the latter case, the local part of
@code{default-directory} becomes the working directory of the process.

This function does not try to invoke file name handlers for
@var{program} or for the @var{program-args}.

Depending on the implementation of the file handler, it might not be
possible to apply @code{process-filter} or @code{process-sentinel} to
the resulting process object (@pxref{Filter Functions}, @pxref{Sentinels}).

Some file handlers may not support @code{start-file-process} (for
example @code{ange-ftp-hook-function}).  In such cases, the function
does nothing and returns @code{nil}.
@end defun

@defun start-process-shell-command name buffer-or-name command &rest command-args
This function is like @code{start-process} except that it uses a shell
to execute the specified command.  The argument @var{command} is a shell
command name, and @var{command-args} are the arguments for the shell
command.  The variable @code{shell-file-name} specifies which shell to
use.

The point of running a program through the shell, rather than directly
with @code{start-process}, is so that you can employ shell features such
as wildcards in the arguments.  It follows that if you include an
arbitrary user-specified arguments in the command, you should quote it
with @code{shell-quote-argument} first, so that any special shell
characters do @emph{not} have their special shell meanings.  @xref{Shell
Arguments}.
@end defun

@defun start-file-process-shell-command name buffer-or-name command &rest command-args
This function is like @code{start-process-shell-command}, but uses
@code{start-file-process} internally.  By this, @var{command} can be
executed also on remote hosts, depending on @code{default-directory}.
@end defun

@defvar process-connection-type
@cindex pipes
@cindex @acronym{PTY}s
This variable controls the type of device used to communicate with
asynchronous subprocesses.  If it is non-@code{nil}, then @acronym{PTY}s are
used, when available.  Otherwise, pipes are used.

@acronym{PTY}s are usually preferable for processes visible to the user, as
in Shell mode, because they allow job control (@kbd{C-c}, @kbd{C-z},
etc.) to work between the process and its children, whereas pipes do
not.  For subprocesses used for internal purposes by programs, it is
often better to use a pipe, because they are more efficient.  In
addition, the total number of @acronym{PTY}s is limited on many systems and
it is good not to waste them.

The value of @code{process-connection-type} takes effect when
@code{start-process} is called.  So you can specify how to communicate
with one subprocess by binding the variable around the call to
@code{start-process}.

@smallexample
@group
(let ((process-connection-type nil))  ; @r{Use a pipe.}
  (start-process @dots{}))
@end group
@end smallexample

To determine whether a given subprocess actually got a pipe or a
@acronym{PTY}, use the function @code{process-tty-name} (@pxref{Process
Information}).
@end defvar

@node Deleting Processes
@section Deleting Processes
@cindex deleting processes

  @dfn{Deleting a process} disconnects Emacs immediately from the
subprocess.  Processes are deleted automatically after they terminate,
but not necessarily right away.  You can delete a process explicitly
at any time.  If you delete a terminated process explicitly before it
is deleted automatically, no harm results.  Deleting a running
process sends a signal to terminate it (and its child processes if
any), and calls the process sentinel if it has one.  @xref{Sentinels}.

  When a process is deleted, the process object itself continues to
exist as long as other Lisp objects point to it.  All the Lisp
primitives that work on process objects accept deleted processes, but
those that do I/O or send signals will report an error.  The process
mark continues to point to the same place as before, usually into a
buffer where output from the process was being inserted.

@defopt delete-exited-processes
This variable controls automatic deletion of processes that have
terminated (due to calling @code{exit} or to a signal).  If it is
@code{nil}, then they continue to exist until the user runs
@code{list-processes}.  Otherwise, they are deleted immediately after
they exit.
@end defopt

@defun delete-process process
This function deletes a process, killing it with a @code{SIGKILL}
signal.  The argument may be a process, the name of a process, a
buffer, or the name of a buffer.  (A buffer or buffer-name stands for
the process that @code{get-buffer-process} returns.)  Calling
@code{delete-process} on a running process terminates it, updates the
process status, and runs the sentinel (if any) immediately.  If the
process has already terminated, calling @code{delete-process} has no
effect on its status, or on the running of its sentinel (which will
happen sooner or later).

@smallexample
@group
(delete-process "*shell*")
     @result{} nil
@end group
@end smallexample
@end defun

@node Process Information
@section Process Information

  Several functions return information about processes.
@code{list-processes} is provided for interactive use.

@deffn Command list-processes &optional query-only
This command displays a listing of all living processes.  In addition,
it finally deletes any process whose status was @samp{Exited} or
@samp{Signaled}.  It returns @code{nil}.

If @var{query-only} is non-@code{nil} then it lists only processes
whose query flag is non-@code{nil}.  @xref{Query Before Exit}.
@end deffn

@defun process-list
This function returns a list of all processes that have not been deleted.

@smallexample
@group
(process-list)
     @result{} (#<process display-time> #<process shell>)
@end group
@end smallexample
@end defun

@defun get-process name
This function returns the process named @var{name}, or @code{nil} if
there is none.  An error is signaled if @var{name} is not a string.

@smallexample
@group
(get-process "shell")
     @result{} #<process shell>
@end group
@end smallexample
@end defun

@defun process-command process
This function returns the command that was executed to start
@var{process}.  This is a list of strings, the first string being the
program executed and the rest of the strings being the arguments that
were given to the program.

@smallexample
@group
(process-command (get-process "shell"))
     @result{} ("/bin/csh" "-i")
@end group
@end smallexample
@end defun

736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778
@defun process-contact process &optional key

This function returns information about how a network or serial
process was set up.  For a network process, when @var{key} is
@code{nil}, it returns @code{(@var{hostname} @var{service})} which
specifies what you connected to.  For a serial process, when @var{key}
is @code{nil}, it returns @code{(@var{port} @var{speed})}.  For an
ordinary child process, this function always returns @code{t}.

If @var{key} is @code{t}, the value is the complete status information
for the connection, server, or serial port; that is, the list of
keywords and values specified in @code{make-network-process} or
@code{make-serial-process}, except that some of the values represent
the current status instead of what you specified.

For a network process:

@table @code
@item :buffer
The associated value is the process buffer.
@item :filter
The associated value is the process filter function.
@item :sentinel
The associated value is the process sentinel function.
@item :remote
In a connection, the address in internal format of the remote peer.
@item :local
The local address, in internal format.
@item :service
In a server, if you specified @code{t} for @var{service},
this value is the actual port number.
@end table

@code{:local} and @code{:remote} are included even if they were not
specified explicitly in @code{make-network-process}.

For a serial process, see @code{make-serial-process} and
@code{serial-process-configure} for a list of keys.

If @var{key} is a keyword, the function returns the value corresponding
to that keyword.
@end defun

Glenn Morris's avatar
Glenn Morris committed
779 780 781 782 783 784 785 786 787 788 789 790 791 792
@defun process-id process
This function returns the @acronym{PID} of @var{process}.  This is an
integer that distinguishes the process @var{process} from all other
processes running on the same computer at the current time.  The
@acronym{PID} of a process is chosen by the operating system kernel when the
process is started and remains constant as long as the process exists.
@end defun

@defun process-name process
This function returns the name of @var{process}.
@end defun

@defun process-status process-name
This function returns the status of @var{process-name} as a symbol.
793 794
The argument @var{process-name} must be a process, a buffer, or a
process name (a string).
Glenn Morris's avatar
Glenn Morris committed
795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840

The possible values for an actual subprocess are:

@table @code
@item run
for a process that is running.
@item stop
for a process that is stopped but continuable.
@item exit
for a process that has exited.
@item signal
for a process that has received a fatal signal.
@item open
for a network connection that is open.
@item closed
for a network connection that is closed.  Once a connection
is closed, you cannot reopen it, though you might be able to open
a new connection to the same place.
@item connect
for a non-blocking connection that is waiting to complete.
@item failed
for a non-blocking connection that has failed to complete.
@item listen
for a network server that is listening.
@item nil
if @var{process-name} is not the name of an existing process.
@end table

@smallexample
@group
(process-status (get-buffer "*shell*"))
     @result{} run
@end group
@group
x
     @result{} #<process xx<1>>
(process-status x)
     @result{} exit
@end group
@end smallexample

For a network connection, @code{process-status} returns one of the symbols
@code{open} or @code{closed}.  The latter means that the other side
closed the connection, or Emacs did @code{delete-process}.
@end defun

841 842 843 844 845 846
@defun process-type process
This function returns the symbol @code{network} for a network
connection or server, @code{serial} for a serial port connection, or
@code{real} for a real subprocess.
@end defun

Glenn Morris's avatar
Glenn Morris committed
847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980
@defun process-exit-status process
This function returns the exit status of @var{process} or the signal
number that killed it.  (Use the result of @code{process-status} to
determine which of those it is.)  If @var{process} has not yet
terminated, the value is 0.
@end defun

@defun process-tty-name process
This function returns the terminal name that @var{process} is using for
its communication with Emacs---or @code{nil} if it is using pipes
instead of a terminal (see @code{process-connection-type} in
@ref{Asynchronous Processes}).
@end defun

@defun process-coding-system process
@anchor{Coding systems for a subprocess}
This function returns a cons cell describing the coding systems in use
for decoding output from @var{process} and for encoding input to
@var{process} (@pxref{Coding Systems}).  The value has this form:

@example
(@var{coding-system-for-decoding} . @var{coding-system-for-encoding})
@end example
@end defun

@defun set-process-coding-system process &optional decoding-system encoding-system
This function specifies the coding systems to use for subsequent output
from and input to @var{process}.  It will use @var{decoding-system} to
decode subprocess output, and @var{encoding-system} to encode subprocess
input.
@end defun

  Every process also has a property list that you can use to store
miscellaneous values associated with the process.

@defun process-get process propname
This function returns the value of the @var{propname} property
of @var{process}.
@end defun

@defun process-put process propname value
This function sets the value of the @var{propname} property
of @var{process} to @var{value}.
@end defun

@defun process-plist process
This function returns the process plist of @var{process}.
@end defun

@defun set-process-plist process plist
This function sets the process plist of @var{process} to @var{plist}.
@end defun

@node Input to Processes
@section Sending Input to Processes
@cindex process input

  Asynchronous subprocesses receive input when it is sent to them by
Emacs, which is done with the functions in this section.  You must
specify the process to send input to, and the input data to send.  The
data appears on the ``standard input'' of the subprocess.

  Some operating systems have limited space for buffered input in a
@acronym{PTY}.  On these systems, Emacs sends an @acronym{EOF}
periodically amidst the other characters, to force them through.  For
most programs, these @acronym{EOF}s do no harm.

  Subprocess input is normally encoded using a coding system before the
subprocess receives it, much like text written into a file.  You can use
@code{set-process-coding-system} to specify which coding system to use
(@pxref{Process Information}).  Otherwise, the coding system comes from
@code{coding-system-for-write}, if that is non-@code{nil}; or else from
the defaulting mechanism (@pxref{Default Coding Systems}).

  Sometimes the system is unable to accept input for that process,
because the input buffer is full.  When this happens, the send functions
wait a short while, accepting output from subprocesses, and then try
again.  This gives the subprocess a chance to read more of its pending
input and make space in the buffer.  It also allows filters, sentinels
and timers to run---so take account of that in writing your code.

  In these functions, the @var{process} argument can be a process or
the name of a process, or a buffer or buffer name (which stands
for a process via @code{get-buffer-process}).  @code{nil} means
the current buffer's process.

@defun process-send-string process string
This function sends @var{process} the contents of @var{string} as
standard input.  If it is @code{nil}, the current buffer's process is used.

  The function returns @code{nil}.

@smallexample
@group
(process-send-string "shell<1>" "ls\n")
     @result{} nil
@end group


@group
---------- Buffer: *shell* ----------
...
introduction.texi               syntax-tables.texi~
introduction.texi~              text.texi
introduction.txt                text.texi~
...
---------- Buffer: *shell* ----------
@end group
@end smallexample
@end defun

@defun process-send-region process start end
This function sends the text in the region defined by @var{start} and
@var{end} as standard input to @var{process}.

An error is signaled unless both @var{start} and @var{end} are
integers or markers that indicate positions in the current buffer.  (It
is unimportant which number is larger.)
@end defun

@defun process-send-eof &optional process
This function makes @var{process} see an end-of-file in its
input.  The @acronym{EOF} comes after any text already sent to it.

The function returns @var{process}.

@smallexample
@group
(process-send-eof "shell")
     @result{} "shell"
@end group
@end smallexample
@end defun

981 982
@defun process-running-child-p &optional process
This function will tell you whether a @var{process} has given control of
Glenn Morris's avatar
Glenn Morris committed
983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081
its terminal to its own child process.  The value is @code{t} if this is
true, or if Emacs cannot tell; it is @code{nil} if Emacs can be certain
that this is not so.
@end defun

@node Signals to Processes
@section Sending Signals to Processes
@cindex process signals
@cindex sending signals
@cindex signals

  @dfn{Sending a signal} to a subprocess is a way of interrupting its
activities.  There are several different signals, each with its own
meaning.  The set of signals and their names is defined by the operating
system.  For example, the signal @code{SIGINT} means that the user has
typed @kbd{C-c}, or that some analogous thing has happened.

  Each signal has a standard effect on the subprocess.  Most signals
kill the subprocess, but some stop or resume execution instead.  Most
signals can optionally be handled by programs; if the program handles
the signal, then we can say nothing in general about its effects.

  You can send signals explicitly by calling the functions in this
section.  Emacs also sends signals automatically at certain times:
killing a buffer sends a @code{SIGHUP} signal to all its associated
processes; killing Emacs sends a @code{SIGHUP} signal to all remaining
processes.  (@code{SIGHUP} is a signal that usually indicates that the
user hung up the phone.)

  Each of the signal-sending functions takes two optional arguments:
@var{process} and @var{current-group}.

  The argument @var{process} must be either a process, a process
name, a buffer, a buffer name, or @code{nil}.  A buffer or buffer name
stands for a process through @code{get-buffer-process}.  @code{nil}
stands for the process associated with the current buffer.  An error
is signaled if @var{process} does not identify a process.

  The argument @var{current-group} is a flag that makes a difference
when you are running a job-control shell as an Emacs subprocess.  If it
is non-@code{nil}, then the signal is sent to the current process-group
of the terminal that Emacs uses to communicate with the subprocess.  If
the process is a job-control shell, this means the shell's current
subjob.  If it is @code{nil}, the signal is sent to the process group of
the immediate subprocess of Emacs.  If the subprocess is a job-control
shell, this is the shell itself.

  The flag @var{current-group} has no effect when a pipe is used to
communicate with the subprocess, because the operating system does not
support the distinction in the case of pipes.  For the same reason,
job-control shells won't work when a pipe is used.  See
@code{process-connection-type} in @ref{Asynchronous Processes}.

@defun interrupt-process &optional process current-group
This function interrupts the process @var{process} by sending the
signal @code{SIGINT}.  Outside of Emacs, typing the ``interrupt
character'' (normally @kbd{C-c} on some systems, and @code{DEL} on
others) sends this signal.  When the argument @var{current-group} is
non-@code{nil}, you can think of this function as ``typing @kbd{C-c}''
on the terminal by which Emacs talks to the subprocess.
@end defun

@defun kill-process &optional process current-group
This function kills the process @var{process} by sending the
signal @code{SIGKILL}.  This signal kills the subprocess immediately,
and cannot be handled by the subprocess.
@end defun

@defun quit-process &optional process current-group
This function sends the signal @code{SIGQUIT} to the process
@var{process}.  This signal is the one sent by the ``quit
character'' (usually @kbd{C-b} or @kbd{C-\}) when you are not inside
Emacs.
@end defun

@defun stop-process &optional process current-group
This function stops the process @var{process} by sending the
signal @code{SIGTSTP}.  Use @code{continue-process} to resume its
execution.

Outside of Emacs, on systems with job control, the ``stop character''
(usually @kbd{C-z}) normally sends this signal.  When
@var{current-group} is non-@code{nil}, you can think of this function as
``typing @kbd{C-z}'' on the terminal Emacs uses to communicate with the
subprocess.
@end defun

@defun continue-process &optional process current-group
This function resumes execution of the process @var{process} by sending
it the signal @code{SIGCONT}.  This presumes that @var{process} was
stopped previously.
@end defun

@defun signal-process process signal
This function sends a signal to process @var{process}.  The argument
@var{signal} specifies which signal to send; it should be an integer.

The @var{process} argument can be a system process @acronym{ID}; that
allows you to send signals to processes that are not children of
1082
Emacs.  @xref{System Processes}.
Glenn Morris's avatar
Glenn Morris committed
1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305
@end defun

@node Output from Processes
@section Receiving Output from Processes
@cindex process output
@cindex output from processes

  There are two ways to receive the output that a subprocess writes to
its standard output stream.  The output can be inserted in a buffer,
which is called the associated buffer of the process, or a function
called the @dfn{filter function} can be called to act on the output.  If
the process has no buffer and no filter function, its output is
discarded.

  When a subprocess terminates, Emacs reads any pending output,
then stops reading output from that subprocess.  Therefore, if the
subprocess has children that are still live and still producing
output, Emacs won't receive that output.

  Output from a subprocess can arrive only while Emacs is waiting: when
reading terminal input, in @code{sit-for} and @code{sleep-for}
(@pxref{Waiting}), and in @code{accept-process-output} (@pxref{Accepting
Output}).  This minimizes the problem of timing errors that usually
plague parallel programming.  For example, you can safely create a
process and only then specify its buffer or filter function; no output
can arrive before you finish, if the code in between does not call any
primitive that waits.

@defvar process-adaptive-read-buffering
On some systems, when Emacs reads the output from a subprocess, the
output data is read in very small blocks, potentially resulting in
very poor performance.  This behavior can be remedied to some extent
by setting the variable @var{process-adaptive-read-buffering} to a
non-@code{nil} value (the default), as it will automatically delay reading
from such processes, thus allowing them to produce more output before
Emacs tries to read it.
@end defvar

  It is impossible to separate the standard output and standard error
streams of the subprocess, because Emacs normally spawns the subprocess
inside a pseudo-TTY, and a pseudo-TTY has only one output channel.  If
you want to keep the output to those streams separate, you should
redirect one of them to a file---for example, by using an appropriate
shell command.

@menu
* Process Buffers::         If no filter, output is put in a buffer.
* Filter Functions::        Filter functions accept output from the process.
* Decoding Output::         Filters can get unibyte or multibyte strings.
* Accepting Output::        How to wait until process output arrives.
@end menu

@node Process Buffers
@subsection Process Buffers

  A process can (and usually does) have an @dfn{associated buffer},
which is an ordinary Emacs buffer that is used for two purposes: storing
the output from the process, and deciding when to kill the process.  You
can also use the buffer to identify a process to operate on, since in
normal practice only one process is associated with any given buffer.
Many applications of processes also use the buffer for editing input to
be sent to the process, but this is not built into Emacs Lisp.

  Unless the process has a filter function (@pxref{Filter Functions}),
its output is inserted in the associated buffer.  The position to insert
the output is determined by the @code{process-mark}, which is then
updated to point to the end of the text just inserted.  Usually, but not
always, the @code{process-mark} is at the end of the buffer.

@defun process-buffer process
This function returns the associated buffer of the process
@var{process}.

@smallexample
@group
(process-buffer (get-process "shell"))
     @result{} #<buffer *shell*>
@end group
@end smallexample
@end defun

@defun process-mark process
This function returns the process marker for @var{process}, which is the
marker that says where to insert output from the process.

If @var{process} does not have a buffer, @code{process-mark} returns a
marker that points nowhere.

Insertion of process output in a buffer uses this marker to decide where
to insert, and updates it to point after the inserted text.  That is why
successive batches of output are inserted consecutively.

Filter functions normally should use this marker in the same fashion
as is done by direct insertion of output in the buffer.  A good
example of a filter function that uses @code{process-mark} is found at
the end of the following section.

When the user is expected to enter input in the process buffer for
transmission to the process, the process marker separates the new input
from previous output.
@end defun

@defun set-process-buffer process buffer
This function sets the buffer associated with @var{process} to
@var{buffer}.  If @var{buffer} is @code{nil}, the process becomes
associated with no buffer.
@end defun

@defun get-buffer-process buffer-or-name
This function returns a nondeleted process associated with the buffer
specified by @var{buffer-or-name}.  If there are several processes
associated with it, this function chooses one (currently, the one most
recently created, but don't count on that).  Deletion of a process
(see @code{delete-process}) makes it ineligible for this function to
return.

It is usually a bad idea to have more than one process associated with
the same buffer.

@smallexample
@group
(get-buffer-process "*shell*")
     @result{} #<process shell>
@end group
@end smallexample

Killing the process's buffer deletes the process, which kills the
subprocess with a @code{SIGHUP} signal (@pxref{Signals to Processes}).
@end defun

@node Filter Functions
@subsection Process Filter Functions
@cindex filter function
@cindex process filter

  A process @dfn{filter function} is a function that receives the
standard output from the associated process.  If a process has a filter,
then @emph{all} output from that process is passed to the filter.  The
process buffer is used directly for output from the process only when
there is no filter.

  The filter function can only be called when Emacs is waiting for
something, because process output arrives only at such times.  Emacs
waits when reading terminal input, in @code{sit-for} and
@code{sleep-for} (@pxref{Waiting}), and in @code{accept-process-output}
(@pxref{Accepting Output}).

  A filter function must accept two arguments: the associated process
and a string, which is output just received from it.  The function is
then free to do whatever it chooses with the output.

  Quitting is normally inhibited within a filter function---otherwise,
the effect of typing @kbd{C-g} at command level or to quit a user
command would be unpredictable.  If you want to permit quitting inside
a filter function, bind @code{inhibit-quit} to @code{nil}.  In most
cases, the right way to do this is with the macro
@code{with-local-quit}.  @xref{Quitting}.

  If an error happens during execution of a filter function, it is
caught automatically, so that it doesn't stop the execution of whatever
program was running when the filter function was started.  However, if
@code{debug-on-error} is non-@code{nil}, the error-catching is turned
off.  This makes it possible to use the Lisp debugger to debug the
filter function.  @xref{Debugger}.

  Many filter functions sometimes or always insert the text in the
process's buffer, mimicking the actions of Emacs when there is no
filter.  Such filter functions need to use @code{set-buffer} in order to
be sure to insert in that buffer.  To avoid setting the current buffer
semipermanently, these filter functions must save and restore the
current buffer.  They should also update the process marker, and in some
cases update the value of point.  Here is how to do these things:

@smallexample
@group
(defun ordinary-insertion-filter (proc string)
  (with-current-buffer (process-buffer proc)
    (let ((moving (= (point) (process-mark proc))))
@end group
@group
      (save-excursion
        ;; @r{Insert the text, advancing the process marker.}
        (goto-char (process-mark proc))
        (insert string)
        (set-marker (process-mark proc) (point)))
      (if moving (goto-char (process-mark proc))))))
@end group
@end smallexample

@noindent
The reason to use @code{with-current-buffer}, rather than using
@code{save-excursion} to save and restore the current buffer, is so as
to preserve the change in point made by the second call to
@code{goto-char}.

  To make the filter force the process buffer to be visible whenever new
text arrives, insert the following line just before the
@code{with-current-buffer} construct:

@smallexample
(display-buffer (process-buffer proc))
@end smallexample

  To force point to the end of the new output, no matter where it was
previously, eliminate the variable @code{moving} and call
@code{goto-char} unconditionally.

  In earlier Emacs versions, every filter function that did regular
expression searching or matching had to explicitly save and restore the
match data.  Now Emacs does this automatically for filter functions;
they never need to do it explicitly.  @xref{Match Data}.

  A filter function that writes the output into the buffer of the
process should check whether the buffer is still alive.  If it tries to
insert into a dead buffer, it will get an error.  The expression
@code{(buffer-name (process-buffer @var{process}))} returns @code{nil}
if the buffer is dead.

  The output to the function may come in chunks of any size.  A program
that produces the same output twice in a row may send it as one batch of
200 characters one time, and five batches of 40 characters the next.  If
the filter looks for certain text strings in the subprocess output, make
sure to handle the case where one of these strings is split across two
1306 1307
or more batches of output; one way to do this is to insert the
received text into a temporary buffer, which can then be searched.
Glenn Morris's avatar
Glenn Morris committed
1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389

@defun set-process-filter process filter
This function gives @var{process} the filter function @var{filter}.  If
@var{filter} is @code{nil}, it gives the process no filter.
@end defun

@defun process-filter process
This function returns the filter function of @var{process}, or @code{nil}
if it has none.
@end defun

  Here is an example of use of a filter function:

@smallexample
@group
(defun keep-output (process output)
   (setq kept (cons output kept)))
     @result{} keep-output
@end group
@group
(setq kept nil)
     @result{} nil
@end group
@group
(set-process-filter (get-process "shell") 'keep-output)
     @result{} keep-output
@end group
@group
(process-send-string "shell" "ls ~/other\n")
     @result{} nil
kept
     @result{} ("lewis@@slug[8] % "
@end group
@group
"FINAL-W87-SHORT.MSS    backup.otl              kolstad.mss~
address.txt             backup.psf              kolstad.psf
backup.bib~             david.mss               resume-Dec-86.mss~
backup.err              david.psf               resume-Dec.psf
backup.mss              dland                   syllabus.mss
"
"#backups.mss#          backup.mss~             kolstad.mss
")
@end group
@end smallexample

@ignore   @c The code in this example doesn't show the right way to do things.
Here is another, more realistic example, which demonstrates how to use
the process mark to do insertion in the same fashion as is done when
there is no filter function:

@smallexample
@group
;; @r{Insert input in the buffer specified by @code{my-shell-buffer}}
;;   @r{and make sure that buffer is shown in some window.}
(defun my-process-filter (proc str)
  (let ((cur (selected-window))
        (pop-up-windows t))
    (pop-to-buffer my-shell-buffer)
@end group
@group
    (goto-char (point-max))
    (insert str)
    (set-marker (process-mark proc) (point-max))
    (select-window cur)))
@end group
@end smallexample
@end ignore

@node Decoding Output
@subsection Decoding Process Output
@cindex decode process output

  When Emacs writes process output directly into a multibyte buffer,
it decodes the output according to the process output coding system.
If the coding system is @code{raw-text} or @code{no-conversion}, Emacs
converts the unibyte output to multibyte using
@code{string-to-multibyte}, and inserts the resulting multibyte text.

  You can use @code{set-process-coding-system} to specify which coding
system to use (@pxref{Process Information}).  Otherwise, the coding
system comes from @code{coding-system-for-read}, if that is
non-@code{nil}; or else from the defaulting mechanism (@pxref{Default
1390 1391 1392 1393
Coding Systems}).  If the text output by a process contains null
bytes, Emacs by default uses @code{no-conversion} for it; see
@ref{Lisp and Coding Systems, inhibit-null-byte-detection}, for how to
control this behavior.
Glenn Morris's avatar
Glenn Morris committed
1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404

  @strong{Warning:} Coding systems such as @code{undecided} which
determine the coding system from the data do not work entirely
reliably with asynchronous subprocess output.  This is because Emacs
has to process asynchronous subprocess output in batches, as it
arrives.  Emacs must try to detect the proper coding system from one
batch at a time, and this does not always work.  Therefore, if at all
possible, specify a coding system that determines both the character
code conversion and the end of line conversion---that is, one like
@code{latin-1-unix}, rather than @code{undecided} or @code{latin-1}.

1405 1406
@c Let's keep the index entries that were there for
@c set-process-filter-multibyte and process-filter-multibyte-p,
Glenn Morris's avatar
Glenn Morris committed
1407 1408 1409 1410
@cindex filter multibyte flag, of process
@cindex process filter multibyte flag
  When Emacs calls a process filter function, it provides the process
output as a multibyte string or as a unibyte string according to the
1411 1412 1413 1414
process's filter coding system.  Emacs
decodes the output according to the process output coding system,
which usually produces a multibyte string, except for coding systems
such as @code{binary} and @code{raw-text}
Glenn Morris's avatar
Glenn Morris committed
1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623

@node Accepting Output
@subsection Accepting Output from Processes
@cindex accept input from processes

  Output from asynchronous subprocesses normally arrives only while
Emacs is waiting for some sort of external event, such as elapsed time
or terminal input.  Occasionally it is useful in a Lisp program to
explicitly permit output to arrive at a specific point, or even to wait
until output arrives from a process.

@defun accept-process-output &optional process seconds millisec just-this-one
This function allows Emacs to read pending output from processes.  The
output is inserted in the associated buffers or given to their filter
functions.  If @var{process} is non-@code{nil} then this function does
not return until some output has been received from @var{process}.

@c Emacs 19 feature
The arguments @var{seconds} and @var{millisec} let you specify timeout
periods.  The former specifies a period measured in seconds and the
latter specifies one measured in milliseconds.  The two time periods
thus specified are added together, and @code{accept-process-output}
returns after that much time, whether or not there has been any
subprocess output.

The argument @var{millisec} is semi-obsolete nowadays because
@var{seconds} can be a floating point number to specify waiting a
fractional number of seconds.  If @var{seconds} is 0, the function
accepts whatever output is pending but does not wait.

@c Emacs 22.1 feature
If @var{process} is a process, and the argument @var{just-this-one} is
non-@code{nil}, only output from that process is handled, suspending output
from other processes until some output has been received from that
process or the timeout expires.  If @var{just-this-one} is an integer,
also inhibit running timers.  This feature is generally not
recommended, but may be necessary for specific applications, such as
speech synthesis.

The function @code{accept-process-output} returns non-@code{nil} if it
did get some output, or @code{nil} if the timeout expired before output
arrived.
@end defun

@node Sentinels
@section Sentinels: Detecting Process Status Changes
@cindex process sentinel
@cindex sentinel (of process)

  A @dfn{process sentinel} is a function that is called whenever the
associated process changes status for any reason, including signals
(whether sent by Emacs or caused by the process's own actions) that
terminate, stop, or continue the process.  The process sentinel is
also called if the process exits.  The sentinel receives two
arguments: the process for which the event occurred, and a string
describing the type of event.

  The string describing the event looks like one of the following:

@itemize @bullet
@item
@code{"finished\n"}.

@item
@code{"exited abnormally with code @var{exitcode}\n"}.

@item
@code{"@var{name-of-signal}\n"}.

@item
@code{"@var{name-of-signal} (core dumped)\n"}.
@end itemize

  A sentinel runs only while Emacs is waiting (e.g., for terminal
input, or for time to elapse, or for process output).  This avoids the
timing errors that could result from running them at random places in
the middle of other Lisp programs.  A program can wait, so that
sentinels will run, by calling @code{sit-for} or @code{sleep-for}
(@pxref{Waiting}), or @code{accept-process-output} (@pxref{Accepting
Output}).  Emacs also allows sentinels to run when the command loop is
reading input.  @code{delete-process} calls the sentinel when it
terminates a running process.

  Emacs does not keep a queue of multiple reasons to call the sentinel
of one process; it records just the current status and the fact that
there has been a change.  Therefore two changes in status, coming in
quick succession, can call the sentinel just once.  However, process
termination will always run the sentinel exactly once.  This is
because the process status can't change again after termination.

  Emacs explicitly checks for output from the process before running
the process sentinel.  Once the sentinel runs due to process
termination, no further output can arrive from the process.

  A sentinel that writes the output into the buffer of the process
should check whether the buffer is still alive.  If it tries to insert
into a dead buffer, it will get an error.  If the buffer is dead,
@code{(buffer-name (process-buffer @var{process}))} returns @code{nil}.

  Quitting is normally inhibited within a sentinel---otherwise, the
effect of typing @kbd{C-g} at command level or to quit a user command
would be unpredictable.  If you want to permit quitting inside a
sentinel, bind @code{inhibit-quit} to @code{nil}.  In most cases, the
right way to do this is with the macro @code{with-local-quit}.
@xref{Quitting}.

  If an error happens during execution of a sentinel, it is caught
automatically, so that it doesn't stop the execution of whatever
programs was running when the sentinel was started.  However, if
@code{debug-on-error} is non-@code{nil}, the error-catching is turned
off.  This makes it possible to use the Lisp debugger to debug the
sentinel.  @xref{Debugger}.

  While a sentinel is running, the process sentinel is temporarily
set to @code{nil} so that the sentinel won't run recursively.
For this reason it is not possible for a sentinel to specify
a new sentinel.

  In earlier Emacs versions, every sentinel that did regular expression
searching or matching had to explicitly save and restore the match data.
Now Emacs does this automatically for sentinels; they never need to do
it explicitly.  @xref{Match Data}.

@defun set-process-sentinel process sentinel
This function associates @var{sentinel} with @var{process}.  If
@var{sentinel} is @code{nil}, then the process will have no sentinel.
The default behavior when there is no sentinel is to insert a message in
the process's buffer when the process status changes.

Changes in process sentinel take effect immediately---if the sentinel
is slated to be run but has not been called yet, and you specify a new
sentinel, the eventual call to the sentinel will use the new one.

@smallexample
@group
(defun msg-me (process event)
   (princ
     (format "Process: %s had the event `%s'" process event)))
(set-process-sentinel (get-process "shell") 'msg-me)
     @result{} msg-me
@end group
@group
(kill-process (get-process "shell"))
     @print{} Process: #<process shell> had the event `killed'
     @result{} #<process shell>
@end group
@end smallexample
@end defun

@defun process-sentinel process
This function returns the sentinel of @var{process}, or @code{nil} if it
has none.
@end defun

@defun waiting-for-user-input-p
While a sentinel or filter function is running, this function returns
non-@code{nil} if Emacs was waiting for keyboard input from the user at
the time the sentinel or filter function was called, @code{nil} if it
was not.
@end defun

@node Query Before Exit
@section Querying Before Exit

  When Emacs exits, it terminates all its subprocesses by sending them
the @code{SIGHUP} signal.  Because subprocesses may be doing
valuable work, Emacs normally asks the user to confirm that it is ok
to terminate them.  Each process has a query flag which, if
non-@code{nil}, says that Emacs should ask for confirmation before
exiting and thus killing that process.  The default for the query flag
is @code{t}, meaning @emph{do} query.

@defun process-query-on-exit-flag process
This returns the query flag of @var{process}.
@end defun

@defun set-process-query-on-exit-flag process flag
This function sets the query flag of @var{process} to @var{flag}.  It
returns @var{flag}.

@smallexample
@group
;; @r{Don't query about the shell process}
(set-process-query-on-exit-flag (get-process "shell") nil)
     @result{} t
@end group
@end smallexample
@end defun

@defun process-kill-without-query process &optional do-query
This function clears the query flag of @var{process}, so that
Emacs will not query the user on account of that process.

Actually, the function does more than that: it returns the old value of
the process's query flag, and sets the query flag to @var{do-query}.
Please don't use this function to do those things any more---please
use the newer, cleaner functions @code{process-query-on-exit-flag} and
@code{set-process-query-on-exit-flag} in all but the simplest cases.
The only way you should use @code{process-kill-without-query} nowadays
is like this:

@smallexample
@group
;; @r{Don't query about the shell process}
(process-kill-without-query (get-process "shell"))
@end group
@end smallexample
@end defun

1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645
@node System Processes
@section Accessing Other Processes
@cindex system processes

  In addition to accessing and manipulating processes that are
subprocesses of the current Emacs session, Emacs Lisp programs can
also access other processes running on the same machine.  We call
these @dfn{system processes}, to distinguish between them and Emacs
subprocesses.

  Emacs provides several primitives for accessing system processes.
Not all platforms support these primitives; on those which don't,
these primitives return @code{nil}.

@defun list-system-processes
This function returns a list of all the processes running on the
system.  Each process is identified by its @acronym{PID}, a numerical
process ID that is assigned by the OS and distinguishes the process
from all the other processes running on the same machine at the same
time.
@end defun

1646
@defun process-attributes pid
1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686
This function returns an alist of attributes for the process specified
by its process ID @var{pid}.  Each association in the alist is of the
form @code{(@var{key} . @var{value})}, where @var{key} designates the
attribute and @var{value} is the value of that attribute.  The various
attribute @var{key}'s that this function can return are listed below.
Not all platforms support all of these attributes; if an attribute is
not supported, its association will not appear in the returned alist.
Values that are numbers can be either integer or floating-point,
depending on the magnitude of the value.

@table @code
@item euid
The effective user ID of the user who invoked the process.  The
corresponding @var{value} is a number.  If the process was invoked by
the same user who runs the current Emacs session, the value is
identical to what @code{user-uid} returns (@pxref{User
Identification}).

@item user
User name corresponding to the process's effective user ID, a string.

@item egid
The group ID of the effective user ID, a number.

@item group
Group name corresponding to the effective user's group ID, a string.

@item comm
The name of the command that runs in the process.  This is a string
that usually specifies the name of the executable file of the process,
without the leading directories.  However, some special system
processes can report strings that do not correspond to an executable
file of a program.

@item state
The state code of the process.  This is a short string that encodes
the scheduling state of the process.  Here's a list of the most
frequently seen codes:

@table @code
1687
@item "D"
1688
uninterruptible sleep (usually I/O)
1689
@item "R"
1690
running
1691
@item "S"
1692
interruptible sleep (waiting for some event)
1693
@item "T"
1694
stopped, e.g., by a job control signal
1695 1696
@item "Z"
``zombie'': a process that terminated, but was not reaped by its parent
1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748
@end table

@noindent
For the full list of the possible states, see the manual page of the
@command{ps} command.

@item ppid
The process ID of the parent process, a number.

@item pgrp
The process group ID of the process, a number.

@item sess
The session ID of the process.  This is a number that is the process
ID of the process's @dfn{session leader}.

@item ttname
A string that is the name of the process's controlling terminal.  On
Unix and GNU systems, this is normally the file name of the
corresponding terminal device, such as @file{/dev/pts65}.

@item tpgid
The numerical process group ID of the foreground process group that
uses the process's terminal.

@item minflt
The number of minor page faults caused by the process since its
beginning.  (Minor page faults are those that don't involve reading
from disk.)

@item majflt
The number of major page faults caused by the process since its
beginning.  (Major page faults require a disk to be read, and are thus
more expensive than minor page faults.)

@item cminflt
@itemx cmajflt
Like @code{minflt} and @code{majflt}, but include the number of page
faults for all the child processes of the given process.

@item utime
Time spent by the process in the user context, for running the
application's code.  The corresponding @var{value} is in the
@w{@code{(@var{high} @var{low} @var{microsec})}} format, the same
format used by functions @code{current-time} (@pxref{Time of Day,
current-time}) and @code{file-attributes} (@pxref{File Attributes}).

@item stime
Time spent by the process in the system (kernel) context, for
processing system calls.  The corresponding @var{value} is in the same
format as for @code{utime}.

1749 1750 1751 1752
@item time
The sum of @code{utime} and @code{stime}.  The corresponding
@var{value} is in the same format as for @code{utime}.

1753 1754
@item cutime
@itemx cstime
1755 1756 1757
@itemx ctime
Like @code{utime}, @code{stime}, and @code{time}, but include the
times of all the child processes of the given process.
1758 1759 1760 1761 1762

@item pri
The numerical priority of the process.

@item nice
1763 1764
The @dfn{nice value} of the process, a number.  (Processes with smaller
nice values get scheduled more favorably.)
1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807

@item thcount
The number of threads in the process.

@item start
The time the process was started, in the @w{@code{(@var{high}
@var{low} @var{microsec})}} format used by @code{current-time} and
@code{file-attributes}.

@item etime
The time elapsed since the process started, in the @w{@code{(@var{high}
@var{low} @var{microsec})}} format.

@item vsize
The virtual memory size of the process, measured in kilobytes.

@item rss
The size of the process's @dfn{resident set}, the number of kilobytes
occupied by the process in the machine's physical memory.

@item pcpu
The percentage of the CPU time used by the process since it started.
The corresponding @var{value} is a floating-point number between 0 and
100.

@item pmem
The percentage of the total physical memory installed on the machine
used by the process's resident set.  The value is a floating-point
number between 0 and 100.

@item args
The command-line with which the process was invoked.  This is a string
in which individual command-line arguments are separated by blanks;
whitespace characters that are embedded in the arguments are quoted as
appropriate for the system's shell: escaped by backslash characters on
GNU and Unix, and enclosed in double quote characters on Windows.
Thus, this command-line string can be directly used in primitives such
as @code{shell-command}.
@end table

@end defun


Glenn Morris's avatar
Glenn Morris committed
1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837
@node Transaction Queues
@section Transaction Queues
@cindex transaction queue

You can use a @dfn{transaction queue} to communicate with a subprocess
using transactions.  First use @code{tq-create} to create a transaction
queue communicating with a specified process.  Then you can call
@code{tq-enqueue} to send a transaction.

@defun tq-create process
This function creates and returns a transaction queue communicating with
@var{process}.  The argument @var{process} should be a subprocess
capable of sending and receiving streams of bytes.  It may be a child
process, or it may be a TCP connection to a server, possibly on another
machine.
@end defun

@defun tq-enqueue queue question regexp closure fn &optional delay-question
This function sends a transaction to queue @var{queue}.  Specifying the
queue has the effect of specifying the subprocess to talk to.

The argument @var{question} is the outgoing message that starts the
transaction.  The argument @var{fn} is the function to call when the
corresponding answer comes back; it is called with two arguments:
@var{closure}, and the answer received.

The argument @var{regexp} is a regular expression that should match
text at the end of the entire answer, but nothing before; that's how
@code{tq-enqueue} determines where the answer ends.

Chong Yidong's avatar
Chong Yidong committed
1838 1839
If the argument @var{delay-question} is non-@code{nil}, delay sending
this question until the process has finished replying to any previous
Glenn Morris's avatar
Glenn Morris committed
1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884
questions.  This produces more reliable results with some processes.

The return value of @code{tq-enqueue} itself is not meaningful.
@end defun

@defun tq-close queue
Shut down transaction queue @var{queue}, waiting for all pending transactions
to complete, and then terminate the connection or child process.
@end defun

Transaction queues are implemented by means of a filter function.
@xref{Filter Functions}.

@node Network
@section Network Connections
@cindex network connection
@cindex TCP
@cindex UDP

  Emacs Lisp programs can open stream (TCP) and datagram (UDP) network
connections to other processes on the same machine or other machines.
A network connection is handled by Lisp much like a subprocess, and is
represented by a process object.  However, the process you are
communicating with is not a child of the Emacs process, so it has no
process @acronym{ID}, and you can't kill it or send it signals.  All you
can do is send and receive data.  @code{delete-process} closes the
connection, but does not kill the program at the other end; that
program must decide what to do about closure of the connection.

  Lisp programs can listen for connections by creating network
servers.  A network server is also represented by a kind of process
object, but unlike a network connection, the network server never
transfers data itself.  When it receives a connection request, it
creates a new network connection to represent the connection just
made.  (The network connection inherits certain information, including
the process plist, from the server.)  The network server then goes
back to listening for more connection requests.

  Network connections and servers are created by calling
@code{make-network-process} with an argument list consisting of
keyword/argument pairs, for example @code{:server t} to create a
server process, or @code{:type 'datagram} to create a datagram
connection.  @xref{Low-Level Network}, for details.  You can also use
the @code{open-network-stream} function described below.

1885 1886 1887 1888 1889 1890 1891 1892
  To distinguish the different types of processes, the
@code{process-type} function returns the symbol @code{network} for a
network connection or server, @code{serial} for a serial port
connection, or @code{real} for a real subprocess.

  The @code{process-status} function returns @code{open},
@code{closed}, @code{connect}, and @code{failed} for network
connections.  For a network server, the status is always
Glenn Morris's avatar
Glenn Morris committed
1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240
@code{listen}.  None of those values is possible for a real
subprocess.  @xref{Process Information}.

  You can stop and resume operation of a network process by calling
@code{stop-process} and @code{continue-process}.  For a server
process, being stopped means not accepting new connections.  (Up to 5
connection requests will be queued for when you resume the server; you
can increase this limit, unless it is imposed by the operating
system.)  For a network stream connection, being stopped means not
processing input (any arriving input waits until you resume the
connection).  For a datagram connection, some number of packets may be
queued but input may be lost.  You can use the function
@code{process-command} to determine whether a network connection or
server is stopped; a non-@code{nil} value means yes.

@defun open-network-stream name buffer-or-name host service
This function opens a TCP connection, and returns a process object
that represents the connection.

The @var{name} argument specifies the name for the process object.  It
is modified as necessary to make it unique.

The @var{buffer-or-name} argument is the buffer to associate with the
connection.  Output from the connection is inserted in the buffer,
unless you specify a filter function to handle the output.  If
@var{buffer-or-name} is @code{nil}, it means that the connection is not
associated with any buffer.

The arguments @var{host} and @var{service} specify where to connect to;
@var{host} is the host name (a string), and @var{service} is the name of
a defined network service (a string) or a port number (an integer).
@end defun

@node Network Servers
@section Network Servers
@cindex network servers

  You create a server by calling @code{make-network-process} with
@code{:server t}.  The server will listen for connection requests from
clients.  When it accepts a client connection request, that creates a
new network connection, itself a process object, with the following
parameters:

@itemize @bullet
@item
The connection's process name is constructed by concatenating the
server process' @var{name} with a client identification string.  The
client identification string for an IPv4 connection looks like
@samp{<@var{a}.@var{b}.@var{c}.@var{d}:@var{p}>}.  Otherwise, it is a
unique number in brackets, as in @samp{<@var{nnn}>}.  The number
is unique for each connection in the Emacs session.

@item
If the server's filter is non-@code{nil}, the connection process does
not get a separate process buffer; otherwise, Emacs creates a new
buffer for the purpose.  The buffer name is the server's buffer name
or process name, concatenated with the client identification string.

The server's process buffer value is never used directly by Emacs, but
it is passed to the log function, which can log connections by
inserting text there.

@item
The communication type and the process filter and sentinel are
inherited from those of the server.  The server never directly
uses its filter and sentinel; their sole purpose is to initialize
connections made to the server.

@item
The connection's process contact info is set according to the client's
addressing information (typically an IP address and a port number).
This information is associated with the @code{process-contact}
keywords @code{:host}, @code{:service}, @code{:remote}.

@item
The connection's local address is set up according to the port
number used for the connection.

@item
The client process' plist is initialized from the server's plist.
@end itemize

@node Datagrams
@section Datagrams
@cindex datagrams

  A datagram connection communicates with individual packets rather
than streams of data.  Each call to @code{process-send} sends one
datagram packet (@pxref{Input to Processes}), and each datagram
received results in one call to the filter function.

  The datagram connection doesn't have to talk with the same remote
peer all the time.  It has a @dfn{remote peer address} which specifies
where to send datagrams to.  Each time an incoming datagram is passed
to the filter function, the peer address is set to the address that
datagram came from; that way, if the filter function sends a datagram,
it will go back to that place.  You can specify the remote peer
address when you create the datagram connection using the
@code{:remote} keyword.  You can change it later on by calling
@code{set-process-datagram-address}.

@defun process-datagram-address process
If @var{process} is a datagram connection or server, this function
returns its remote peer address.
@end defun

@defun set-process-datagram-address process address
If @var{process} is a datagram connection or server, this function
sets its remote peer address to @var{address}.
@end defun

@node Low-Level Network
@section Low-Level Network Access

  You can also create network connections by operating at a lower
level than that of @code{open-network-stream}, using
@code{make-network-process}.

@menu
* Proc: Network Processes.   Using @code{make-network-process}.
* Options: Network Options.  Further control over network connections.
* Features: Network Feature Testing.
                             Determining which network features work on
                               the machine you are using.
@end menu

@node Network Processes
@subsection @code{make-network-process}

   The basic function for creating network connections and network
servers is @code{make-network-process}.  It can do either of those
jobs, depending on the arguments you give it.

@defun make-network-process &rest args
This function creates a network connection or server and returns the
process object that represents it.  The arguments @var{args} are a
list of keyword/argument pairs.  Omitting a keyword is always
equivalent to specifying it with value @code{nil}, except for
@code{:coding}, @code{:filter-multibyte}, and @code{:reuseaddr}.  Here
are the meaningful keywords:

@table @asis
@item :name @var{name}
Use the string @var{name} as the process name.  It is modified if
necessary to make it unique.

@item :type @var{type}
Specify the communication type.  A value of @code{nil} specifies a
stream connection (the default); @code{datagram} specifies a datagram
connection.  Both connections and servers can be of either type.

@item :server @var{server-flag}
If @var{server-flag} is non-@code{nil}, create a server.  Otherwise,
create a connection.  For a stream type server, @var{server-flag} may
be an integer which then specifies the length of the queue of pending
connections to the server.  The default queue length is 5.

@item :host @var{host}
Specify the host to connect to.  @var{host} should be a host name or
Internet address, as a string, or the symbol @code{local} to specify
the local host.  If you specify @var{host} for a server, it must
specify a valid address for the local host, and only clients
connecting to that address will be accepted.

@item :service @var{service}
@var{service} specifies a port number to connect to, or, for a server,
the port number to listen on.  It should be a service name that
translates to a port number, or an integer specifying the port number
directly.  For a server, it can also be @code{t}, which means to let
the system select an unused port number.

@item :family @var{family}
@var{family} specifies the address (and protocol) family for
communication.  @code{nil} means determine the proper address family
automatically for the given @var{host} and @var{service}.
@code{local} specifies a Unix socket, in which case @var{host} is
ignored.  @code{ipv4} and @code{ipv6} specify to use IPv4 and IPv6
respectively.

@item :local @var{local-address}
For a server process, @var{local-address} is the address to listen on.
It overrides @var{family}, @var{host} and @var{service}, and you
may as well not specify them.

@item :remote @var{remote-address}
For a connection, @var{remote-address} is the address to connect to.
It overrides @var{family}, @var{host} and @var{service}, and you
may as well not specify them.

For a datagram server, @var{remote-address} specifies the initial
setting of the remote datagram address.

The format of @var{local-address} or @var{remote-address} depends on
the address family:

@itemize -
@item
An IPv4 address is represented as a five-element vector of four 8-bit
integers and one 16-bit integer
@code{[@var{a} @var{b} @var{c} @var{d} @var{p}]} corresponding to
numeric IPv4 address @var{a}.@var{b}.@var{c}.@var{d} and port number
@var{p}.

@item
An IPv6 address is represented as a nine-element vector of 16-bit
integers @code{[@var{a} @var{b} @var{c} @var{d} @var{e} @var{f}
@var{g} @var{h} @var{p}]} corresponding to numeric IPv6 address
@var{a}:@var{b}:@var{c}:@var{d}:@var{e}:@var{f}:@var{g}:@var{h} and
port number @var{p}.

@item
A local address is represented as a string which specifies the address
in the local address space.

@item
An ``unsupported family'' address is represented by a cons
@code{(@var{f} . @var{av})}, where @var{f} is the family number and
@var{av} is a vector specifying the socket address using one element
per address data byte.  Do not rely on this format in portable code,
as it may depend on implementation defined constants, data sizes, and
data structure alignment.
@end itemize

@item :nowait @var{bool}
If @var{bool} is non-@code{nil} for a stream connection, return
without waiting for the connection to complete.  When the connection
succeeds or fails, Emacs will call the sentinel function, with a
second argument matching @code{"open"} (if successful) or
@code{"failed"}.  The default is to block, so that
@code{make-network-process} does not return until the connection
has succeeded or failed.

@item :stop @var{stopped}
Start the network connection or server in the `stopped' state if
@var{stopped} is non-@code{nil}.

@item :buffer @var{buffer}
Use @var{buffer} as the process buffer.

@item :coding @var{coding}
Use @var{coding} as the coding system for this process.  To specify
different coding systems for decoding data from the connection and for
encoding data sent to it, specify @code{(@var{decoding} .
@var{encoding})} for @var{coding}.

If you don't specify this keyword at all, the default
is to determine the coding systems from the data.

@item :noquery @var{query-flag}
Initialize the process query flag to @var{query-flag}.
@xref{Query Before Exit}.

@item :filter @var{filter}
Initialize the process filter to @var{filter}.

@item :filter-multibyte @var{bool}
If @var{bool} is non-@code{nil}, strings given to the process filter
are multibyte, otherwise they are unibyte.  If you don't specify this
keyword at all, the default is that the strings are multibyte if
@code{default-enable-multibyte-characters} is non-@code{nil}.

@item :sentinel @var{sentinel}
Initialize the process sentinel to @var{sentinel}.

@item :log @var{log}
Initialize the log function of a server process to @var{log}.  The log
function is called each time the server accepts a network connection
from a client.  The arguments passed to the log function are
@var{server}, @var{connection}, and @var{message}, where @var{server}
is the server process, @var{connection} is the new process for the
connection, and @var{message} is a string describing what has
happened.

@item :plist @var{plist}
Initialize the process plist to @var{plist}.
@end table

The original argument list, modified with the actual connection
information, is available via the @code{process-contact} function.
@end defun

@node Network Options
@subsection Network Options

  The following network options can be specified when you create a
network process.  Except for @code{:reuseaddr}, you can also set or
modify these options later, using @code{set-network-process-option}.

  For a server process, the options specified with
@code{make-network-process} are not inherited by the client
connections, so you will need to set the necessary options for each
child connection as it is created.

@table @asis
@item :bindtodevice @var{device-name}
If @var{device-name} is a non-empty string identifying a network
interface name (see @code{network-interface-list}), only handle
packets received on that interface.  If @var{device-name} is @code{nil}
(the default), handle packets received on any interface.

Using this option may require special privileges on some systems.

@item :broadcast @var{broadcast-flag}
If @var{broadcast-flag} is non-@code{nil} for a datagram process, the
process will receive datagram packet sent to a broadcast address, and
be able to send packets to a broadcast address.  Ignored for a stream
connection.

@item :dontroute @var{dontroute-flag}
If @var{dontroute-flag} is non-@code{nil}, the process can only send
to hosts on the same network as the local host.

@item :keepalive @var{keepalive-flag}
If @var{keepalive-flag} is non-@code{nil} for a stream connection,
enable exchange of low-level keep-alive messages.

@item :linger @var{linger-arg}
If @var{linger-arg} is non-@code{nil}, wait for successful
transmission of all queued packets on the connection before it is
deleted (see @code{delete-process}).  If @var{linger-arg} is an
integer, it specifies the maximum time in seconds to wait for queued
packets to be sent before closing the connection.  Default is
@code{nil} which means to discard unsent queued packets when the
process is deleted.

@item :oobinline @var{oobinline-flag}
If @var{oobinline-flag} is non-@code{nil} for a stream connection,
receive out-of-band data in the normal data stream.  Otherwise, ignore
out-of-band data.

@item :priority @var{priority}
Set the priority for packets sent on this connection to the integer
@var{priority}.  The interpretation of this number is protocol
specific, such as setting the TOS (type of service) field on IP
packets sent on this connection.  It may also have system dependent
effects, such as selecting a specific output queue on the network
interface.

@item :reuseaddr @var{reuseaddr-flag}
If @var{reuseaddr-flag} is non-@code{nil} (the default) for a stream
server process, allow this server to reuse a specific port number (see
@code{:service}) unless another process on this host is already
listening on that port.  If @var{reuseaddr-flag} is @code{nil}, there
may be a period of time after the last use of that port (by any
process on the host), where it is not possible to make a new server on
that port.
@end table

2241
@defun set-network-process-option process option value &optional no-error
Glenn Morris's avatar
Glenn Morris committed
2242 2243
This function sets or modifies a network option for network process
@var{process}.  See @code{make-network-process} for details of options
2244 2245 2246 2247
@var{option} and their corresponding values @var{value}.  If
@var{no-error} is non-@code{nil}, this function returns @code{nil}
instead of signaling an error if @var{option} is not a supported
option.  If the function successfully completes, it returns @code{t}.
Glenn Morris's avatar
Glenn Morris committed
2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310

The current setting of an option is available via the
@code{process-contact} function.
@end defun

@node Network Feature Testing
@subsection Testing Availability of Network Features

  To test for the availability of a given network feature, use
@code{featurep} like this:

@example
(featurep 'make-network-process '(@var{keyword} @var{value}))
@end example

@noindent
The result of the first form is @code{t} if it works to specify
@var{keyword} with value @var{value} in @code{make-network-process}.
The result of the second form is @code{t} if @var{keyword} is
supported by @code{make-network-process}.  Here are some of the
@var{keyword}---@var{value} pairs you can test in
this way.

@table @code
@item (:nowait t)
Non-@code{nil} if non-blocking connect is supported.
@item (:type datagram)
Non-@code{nil} if datagrams are supported.
@item (:family local)
Non-@code{nil} if local (a.k.a.@: ``UNIX domain'') sockets are supported.
@item (:family ipv6)
Non-@code{nil} if IPv6 is supported.
@item (:service t)
Non-@code{nil} if the system can select the port for a server.
@end table

  To test for the availability of a given network option, use
@code{featurep} like this:

@example
(featurep 'make-network-process '@var{keyword})
@end example

@noindent
Here are some of the options you can test in this way.

@table @code
@item :bindtodevice
@itemx :broadcast
@itemx :dontroute
@itemx :keepalive
@itemx :linger
@itemx :oobinline
@itemx :priority
@itemx :reuseaddr
That particular network option is supported by
@code{make-network-process} and @code{set-network-process-option}.
@end table

@node Misc Network
@section Misc Network Facilities

  These additional functions are useful for creating and operating
2311 2312
on network connections.  Note that they are supported only on some
systems.
Glenn Morris's avatar
Glenn Morris committed
2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360

@defun network-interface-list
This function returns a list describing the network interfaces
of the machine you are using.  The value is an alist whose
elements have the form @code{(@var{name} . @var{address})}.
@var{address} has the same form as the @var{local-address}
and @var{remote-address} arguments to @code{make-network-process}.
@end defun

@defun network-interface-info ifname
This function returns information about the network interface named
@var{ifname}.  The value is a list of the form
@code{(@var{addr} @var{bcast} @var{netmask} @var{hwaddr} @var{flags})}.

@table @var
@item addr
The Internet protocol address.
@item bcast
The broadcast address.
@item netmask
The network mask.
@item hwaddr
The layer 2 address (Ethernet MAC address, for instance).
@item flags
The current flags of the interface.
@end table
@end defun

@defun format-network-address address &optional omit-port
This function converts the Lisp representation of a network address to
a string.

A five-element vector @code{[@var{a} @var{b} @var{c} @var{d} @var{p}]}
represents an IPv4 address @var{a}.@var{b}.@var{c}.@var{d} and port
number @var{p}.  @code{format-network-address} converts that to the
string @code{"@var{a}.@var{b}.@var{c}.@var{d}:@var{p}"}.

A nine-element vector @code{[@var{a} @var{b} @var{c} @var{d} @var{e}
@var{f} @var{g} @var{h} @var{p}]} represents an IPv6 address along
with a port number.  @code{format-network-address} converts that to
the string
@code{"[@var{a}:@var{b}:@var{c}:@var{d}:@var{e}:@var{f}:@var{g}:@var{h}]:@var{p}"}.

If the vector does not include the port number, @var{p}, or if
@var{omit-port} is non-@code{nil}, the result does not include the
@code{:@var{p}} suffix.
@end defun

2361 2362 2363 2364
@node Serial Ports
@section Communicating with Serial Ports
@cindex @file{/dev/tty}
@cindex @file{COM1}
Eli Zaretskii's avatar
Eli Zaretskii committed
2365
@cindex serial connections
2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379

  Emacs can communicate with serial ports.  For interactive use,
@kbd{M-x serial-term} opens a terminal window.  In a Lisp program,
@code{make-serial-process} creates a process object.

  The serial port can be configured at run-time, without having to
close and re-open it.  The function @code{serial-process-configure}
lets you change the speed, bytesize, and other parameters.  In a
terminal window created by @code{serial-term}, you can click on the
mode line for configuration.

  A serial connection is represented by a process object which can be
used similar to a subprocess or network process.  You can send and
receive data and configure the serial port.  A serial process object
2380 2381
has no process ID, you can't send signals to it, and the status codes
are different from other types of processes.
2382 2383 2384 2385 2386
@code{delete-process} on the process object or @code{kill-buffer} on
the process buffer close the connection, but this does not affect the
device connected to the serial port.

  The function @code{process-type} returns the symbol @code{serial}
2387
for a process object representing a serial port connection.
2388 2389 2390

  Serial ports are available on GNU/Linux, Unix, and Windows systems.

2391
@deffn Command serial-term port speed
2392
Start a terminal-emulator for a serial port in a new buffer.
2393 2394 2395 2396
@var{port} is the name of the serial port to which to connect.  For
example, this could be @file{/dev/ttyS0} on Unix.  On Windows, this
could be @file{COM1}, or @file{\\.\COM10} (double the backslashes in
Lisp strings).
2397 2398

@var{speed} is the speed of the serial port in bits per second.  9600
2399 2400 2401 2402
is a common value.  The buffer is in Term mode; see @ref{Term Mode,,,
emacs, The GNU Emacs Manual}, for the commands to use in that buffer.
You can change the speed and the configuration in the mode line menu.
@end deffn
2403 2404

@defun make-serial-process &rest args
2405 2406
This function creates a process and a buffer.  Arguments are specified
as keyword/argument pairs.  Here's the list of the meaningful keywords:
2407 2408

@table @code
2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431
@item :port @var{port}@r{ (mandatory)}
This is the name of the serial port.  On Unix and GNU systems, this is
a file name such as @file{/dev/ttyS0}.  On Windows, this could be
@file{COM1}, or @file{\\.\COM10} for ports higher than @file{COM9}
(double the backslashes in Lisp strings).

@item :speed @var{speed}@r{ (mandatory)}
The speed of the serial port in bits per second.  This function calls
@code{serial-process-configure} to handle the speed.

@item :name @var{name}
The name of the process.  If @var{name} is not given, @var{port} will
serve as the process name as well.

@item :buffer @var{buffer}
The buffer to associate with the process.  The value could be either a
buffer or a string that names a buffer.  Process output goes at the
end of that buffer, unless you specify an output stream or filter
function to handle the output.  If @var{buffer} is not given, the
process buffer's name is taken from the value of the @code{:name}
keyword.

@item :coding @var{coding}
2432 2433 2434
If @var{coding} is a symbol, it specifies the coding system used for
both reading and writing for this process.  If @var{coding} is a cons
@code{(decoding . encoding)}, @var{decoding} is used for reading, and
2435 2436
@var{encoding} is used for writing.  If not specified, the default is
to determine the coding systems from data itself.
2437

2438 2439 2440
@item :noquery @var{query-flag}
Initialize the process query flag to @var{query-flag}.  @xref{Query
Before Exit}.  The flags defaults to @code{nil} if unspecified.
2441

2442
@item :stop @var{bool}
2443 2444 2445 2446 2447 2448
Start process in the @code{stopped} state if @var{bool} is
non-@code{nil}.  In the stopped state, a serial process does not
accept incoming data, but you can send outgoing data.  The stopped
state is cleared by @code{continue-process} and set by
@code{stop-process}.

2449
@item :filter @var{filter}
2450 2451
Install @var{filter} as the process filter.

2452
@item :sentinel @var{sentinel}
2453 2454
Install @var{sentinel} as the process sentinel.

2455
@item :plist @var{plist}
2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476
Install @var{plist} as the initial plist of the process.

@item :speed
@itemx :bytesize
@itemx :parity
@itemx :stopbits
@itemx :flowcontrol
These arguments are handled by @code{serial-process-configure}, which
is called by @code{make-serial-process}.
@end table

The original argument list, possibly modified by later configuration,
is available via the function @code{process-contact}.

Examples:

@example
(make-serial-process :port "/dev/ttyS0" :speed 9600)

(make-serial-process :port "COM1" :speed 115200 :stopbits 2)

2477 2478
(make-serial-process :port "\\\\.\\COM13" :speed 1200
                     :bytesize 7 :parity 'odd)
2479

2480 2481
(make-serial-process :port "/dev/tty.BlueConsole-SPP-1"
                     :speed nil)
2482 2483 2484 2485
@end example
@end defun

@defun serial-process-configure &rest args
2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496
@cindex baud, in serial connections
@cindex bytesize, in serial connections
@cindex parity, in serial connections
@cindex stopbits, in serial connections
@cindex flowcontrol, in serial connections

This functions configures a serial port connection.  Arguments are
specified as keyword/argument pairs.  Attributes that are not given
are re-initialized from the process's current configuration (available
via the function @code{process-contact}) or set to reasonable default
values.  The following arguments are defined:
2497 2498

@table @code
2499 2500 2501 2502
@item :process @var{process}
@itemx :name @var{name}
@itemx :buffer @var{buffer}
@itemx :port @var{port}