tramp-sh.el 199 KB
Newer Older
1 2
;;; tramp-sh.el --- Tramp access functions for (s)sh-like connections

3
;; Copyright (C) 1998-2013 Free Software Foundation, Inc.
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

;; (copyright statements below in code to be updated with the above notice)

;; Author: Kai Großjohann <kai.grossjohann@gmx.net>
;;         Michael Albinus <michael.albinus@gmx.de>
;; Keywords: comm, processes
;; Package: tramp

;; This file is part of GNU Emacs.

;; GNU Emacs is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation, either version 3 of the License, or
;; (at your option) any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.

;;; Code:

29
(eval-when-compile (require 'cl))	; ignore-errors
30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
(require 'tramp)

;; Pacify byte-compiler.  The function is needed on XEmacs only.  I'm
;; not sure at all that this is the right way to do it, but let's hope
;; it works for now, and wait for a guru to point out the Right Way to
;; achieve this.
;;(eval-when-compile
;;  (unless (fboundp 'dired-insert-set-properties)
;;    (fset 'dired-insert-set-properties 'ignore)))
;; Gerd suggests this:
(eval-when-compile (require 'dired))
;; Note that dired is required at run-time, too, when it is needed.
;; It is only needed on XEmacs for the function
;; `dired-insert-set-properties'.

(defcustom tramp-inline-compress-start-size 4096
46
  "The minimum size of compressing where inline transfer.
Paul Eggert's avatar
Paul Eggert committed
47
When inline transfer, compress transferred data of file
48 49 50 51 52 53
whose size is this value or above (up to `tramp-copy-size-limit').
If it is nil, no compression at all will be applied."
  :group 'tramp
  :type '(choice (const nil) integer))

(defcustom tramp-copy-size-limit 10240
Michael Albinus's avatar
Michael Albinus committed
54 55 56
  "The maximum file size where inline copying is preferred over an \
out-of-the-band copy.
If it is nil, out-of-the-band copy will be used without a check."
57 58 59 60 61
  :group 'tramp
  :type '(choice (const nil) integer))

;;;###tramp-autoload
(defcustom tramp-terminal-type "dumb"
62
  "Value of TERM environment variable for logging in to remote host.
63 64 65 66 67 68
Because Tramp wants to parse the output of the remote shell, it is easily
confused by ANSI color escape sequences and suchlike.  Often, shell init
files conditionalize this setup based on the TERM environment variable."
  :group 'tramp
  :type 'string)

69 70 71
(defconst tramp-color-escape-sequence-regexp "\e[[;0-9]+m"
  "Escape sequences produced by the \"ls\" command.")

72
;; ksh on OpenBSD 4.5 requires that $PS1 contains a `#' character for
73
;; root users.  It uses the `$' character for other users.  In order
74
;; to guarantee a proper prompt, we use "#$ " for the prompt.
75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93

(defvar tramp-end-of-output
  (format
   "///%s#$"
   (md5 (concat (prin1-to-string process-environment) (current-time-string))))
  "String used to recognize end of output.
The '$' character at the end is quoted; the string cannot be
detected as prompt when being sent on echoing hosts, therefore.")

;;;###tramp-autoload
(defconst tramp-initial-end-of-output "#$ "
  "Prompt when establishing a connection.")

;; Initialize `tramp-methods' with the supported methods.
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("rcp"
    (tramp-login-program        "rsh")
    (tramp-login-args           (("%h") ("-l" "%u")))
94 95
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
96
    (tramp-copy-program         "rcp")
Michael Albinus's avatar
Michael Albinus committed
97
    (tramp-copy-args            (("-p" "%k") ("-r")))
98 99 100 101 102 103 104
    (tramp-copy-keep-date       t)
    (tramp-copy-recursive       t)))
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("remcp"
    (tramp-login-program        "remsh")
    (tramp-login-args           (("%h") ("-l" "%u")))
105 106
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
107
    (tramp-copy-program         "rcp")
Michael Albinus's avatar
Michael Albinus committed
108
    (tramp-copy-args            (("-p" "%k")))
109 110
    (tramp-copy-keep-date       t)))
;;;###tramp-autoload
111
(add-to-list 'tramp-methods
112
  '("scp"
113
    (tramp-login-program        "ssh")
114
    (tramp-login-args           (("-l" "%u") ("-p" "%p") ("%c")
115
				 ("-e" "none") ("%h")))
116
    (tramp-async-args           (("-q")))
117 118
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
119
    (tramp-copy-program         "scp")
120
    (tramp-copy-args            (("-P" "%p") ("-p" "%k") ("-q") ("-r") ("%c")))
121 122 123 124 125 126 127 128
    (tramp-copy-keep-date       t)
    (tramp-copy-recursive       t)
    (tramp-gw-args              (("-o" "GlobalKnownHostsFile=/dev/null")
				 ("-o" "UserKnownHostsFile=/dev/null")
				 ("-o" "StrictHostKeyChecking=no")))
    (tramp-default-port         22)))
;;;###tramp-autoload
(add-to-list 'tramp-methods
129
  '("scpx"
130
    (tramp-login-program        "ssh")
131
    (tramp-login-args           (("-l" "%u") ("-p" "%p") ("%c")
132
				 ("-e" "none") ("-t" "-t") ("%h") ("/bin/sh")))
133
    (tramp-async-args           (("-q")))
134 135
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
136
    (tramp-copy-program         "scp")
137 138
    (tramp-copy-args            (("-P" "%p") ("-p" "%k")
				 ("-q") ("-r") ("%c")))
139
    (tramp-copy-keep-date       t)
140
    (tramp-copy-recursive       t)
141 142 143 144 145 146
    (tramp-gw-args              (("-o" "GlobalKnownHostsFile=/dev/null")
				 ("-o" "UserKnownHostsFile=/dev/null")
				 ("-o" "StrictHostKeyChecking=no")))
    (tramp-default-port         22)))
;;;###tramp-autoload
(add-to-list 'tramp-methods
147
  '("sftp"
148
    (tramp-login-program        "ssh")
149
    (tramp-login-args           (("-l" "%u") ("-p" "%p") ("%c")
150
				 ("-e" "none") ("%h")))
151
    (tramp-async-args           (("-q")))
152 153
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
154
    (tramp-copy-program         "sftp")
155
    (tramp-copy-args            ("%c"))))
156
 ;;;###tramp-autoload
157
(add-to-list 'tramp-methods
158
  '("rsync"
159
    (tramp-login-program        "ssh")
160
    (tramp-login-args           (("-l" "%u") ("-p" "%p") ("%c")
161 162
				 ("-e" "none") ("%h")))
    (tramp-async-args           (("-q")))
163 164
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
165
    (tramp-copy-program         "rsync")
Michael Albinus's avatar
Michael Albinus committed
166
    (tramp-copy-args            (("-t" "%k") ("-r")))
167
    (tramp-copy-env             (("RSYNC_RSH") ("ssh" "%c")))
168 169 170 171 172 173 174 175
    (tramp-copy-keep-date       t)
    (tramp-copy-keep-tmpfile    t)
    (tramp-copy-recursive       t)))
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("rsh"
    (tramp-login-program        "rsh")
    (tramp-login-args           (("%h") ("-l" "%u")))
176 177
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))))
178 179 180 181 182
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("remsh"
    (tramp-login-program        "remsh")
    (tramp-login-args           (("%h") ("-l" "%u")))
183 184
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))))
185 186
;;;###tramp-autoload
(add-to-list 'tramp-methods
187
  '("ssh"
188
    (tramp-login-program        "ssh")
189
    (tramp-login-args           (("-l" "%u") ("-p" "%p") ("%c")
190
				 ("-e" "none") ("%h")))
191
    (tramp-async-args           (("-q")))
192 193
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
194 195 196 197 198 199
    (tramp-gw-args              (("-o" "GlobalKnownHostsFile=/dev/null")
				 ("-o" "UserKnownHostsFile=/dev/null")
				 ("-o" "StrictHostKeyChecking=no")))
    (tramp-default-port         22)))
;;;###tramp-autoload
(add-to-list 'tramp-methods
200
  '("sshx"
201
    (tramp-login-program        "ssh")
202
    (tramp-login-args           (("-l" "%u") ("-p" "%p") ("%c")
203
				 ("-e" "none") ("-t" "-t") ("%h") ("/bin/sh")))
204
    (tramp-async-args           (("-q")))
205 206
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
207 208 209 210 211 212 213 214 215
    (tramp-gw-args              (("-o" "GlobalKnownHostsFile=/dev/null")
				 ("-o" "UserKnownHostsFile=/dev/null")
				 ("-o" "StrictHostKeyChecking=no")))
    (tramp-default-port         22)))
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("telnet"
    (tramp-login-program        "telnet")
    (tramp-login-args           (("%h") ("%p")))
216 217
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
218 219 220 221 222 223
    (tramp-default-port         23)))
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("su"
    (tramp-login-program        "su")
    (tramp-login-args           (("-") ("%u")))
224
    (tramp-remote-shell         "/bin/sh")
225 226
    (tramp-remote-shell-args    ("-c"))
    (tramp-connection-timeout   10)))
227 228 229 230 231
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("sudo"
    (tramp-login-program        "sudo")
    (tramp-login-args           (("-u" "%u") ("-s") ("-H") ("-p" "Password:")))
232
    (tramp-remote-shell         "/bin/sh")
233 234
    (tramp-remote-shell-args    ("-c"))
    (tramp-connection-timeout   10)))
235
;;;###tramp-autoload
236 237 238 239
(add-to-list 'tramp-methods
  '("ksu"
    (tramp-login-program        "ksu")
    (tramp-login-args           (("%u") ("-q")))
240
    (tramp-remote-shell         "/bin/sh")
241 242
    (tramp-remote-shell-args    ("-c"))
    (tramp-connection-timeout   10)))
243
;;;###tramp-autoload
244 245 246 247
(add-to-list 'tramp-methods
  '("krlogin"
    (tramp-login-program        "krlogin")
    (tramp-login-args           (("%h") ("-l" "%u") ("-x")))
248 249
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))))
250 251 252 253 254
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("plink"
    (tramp-login-program        "plink")
    (tramp-login-args           (("-l" "%u") ("-P" "%p") ("-ssh") ("%h")))
255 256
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
257 258 259 260 261 262 263 264 265 266 267 268 269
    (tramp-default-port         22)))
;;;###tramp-autoload
(add-to-list 'tramp-methods
  `("plinkx"
    (tramp-login-program        "plink")
    ;; ("%h") must be a single element, see
    ;; `tramp-compute-multi-hops'.
    (tramp-login-args           (("-load") ("%h") ("-t")
				 (,(format
				    "env 'TERM=%s' 'PROMPT_COMMAND=' 'PS1=%s'"
				    tramp-terminal-type
				    tramp-initial-end-of-output))
				 ("/bin/sh")))
270 271
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))))
272 273 274 275 276
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("pscp"
    (tramp-login-program        "plink")
    (tramp-login-args           (("-l" "%u") ("-P" "%p") ("-ssh") ("%h")))
277 278
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
279
    (tramp-copy-program         "pscp")
280
    (tramp-copy-args            (("-l" "%u") ("-P" "%p") ("-scp") ("-p" "%k")
281
				 ("-q") ("-r")))
282
    (tramp-copy-keep-date       t)
283
    (tramp-copy-recursive       t)
284 285 286 287 288 289
    (tramp-default-port         22)))
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("psftp"
    (tramp-login-program        "plink")
    (tramp-login-args           (("-l" "%u") ("-P" "%p") ("-ssh") ("%h")))
290 291
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-c"))
292
    (tramp-copy-program         "pscp")
293
    (tramp-copy-args            (("-l" "%u") ("-P" "%p") ("-sftp") ("-p" "%k")
294
				 ("-q") ("-r")))
295
    (tramp-copy-keep-date       t)
Michael Albinus's avatar
Michael Albinus committed
296
    (tramp-copy-recursive       t)))
297 298 299 300 301
;;;###tramp-autoload
(add-to-list 'tramp-methods
  '("fcp"
    (tramp-login-program        "fsh")
    (tramp-login-args           (("%h") ("-l" "%u") ("sh" "-i")))
302 303
    (tramp-remote-shell         "/bin/sh")
    (tramp-remote-shell-args    ("-i") ("-c"))
304
    (tramp-copy-program         "fcp")
Michael Albinus's avatar
Michael Albinus committed
305
    (tramp-copy-args            (("-p" "%k")))
306 307
    (tramp-copy-keep-date       t)))

308
;;;###tramp-autoload
309 310 311
(add-to-list 'tramp-default-method-alist
	     `(,tramp-local-host-regexp "\\`root\\'" "su"))

312
;;;###tramp-autoload
313
(add-to-list 'tramp-default-user-alist
314 315
	     `(,(concat "\\`" (regexp-opt '("su" "sudo" "ksu")) "\\'")
	       nil "root"))
316
;; Do not add "ssh" based methods, otherwise ~/.ssh/config would be ignored.
317
;; Do not add "plink" based methods, they ask interactively for the user.
318
;;;###tramp-autoload
319
(add-to-list 'tramp-default-user-alist
320 321
	     `(,(concat
		 "\\`"
322
		 (regexp-opt '("rcp" "remcp" "rsh" "telnet" "krlogin" "fcp"))
323
		 "\\'")
324 325
	       nil ,(user-login-name)))

326
;;;###tramp-autoload
327 328 329 330 331
(defconst tramp-completion-function-alist-rsh
  '((tramp-parse-rhosts "/etc/hosts.equiv")
    (tramp-parse-rhosts "~/.rhosts"))
  "Default list of (FUNCTION FILE) pairs to be examined for rsh methods.")

332
;;;###tramp-autoload
333 334 335 336 337 338 339 340 341 342 343 344 345 346 347
(defconst tramp-completion-function-alist-ssh
  '((tramp-parse-rhosts      "/etc/hosts.equiv")
    (tramp-parse-rhosts      "/etc/shosts.equiv")
    (tramp-parse-shosts      "/etc/ssh_known_hosts")
    (tramp-parse-sconfig     "/etc/ssh_config")
    (tramp-parse-shostkeys   "/etc/ssh2/hostkeys")
    (tramp-parse-sknownhosts "/etc/ssh2/knownhosts")
    (tramp-parse-rhosts      "~/.rhosts")
    (tramp-parse-rhosts      "~/.shosts")
    (tramp-parse-shosts      "~/.ssh/known_hosts")
    (tramp-parse-sconfig     "~/.ssh/config")
    (tramp-parse-shostkeys   "~/.ssh2/hostkeys")
    (tramp-parse-sknownhosts "~/.ssh2/knownhosts"))
  "Default list of (FUNCTION FILE) pairs to be examined for ssh methods.")

348
;;;###tramp-autoload
349 350 351 352
(defconst tramp-completion-function-alist-telnet
  '((tramp-parse-hosts "/etc/hosts"))
  "Default list of (FUNCTION FILE) pairs to be examined for telnet methods.")

353
;;;###tramp-autoload
354 355 356 357
(defconst tramp-completion-function-alist-su
  '((tramp-parse-passwd "/etc/passwd"))
  "Default list of (FUNCTION FILE) pairs to be examined for su methods.")

358
;;;###tramp-autoload
359
(defconst tramp-completion-function-alist-putty
Michael Albinus's avatar
Michael Albinus committed
360 361 362 363 364
  `((tramp-parse-putty
     ,(if (memq system-type '(windows-nt))
	  "HKEY_CURRENT_USER\\Software\\SimonTatham\\PuTTY\\Sessions"
	"~/.putty/sessions")))
  "Default list of (FUNCTION REGISTRY) pairs to be examined for putty sessions.")
365

366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390
;;;###tramp-autoload
(eval-after-load 'tramp
  '(progn
     (tramp-set-completion-function "rcp" tramp-completion-function-alist-rsh)
     (tramp-set-completion-function "remcp" tramp-completion-function-alist-rsh)
     (tramp-set-completion-function "scp" tramp-completion-function-alist-ssh)
     (tramp-set-completion-function "scpx" tramp-completion-function-alist-ssh)
     (tramp-set-completion-function "sftp" tramp-completion-function-alist-ssh)
     (tramp-set-completion-function "rsync" tramp-completion-function-alist-ssh)
     (tramp-set-completion-function "rsh" tramp-completion-function-alist-rsh)
     (tramp-set-completion-function "remsh" tramp-completion-function-alist-rsh)
     (tramp-set-completion-function "ssh" tramp-completion-function-alist-ssh)
     (tramp-set-completion-function "sshx" tramp-completion-function-alist-ssh)
     (tramp-set-completion-function
      "telnet" tramp-completion-function-alist-telnet)
     (tramp-set-completion-function "su" tramp-completion-function-alist-su)
     (tramp-set-completion-function "sudo" tramp-completion-function-alist-su)
     (tramp-set-completion-function "ksu" tramp-completion-function-alist-su)
     (tramp-set-completion-function
      "krlogin" tramp-completion-function-alist-rsh)
     (tramp-set-completion-function "plink" tramp-completion-function-alist-ssh)
     (tramp-set-completion-function
      "plinkx" tramp-completion-function-alist-putty)
     (tramp-set-completion-function "pscp" tramp-completion-function-alist-ssh)
     (tramp-set-completion-function "fcp" tramp-completion-function-alist-ssh)))
391 392 393 394 395 396 397

;; "getconf PATH" yields:
;; HP-UX: /usr/bin:/usr/ccs/bin:/opt/ansic/bin:/opt/langtools/bin:/opt/fortran/bin
;; Solaris: /usr/xpg4/bin:/usr/ccs/bin:/usr/bin:/opt/SUNWspro/bin
;; GNU/Linux (Debian, Suse): /bin:/usr/bin
;; FreeBSD: /usr/bin:/bin:/usr/sbin:/sbin: - beware trailing ":"!
;; IRIX64: /usr/bin
398
;;;###tramp-autoload
399
(defcustom tramp-remote-path
400 401 402
  '(tramp-default-remote-path "/bin" "/usr/bin" "/sbin" "/usr/sbin"
    "/usr/local/bin" "/usr/local/sbin" "/local/bin" "/local/freeware/bin"
    "/local/gnu/bin" "/usr/freeware/bin" "/usr/pkg/bin" "/usr/contrib/bin"
Michael Albinus's avatar
Michael Albinus committed
403
    "/opt/bin" "/opt/sbin" "/opt/local/bin")
404
  "List of directories to search for executables on remote host.
405 406 407 408 409 410 411 412 413
For every remote host, this variable will be set buffer local,
keeping the list of existing directories on that host.

You can use `~' in this list, but when searching for a shell which groks
tilde expansion, all directory names starting with `~' will be ignored.

`Default Directories' represent the list of directories given by
the command \"getconf PATH\".  It is recommended to use this
entry on top of this list, because these are the default
414 415 416
directories for POSIX compatible commands.  On remote hosts which
do not offer the getconf command (like cygwin), the value
\"/bin:/usr/bin\" is used instead of.
417 418 419 420 421 422 423 424 425

`Private Directories' are the settings of the $PATH environment,
as given in your `~/.profile'."
  :group 'tramp
  :type '(repeat (choice
		  (const :tag "Default Directories" tramp-default-remote-path)
		  (const :tag "Private Directories" tramp-own-remote-path)
		  (string :tag "Directory"))))

426
;;;###tramp-autoload
427
(defcustom tramp-remote-process-environment
428
  `("HISTFILE=$HOME/.tramp_history" "HISTSIZE=1" "TMOUT=0" "LC_ALL=C"
429 430 431
    ,(format "TERM=%s" tramp-terminal-type)
    "EMACS=t" ;; Deprecated.
    ,(format "INSIDE_EMACS='%s,tramp:%s'" emacs-version tramp-version)
432
    "CDPATH=" "HISTORY=" "MAIL=" "MAILCHECK=" "MAILPATH=" "PAGER=\"\""
433
    "autocorrect=" "correct=")
434
  "List of environment variables to be set on the remote host.
435 436

Each element should be a string of the form ENVVARNAME=VALUE.  An
Paul Eggert's avatar
Paul Eggert committed
437
entry ENVVARNAME= disables the corresponding environment variable,
438 439 440
which might have been set in the init files like ~/.profile.

Special handling is applied to the PATH environment, which should
441
not be set here. Instead, it should be set via `tramp-remote-path'."
442 443 444 445
  :group 'tramp
  :type '(repeat string))

(defcustom tramp-sh-extra-args '(("/bash\\'" . "-norc -noprofile"))
446
  "Alist specifying extra arguments to pass to the remote shell.
447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575
Entries are (REGEXP . ARGS) where REGEXP is a regular expression
matching the shell file name and ARGS is a string specifying the
arguments.

This variable is only used when Tramp needs to start up another shell
for tilde expansion.  The extra arguments should typically prevent the
shell from reading its init file."
  :group 'tramp
  ;; This might be the wrong way to test whether the widget type
  ;; `alist' is available.  Who knows the right way to test it?
  :type (if (get 'alist 'widget-type)
	    '(alist :key-type string :value-type string)
	  '(repeat (cons string string))))

(defconst tramp-actions-before-shell
  '((tramp-login-prompt-regexp tramp-action-login)
    (tramp-password-prompt-regexp tramp-action-password)
    (tramp-wrong-passwd-regexp tramp-action-permission-denied)
    (shell-prompt-pattern tramp-action-succeed)
    (tramp-shell-prompt-pattern tramp-action-succeed)
    (tramp-yesno-prompt-regexp tramp-action-yesno)
    (tramp-yn-prompt-regexp tramp-action-yn)
    (tramp-terminal-prompt-regexp tramp-action-terminal)
    (tramp-process-alive-regexp tramp-action-process-alive))
  "List of pattern/action pairs.
Whenever a pattern matches, the corresponding action is performed.
Each item looks like (PATTERN ACTION).

The PATTERN should be a symbol, a variable.  The value of this
variable gives the regular expression to search for.  Note that the
regexp must match at the end of the buffer, \"\\'\" is implicitly
appended to it.

The ACTION should also be a symbol, but a function.  When the
corresponding PATTERN matches, the ACTION function is called.")

(defconst tramp-actions-copy-out-of-band
  '((tramp-password-prompt-regexp tramp-action-password)
    (tramp-wrong-passwd-regexp tramp-action-permission-denied)
    (tramp-copy-failed-regexp tramp-action-permission-denied)
    (tramp-process-alive-regexp tramp-action-out-of-band))
  "List of pattern/action pairs.
This list is used for copying/renaming with out-of-band methods.

See `tramp-actions-before-shell' for more info.")

(defconst tramp-uudecode
  "(echo begin 600 /tmp/tramp.$$; tail +2) | uudecode
cat /tmp/tramp.$$
rm -f /tmp/tramp.$$"
  "Shell function to implement `uudecode' to standard output.
Many systems support `uudecode -o /dev/stdout' or `uudecode -o -'
for this or `uudecode -p', but some systems don't, and for them
we have this shell function.")

(defconst tramp-perl-file-truename
  "%s -e '
use File::Spec;
use Cwd \"realpath\";

sub recursive {
    my ($volume, @dirs) = @_;
    my $real = realpath(File::Spec->catpath(
                   $volume, File::Spec->catdir(@dirs), \"\"));
    if ($real) {
        my ($vol, $dir) = File::Spec->splitpath($real, 1);
        return ($vol, File::Spec->splitdir($dir));
    }
    else {
        my $last = pop(@dirs);
        ($volume, @dirs) = recursive($volume, @dirs);
        push(@dirs, $last);
        return ($volume, @dirs);
    }
}

$result = realpath($ARGV[0]);
if (!$result) {
    my ($vol, $dir) = File::Spec->splitpath($ARGV[0], 1);
    ($vol, @dirs) = recursive($vol, File::Spec->splitdir($dir));

    $result = File::Spec->catpath($vol, File::Spec->catdir(@dirs), \"\");
}

if ($ARGV[0] =~ /\\/$/) {
    $result = $result . \"/\";
}

print \"\\\"$result\\\"\\n\";
' \"$1\" 2>/dev/null"
  "Perl script to produce output suitable for use with `file-truename'
on the remote file system.
Escape sequence %s is replaced with name of Perl binary.
This string is passed to `format', so percent characters need to be doubled.")

(defconst tramp-perl-file-name-all-completions
  "%s -e 'sub case {
 my $str = shift;
 if ($ARGV[2]) {
  return lc($str);
 }
 else {
  return $str;
 }
}
opendir(d, $ARGV[0]) || die(\"$ARGV[0]: $!\\nfail\\n\");
@files = readdir(d); closedir(d);
foreach $f (@files) {
 if (case(substr($f, 0, length($ARGV[1]))) eq case($ARGV[1])) {
  if (-d \"$ARGV[0]/$f\") {
   print \"$f/\\n\";
  }
  else {
   print \"$f\\n\";
  }
 }
}
print \"ok\\n\"
' \"$1\" \"$2\" \"$3\" 2>/dev/null"
  "Perl script to produce output suitable for use with
`file-name-all-completions' on the remote file system.  Escape
sequence %s is replaced with name of Perl binary.  This string is
passed to `format', so percent characters need to be doubled.")

;; Perl script to implement `file-attributes' in a Lisp `read'able
;; output.  If you are hacking on this, note that you get *no* output
;; unless this spits out a complete line, including the '\n' at the
;; end.
;; The device number is returned as "-1", because there will be a virtual
576
;; device number set in `tramp-sh-handle-file-attributes'.
577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693
(defconst tramp-perl-file-attributes
  "%s -e '
@stat = lstat($ARGV[0]);
if (!@stat) {
    print \"nil\\n\";
    exit 0;
}
if (($stat[2] & 0170000) == 0120000)
{
    $type = readlink($ARGV[0]);
    $type = \"\\\"$type\\\"\";
}
elsif (($stat[2] & 0170000) == 040000)
{
    $type = \"t\";
}
else
{
    $type = \"nil\"
};
$uid = ($ARGV[1] eq \"integer\") ? $stat[4] : \"\\\"\" . getpwuid($stat[4]) . \"\\\"\";
$gid = ($ARGV[1] eq \"integer\") ? $stat[5] : \"\\\"\" . getgrgid($stat[5]) . \"\\\"\";
printf(
    \"(%%s %%u %%s %%s (%%u %%u) (%%u %%u) (%%u %%u) %%u.0 %%u t (%%u . %%u) -1)\\n\",
    $type,
    $stat[3],
    $uid,
    $gid,
    $stat[8] >> 16 & 0xffff,
    $stat[8] & 0xffff,
    $stat[9] >> 16 & 0xffff,
    $stat[9] & 0xffff,
    $stat[10] >> 16 & 0xffff,
    $stat[10] & 0xffff,
    $stat[7],
    $stat[2],
    $stat[1] >> 16 & 0xffff,
    $stat[1] & 0xffff
);' \"$1\" \"$2\" 2>/dev/null"
  "Perl script to produce output suitable for use with `file-attributes'
on the remote file system.
Escape sequence %s is replaced with name of Perl binary.
This string is passed to `format', so percent characters need to be doubled.")

(defconst tramp-perl-directory-files-and-attributes
  "%s -e '
chdir($ARGV[0]) or printf(\"\\\"Cannot change to $ARGV[0]: $''!''\\\"\\n\"), exit();
opendir(DIR,\".\") or printf(\"\\\"Cannot open directory $ARGV[0]: $''!''\\\"\\n\"), exit();
@list = readdir(DIR);
closedir(DIR);
$n = scalar(@list);
printf(\"(\\n\");
for($i = 0; $i < $n; $i++)
{
    $filename = $list[$i];
    @stat = lstat($filename);
    if (($stat[2] & 0170000) == 0120000)
    {
        $type = readlink($filename);
        $type = \"\\\"$type\\\"\";
    }
    elsif (($stat[2] & 0170000) == 040000)
    {
        $type = \"t\";
    }
    else
    {
        $type = \"nil\"
    };
    $uid = ($ARGV[1] eq \"integer\") ? $stat[4] : \"\\\"\" . getpwuid($stat[4]) . \"\\\"\";
    $gid = ($ARGV[1] eq \"integer\") ? $stat[5] : \"\\\"\" . getgrgid($stat[5]) . \"\\\"\";
    printf(
        \"(\\\"%%s\\\" %%s %%u %%s %%s (%%u %%u) (%%u %%u) (%%u %%u) %%u.0 %%u t (%%u . %%u) (%%u . %%u))\\n\",
        $filename,
        $type,
        $stat[3],
        $uid,
        $gid,
        $stat[8] >> 16 & 0xffff,
        $stat[8] & 0xffff,
        $stat[9] >> 16 & 0xffff,
        $stat[9] & 0xffff,
        $stat[10] >> 16 & 0xffff,
        $stat[10] & 0xffff,
        $stat[7],
        $stat[2],
        $stat[1] >> 16 & 0xffff,
        $stat[1] & 0xffff,
        $stat[0] >> 16 & 0xffff,
        $stat[0] & 0xffff);
}
printf(\")\\n\");' \"$1\" \"$2\" 2>/dev/null"
  "Perl script implementing `directory-files-attributes' as Lisp `read'able
output.
Escape sequence %s is replaced with name of Perl binary.
This string is passed to `format', so percent characters need to be doubled.")

;; These two use base64 encoding.
(defconst tramp-perl-encode-with-module
  "%s -MMIME::Base64 -0777 -ne 'print encode_base64($_)' 2>/dev/null"
  "Perl program to use for encoding a file.
Escape sequence %s is replaced with name of Perl binary.
This string is passed to `format', so percent characters need to be doubled.
This implementation requires the MIME::Base64 Perl module to be installed
on the remote host.")

(defconst tramp-perl-decode-with-module
  "%s -MMIME::Base64 -0777 -ne 'print decode_base64($_)' 2>/dev/null"
  "Perl program to use for decoding a file.
Escape sequence %s is replaced with name of Perl binary.
This string is passed to `format', so percent characters need to be doubled.
This implementation requires the MIME::Base64 Perl module to be installed
on the remote host.")

(defconst tramp-perl-encode
  "%s -e '
# This script contributed by Juanma Barranquero <lektu@terra.es>.
694
# Copyright (C) 2002-2013 Free Software Foundation, Inc.
695 696 697 698 699 700 701
use strict;

my %%trans = do {
    my $i = 0;
    map {(substr(unpack(q(B8), chr $i++), 2, 6), $_)}
      split //, q(ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/);
};
702
my $data;
703 704 705

# We read in chunks of 54 bytes, to generate output lines
# of 72 chars (plus end of line)
706
while (read STDIN, $data, 54) {
707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731
    my $pad = q();

    # Only for the last chunk, and only if did not fill the last three-byte packet
    if (eof) {
        my $mod = length($data) %% 3;
        $pad = q(=) x (3 - $mod) if $mod;
    }

    # Not the fastest method, but it is simple: unpack to binary string, split
    # by groups of 6 bits and convert back from binary to byte; then map into
    # the translation table
    print
      join q(),
        map($trans{$_},
            (substr(unpack(q(B*), $data) . q(00000), 0, 432) =~ /....../g)),
              $pad,
                qq(\\n);
}' 2>/dev/null"
  "Perl program to use for encoding a file.
Escape sequence %s is replaced with name of Perl binary.
This string is passed to `format', so percent characters need to be doubled.")

(defconst tramp-perl-decode
  "%s -e '
# This script contributed by Juanma Barranquero <lektu@terra.es>.
732
# Copyright (C) 2002-2013 Free Software Foundation, Inc.
733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772
use strict;

my %%trans = do {
    my $i = 0;
    map {($_, substr(unpack(q(B8), chr $i++), 2, 6))}
      split //, q(ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/)
};

my %%bytes = map {(unpack(q(B8), chr $_), chr $_)} 0 .. 255;

binmode(\\*STDOUT);

# We are going to accumulate into $pending to accept any line length
# (we do not check they are <= 76 chars as the RFC says)
my $pending = q();

while (my $data = <STDIN>) {
    chomp $data;

    # If we find one or two =, we have reached the end and
    # any following data is to be discarded
    my $finished = $data =~ s/(==?).*/$1/;
    $pending .= $data;

    my $len = length($pending);
    my $chunk = substr($pending, 0, $len & ~3);
    $pending = substr($pending, $len & ~3 + 1);

    # Easy method: translate from chars to (pregenerated) six-bit packets, join,
    # split in 8-bit chunks and convert back to char.
    print join q(),
      map $bytes{$_},
        ((join q(), map {$trans{$_} || q()} split //, $chunk) =~ /......../g);

    last if $finished;
}' 2>/dev/null"
  "Perl program to use for decoding a file.
Escape sequence %s is replaced with name of Perl binary.
This string is passed to `format', so percent characters need to be doubled.")

773 774 775 776 777 778 779 780 781 782
(defconst tramp-perl-pack
  "%s -e 'binmode STDIN; binmode STDOUT; print pack(q{u*}, join q{}, <>)'"
  "Perl program to use for encoding a file.
Escape sequence %s is replaced with name of Perl binary.")

(defconst tramp-perl-unpack
  "%s -e 'binmode STDIN; binmode STDOUT; print unpack(q{u*}, join q{}, <>)'"
  "Perl program to use for decoding a file.
Escape sequence %s is replaced with name of Perl binary.")

783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803
(defconst tramp-vc-registered-read-file-names
  "echo \"(\"
while read file; do
    if %s \"$file\"; then
	echo \"(\\\"$file\\\" \\\"file-exists-p\\\" t)\"
    else
	echo \"(\\\"$file\\\" \\\"file-exists-p\\\" nil)\"
    fi
    if %s \"$file\"; then
	echo \"(\\\"$file\\\" \\\"file-readable-p\\\" t)\"
    else
	echo \"(\\\"$file\\\" \\\"file-readable-p\\\" nil)\"
    fi
done
echo \")\""
  "Script to check existence of VC related files.
It must be send formatted with two strings; the tests for file
existence, and file readability.  Input shall be read via
here-document, otherwise the command could exceed maximum length
of command line.")

Michael Albinus's avatar
Michael Albinus committed
804
;; New handlers should be added here.
805
(defconst tramp-sh-file-name-handler-alist
Michael Albinus's avatar
Michael Albinus committed
806
  '(;; `access-file' performed by default handler.
807
    (add-name-to-file . tramp-sh-handle-add-name-to-file)
Michael Albinus's avatar
Michael Albinus committed
808
    ;; `byte-compiler-base-file-name' performed by default handler.
809
    (copy-directory . tramp-sh-handle-copy-directory)
Michael Albinus's avatar
Michael Albinus committed
810
    (copy-file . tramp-sh-handle-copy-file)
811 812
    (delete-directory . tramp-sh-handle-delete-directory)
    (delete-file . tramp-sh-handle-delete-file)
Michael Albinus's avatar
Michael Albinus committed
813
    ;; `diff-latest-backup-file' performed by default handler.
814
    (directory-file-name . tramp-handle-directory-file-name)
Michael Albinus's avatar
Michael Albinus committed
815 816 817 818 819 820 821 822
    (directory-files . tramp-handle-directory-files)
    (directory-files-and-attributes
     . tramp-sh-handle-directory-files-and-attributes)
    ;; `dired-call-process' performed by default handler.
    (dired-compress-file . tramp-sh-handle-dired-compress-file)
    (dired-recursive-delete-directory
     . tramp-sh-handle-dired-recursive-delete-directory)
    (dired-uncache . tramp-handle-dired-uncache)
823
    (expand-file-name . tramp-sh-handle-expand-file-name)
Michael Albinus's avatar
Michael Albinus committed
824 825 826 827 828 829 830 831
    (file-accessible-directory-p . tramp-handle-file-accessible-directory-p)
    (file-acl . tramp-sh-handle-file-acl)
    (file-attributes . tramp-sh-handle-file-attributes)
    (file-directory-p . tramp-sh-handle-file-directory-p)
    ;; `file-equal-p' performed by default handler.
    (file-executable-p . tramp-sh-handle-file-executable-p)
    (file-exists-p . tramp-sh-handle-file-exists-p)
    ;; `file-in-directory-p' performed by default handler.
832
    (file-local-copy . tramp-sh-handle-file-local-copy)
Michael Albinus's avatar
Michael Albinus committed
833 834 835 836 837 838 839 840 841 842 843 844 845
    (file-modes . tramp-handle-file-modes)
    (file-name-all-completions . tramp-sh-handle-file-name-all-completions)
    (file-name-as-directory . tramp-handle-file-name-as-directory)
    (file-name-completion . tramp-handle-file-name-completion)
    (file-name-directory . tramp-handle-file-name-directory)
    (file-name-nondirectory . tramp-handle-file-name-nondirectory)
    ;; `file-name-sans-versions' performed by default handler.
    (file-newer-than-file-p . tramp-sh-handle-file-newer-than-file-p)
    (file-notify-add-watch . tramp-sh-handle-file-notify-add-watch)
    (file-notify-rm-watch . tramp-handle-file-notify-rm-watch)
    (file-ownership-preserved-p . tramp-sh-handle-file-ownership-preserved-p)
    (file-readable-p . tramp-sh-handle-file-readable-p)
    (file-regular-p . tramp-handle-file-regular-p)
846
    (file-remote-p . tramp-handle-file-remote-p)
Michael Albinus's avatar
Michael Albinus committed
847 848 849 850 851 852 853 854
    (file-selinux-context . tramp-sh-handle-file-selinux-context)
    (file-symlink-p . tramp-handle-file-symlink-p)
    (file-truename . tramp-sh-handle-file-truename)
    (file-writable-p . tramp-sh-handle-file-writable-p)
    (find-backup-file-name . tramp-handle-find-backup-file-name)
    ;; `find-file-noselect' performed by default handler.
    ;; `get-file-buffer' performed by default handler.
    (insert-directory . tramp-sh-handle-insert-directory)
855 856
    (insert-file-contents . tramp-handle-insert-file-contents)
    (insert-file-contents-literally
857
     . tramp-sh-handle-insert-file-contents-literally)
Michael Albinus's avatar
Michael Albinus committed
858
    (load . tramp-handle-load)
859
    (make-auto-save-file-name . tramp-sh-handle-make-auto-save-file-name)
Michael Albinus's avatar
Michael Albinus committed
860 861 862 863
    (make-directory . tramp-sh-handle-make-directory)
    (make-symbolic-link . tramp-sh-handle-make-symbolic-link)
    (process-file . tramp-sh-handle-process-file)
    (rename-file . tramp-sh-handle-rename-file)
864
    (set-file-acl . tramp-sh-handle-set-file-acl)
Michael Albinus's avatar
Michael Albinus committed
865 866 867 868 869 870 871 872
    (set-file-modes . tramp-sh-handle-set-file-modes)
    (set-file-selinux-context . tramp-sh-handle-set-file-selinux-context)
    (set-file-times . tramp-sh-handle-set-file-times)
    (set-visited-file-modtime . tramp-sh-handle-set-visited-file-modtime)
    (shell-command . tramp-handle-shell-command)
    (start-file-process . tramp-sh-handle-start-file-process)
    (substitute-in-file-name . tramp-handle-substitute-in-file-name)
    (unhandled-file-name-directory . tramp-handle-unhandled-file-name-directory)
873
    (vc-registered . tramp-sh-handle-vc-registered)
Michael Albinus's avatar
Michael Albinus committed
874 875
    (verify-visited-file-modtime . tramp-sh-handle-verify-visited-file-modtime)
    (write-region . tramp-sh-handle-write-region))
876 877 878 879 880 881 882 883 884 885
  "Alist of handler functions.
Operations not mentioned here will be handled by the normal Emacs functions.")

;; This must be the last entry, because `identity' always matches.
;;;###tramp-autoload
(add-to-list 'tramp-foreign-file-name-handler-alist
	     '(identity . tramp-sh-file-name-handler) 'append)

;;; File Name Handler Functions:

886
(defun tramp-sh-handle-make-symbolic-link
887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927
  (filename linkname &optional ok-if-already-exists)
  "Like `make-symbolic-link' for Tramp files.
If LINKNAME is a non-Tramp file, it is used verbatim as the target of
the symlink.  If LINKNAME is a Tramp file, only the localname component is
used as the target of the symlink.

If LINKNAME is a Tramp file and the localname component is relative, then
it is expanded first, before the localname component is taken.  Note that
this can give surprising results if the user/host for the source and
target of the symlink differ."
  (with-parsed-tramp-file-name linkname l
    (let ((ln (tramp-get-remote-ln l))
	  (cwd (tramp-run-real-handler
		'file-name-directory (list l-localname))))
      (unless ln
	(tramp-error
	 l 'file-error
	 "Making a symbolic link.  ln(1) does not exist on the remote host."))

      ;; Do the 'confirm if exists' thing.
      (when (file-exists-p linkname)
	;; What to do?
	(if (or (null ok-if-already-exists) ; not allowed to exist
		(and (numberp ok-if-already-exists)
		     (not (yes-or-no-p
			   (format
			    "File %s already exists; make it a link anyway? "
			    l-localname)))))
	    (tramp-error
	     l 'file-already-exists "File %s already exists" l-localname)
	  (delete-file linkname)))

      ;; If FILENAME is a Tramp name, use just the localname component.
      (when (tramp-tramp-file-p filename)
	(setq filename
	      (tramp-file-name-localname
	       (tramp-dissect-file-name (expand-file-name filename)))))

      (tramp-flush-file-property l (file-name-directory l-localname))
      (tramp-flush-file-property l l-localname)

928 929 930
      ;; Right, they are on the same host, regardless of user, method,
      ;; etc.  We now make the link on the remote machine. This will
      ;; occur as the user that FILENAME belongs to.
931 932 933 934 935 936 937 938 939 940
      (tramp-send-command-and-check
       l
       (format
	"cd %s && %s -sf %s %s"
	(tramp-shell-quote-argument cwd)
	ln
	(tramp-shell-quote-argument filename)
	(tramp-shell-quote-argument l-localname))
       t))))

941
(defun tramp-sh-handle-file-truename (filename)
942 943
  "Like `file-truename' for Tramp files."
  (with-parsed-tramp-file-name (expand-file-name filename) nil
944
    (tramp-make-tramp-file-name method user host
945
      (with-tramp-file-property v localname "file-truename"
946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047
	(let ((result nil))			; result steps in reverse order
	  (tramp-message v 4 "Finding true name for `%s'" filename)
	  (cond
	   ;; Use GNU readlink --canonicalize-missing where available.
	   ((tramp-get-remote-readlink v)
	    (setq result
		  (tramp-send-command-and-read
		   v
		   (format "echo \"\\\"`%s --canonicalize-missing %s`\\\"\""
			   (tramp-get-remote-readlink v)
			   (tramp-shell-quote-argument localname)))))

	   ;; Use Perl implementation.
	   ((and (tramp-get-remote-perl v)
		 (tramp-get-connection-property v "perl-file-spec" nil)
		 (tramp-get-connection-property v "perl-cwd-realpath" nil))
	    (tramp-maybe-send-script
	     v tramp-perl-file-truename "tramp_perl_file_truename")
	    (setq result
		  (tramp-send-command-and-read
		   v
		   (format "tramp_perl_file_truename %s"
			   (tramp-shell-quote-argument localname)))))

	   ;; Do it yourself.  We bind `directory-sep-char' here for
	   ;; XEmacs on Windows, which would otherwise use backslash.
	   (t (let* ((directory-sep-char ?/)
		     (steps (tramp-compat-split-string localname "/"))
		     (localnamedir (tramp-run-real-handler
				    'file-name-as-directory (list localname)))
		     (is-dir (string= localname localnamedir))
		     (thisstep nil)
		     (numchase 0)
		     ;; Don't make the following value larger than
		     ;; necessary.  People expect an error message in
		     ;; a timely fashion when something is wrong;
		     ;; otherwise they might think that Emacs is hung.
		     ;; Of course, correctness has to come first.
		     (numchase-limit 20)
		     symlink-target)
		(while (and steps (< numchase numchase-limit))
		  (setq thisstep (pop steps))
		  (tramp-message
		   v 5 "Check %s"
		   (mapconcat 'identity
			      (append '("") (reverse result) (list thisstep))
			      "/"))
		  (setq symlink-target
			(nth 0 (file-attributes
				(tramp-make-tramp-file-name
				 method user host
				 (mapconcat 'identity
					    (append '("")
						    (reverse result)
						    (list thisstep))
					    "/")))))
		  (cond ((string= "." thisstep)
			 (tramp-message v 5 "Ignoring step `.'"))
			((string= ".." thisstep)
			 (tramp-message v 5 "Processing step `..'")
			 (pop result))
			((stringp symlink-target)
			 ;; It's a symlink, follow it.
			 (tramp-message
			  v 5 "Follow symlink to %s" symlink-target)
			 (setq numchase (1+ numchase))
			 (when (file-name-absolute-p symlink-target)
			   (setq result nil))
			 ;; If the symlink was absolute, we'll get a
			 ;; string like "/user@host:/some/target";
			 ;; extract the "/some/target" part from it.
			 (when (tramp-tramp-file-p symlink-target)
			   (unless (tramp-equal-remote filename symlink-target)
			     (tramp-error
			      v 'file-error
			      "Symlink target `%s' on wrong host"
			      symlink-target))
			   (setq symlink-target localname))
			 (setq steps
			       (append (tramp-compat-split-string
					symlink-target "/")
				       steps)))
			(t
			 ;; It's a file.
			 (setq result (cons thisstep result)))))
		(when (>= numchase numchase-limit)
		  (tramp-error
		   v 'file-error
		   "Maximum number (%d) of symlinks exceeded" numchase-limit))
		(setq result (reverse result))
		;; Combine list to form string.
		(setq result
		      (if result
			  (mapconcat 'identity (cons "" result) "/")
			"/"))
		(when (and is-dir
			   (or (string= "" result)
			       (not (string= (substring result -1) "/"))))
		  (setq result (concat result "/"))))))

	  (tramp-message v 4 "True name of `%s' is `%s'" localname result)
	  result)))))
1048 1049 1050

;; Basic functions.

1051
(defun tramp-sh-handle-file-exists-p (filename)
1052 1053
  "Like `file-exists-p' for Tramp files."
  (with-parsed-tramp-file-name filename nil
1054
    (with-tramp-file-property v localname "file-exists-p"
1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065
      (or (not (null (tramp-get-file-property
                      v localname "file-attributes-integer" nil)))
          (not (null (tramp-get-file-property
                      v localname "file-attributes-string" nil)))
	  (tramp-send-command-and-check
	   v
	   (format
	    "%s %s"
	    (tramp-get-file-exists-command v)
	    (tramp-shell-quote-argument localname)))))))

1066
(defun tramp-sh-handle-file-attributes (filename &optional id-format)
1067 1068 1069 1070 1071
  "Like `file-attributes' for Tramp files."
  (unless id-format (setq id-format 'integer))
  ;; Don't modify `last-coding-system-used' by accident.
  (let ((last-coding-system-used last-coding-system-used))
    (with-parsed-tramp-file-name (expand-file-name filename) nil
1072 1073
      (with-tramp-file-property
	  v localname (format "file-attributes-%s" id-format)
1074 1075 1076
	(save-excursion
	  (tramp-convert-file-attributes
	   v
1077 1078 1079 1080 1081 1082 1083 1084 1085
	   (or
	    (cond
	     ((tramp-get-remote-stat v)
	      (tramp-do-file-attributes-with-stat v localname id-format))
	     ((tramp-get-remote-perl v)
	      (tramp-do-file-attributes-with-perl v localname id-format))
	     (t nil))
	    ;; The scripts could fail, for example with huge file size.
	    (tramp-do-file-attributes-with-ls v localname id-format))))))))
1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144

(defun tramp-do-file-attributes-with-ls (vec localname &optional id-format)
  "Implement `file-attributes' for Tramp files using the ls(1) command."
  (let (symlinkp dirp
		 res-inode res-filemodes res-numlinks
		 res-uid res-gid res-size res-symlink-target)
    (tramp-message vec 5 "file attributes with ls: %s" localname)
    (tramp-send-command
     vec
     (format "(%s %s || %s -h %s) && %s %s %s"
	     (tramp-get-file-exists-command vec)
	     (tramp-shell-quote-argument localname)
	     (tramp-get-test-command vec)
	     (tramp-shell-quote-argument localname)
	     (tramp-get-ls-command vec)
	     (if (eq id-format 'integer) "-ildn" "-ild")
	     (tramp-shell-quote-argument localname)))
    ;; parse `ls -l' output ...
    (with-current-buffer (tramp-get-buffer vec)
      (when (> (buffer-size) 0)
        (goto-char (point-min))
        ;; ... inode
        (setq res-inode
              (condition-case err
                  (read (current-buffer))
                (invalid-read-syntax
                 (when (and (equal (cadr err)
                                   "Integer constant overflow in reader")
                            (string-match
                             "^[0-9]+\\([0-9][0-9][0-9][0-9][0-9]\\)\\'"
                             (car (cddr err))))
                   (let* ((big (read (substring (car (cddr err)) 0
                                                (match-beginning 1))))
                          (small (read (match-string 1 (car (cddr err)))))
                          (twiddle (/ small 65536)))
                     (cons (+ big twiddle)
                           (- small (* twiddle 65536))))))))
        ;; ... file mode flags
        (setq res-filemodes (symbol-name (read (current-buffer))))
        ;; ... number links
        (setq res-numlinks (read (current-buffer)))
        ;; ... uid and gid
        (setq res-uid (read (current-buffer)))
        (setq res-gid (read (current-buffer)))
        (if (eq id-format 'integer)
            (progn
              (unless (numberp res-uid) (setq res-uid -1))
              (unless (numberp res-gid) (setq res-gid -1)))
          (progn
            (unless (stringp res-uid) (setq res-uid (symbol-name res-uid)))
            (unless (stringp res-gid) (setq res-gid (symbol-name res-gid)))))
        ;; ... size
        (setq res-size (read (current-buffer)))
        ;; From the file modes, figure out other stuff.
        (setq symlinkp (eq ?l (aref res-filemodes 0)))
        (setq dirp (eq ?d (aref res-filemodes 0)))
        ;; if symlink, find out file name pointed to
        (when symlinkp
          (search-forward "-> ")
1145
          (setq res-symlink-target (buffer-substring (point) (point-at-eol))))
1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156
        ;; return data gathered
        (list
         ;; 0. t for directory, string (name linked to) for symbolic
         ;; link, or nil.
         (or dirp res-symlink-target)
         ;; 1. Number of links to file.
         res-numlinks
         ;; 2. File uid.
         res-uid
         ;; 3. File gid.
         res-gid
1157 1158 1159 1160
         ;; 4. Last access time, as a list of integers.  Normally this
         ;; would be in the same format as `current-time', but the
         ;; subseconds part is not currently implemented, and (0 0)
         ;; denotes an unknown time.
1161 1162
         ;; 5. Last modification time, likewise.
         ;; 6. Last status change time, likewise.
Paul Eggert's avatar
Paul Eggert committed
1163
         '(0 0) '(0 0) '(0 0)		;CCC how to find out?
1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196
         ;; 7. Size in bytes (-1, if number is out of range).
         res-size
         ;; 8. File modes, as a string of ten letters or dashes as in ls -l.
         res-filemodes
         ;; 9. t if file's gid would change if file were deleted and
         ;; recreated.  Will be set in `tramp-convert-file-attributes'
         t
         ;; 10. inode number.
         res-inode
         ;; 11. Device number.  Will be replaced by a virtual device number.
         -1
         )))))

(defun tramp-do-file-attributes-with-perl
  (vec localname &optional id-format)
  "Implement `file-attributes' for Tramp files using a Perl script."
  (tramp-message vec 5 "file attributes with perl: %s" localname)
  (tramp-maybe-send-script
   vec tramp-perl-file-attributes "tramp_perl_file_attributes")
  (tramp-send-command-and-read
   vec
   (format "tramp_perl_file_attributes %s %s"
	   (tramp-shell-quote-argument localname) id-format)))

(defun tramp-do-file-attributes-with-stat
  (vec localname &optional id-format)
  "Implement `file-attributes' for Tramp files using stat(1) command."
  (tramp-message vec 5 "file attributes with stat: %s" localname)
  (tramp-send-command-and-read
   vec
   (format
    ;; On Opsware, pdksh (which is the true name of ksh there) doesn't
    ;; parse correctly the sequence "((".  Therefore, we add a space.
1197
    "( (%s %s || %s -h %s) && %s -c '((\"%%N\") %%h %s %s %%Xe0 %%Ye0 %%Ze0 %%se0 \"%%A\" t %%ie0 -1)' %s || echo nil)"
1198 1199 1200 1201 1202
    (tramp-get-file-exists-command vec)
    (tramp-shell-quote-argument localname)
    (tramp-get-test-command vec)
    (tramp-shell-quote-argument localname)
    (tramp-get-remote-stat vec)
Michael Albinus's avatar
Michael Albinus committed
1203 1204
    (if (eq id-format 'integer) "%ue0" "\"%U\"")
    (if (eq id-format 'integer) "%ge0" "\"%G\"")
1205 1206
    (tramp-shell-quote-argument localname))))

1207
(defun tramp-sh-handle-set-visited-file-modtime (&optional time-list)
1208 1209 1210 1211 1212 1213 1214 1215 1216
  "Like `set-visited-file-modtime' for Tramp files."
  (unless (buffer-file-name)
    (error "Can't set-visited-file-modtime: buffer `%s' not visiting a file"
	   (buffer-name)))
  (if time-list
      (tramp-run-real-handler 'set-visited-file-modtime (list time-list))
    (let ((f (buffer-file-name))
	  coding-system-used)
      (with-parsed-tramp-file-name f nil
1217 1218
	(let* ((remote-file-name-inhibit-cache t)
	       (attr (file-attributes f))
1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241
	       ;; '(-1 65535) means file doesn't exists yet.
	       (modtime (or (nth 5 attr) '(-1 65535))))
	  (when (boundp 'last-coding-system-used)
	    (setq coding-system-used (symbol-value 'last-coding-system-used)))
	  ;; We use '(0 0) as a don't-know value.  See also
	  ;; `tramp-do-file-attributes-with-ls'.
	  (if (not (equal modtime '(0 0)))
	      (tramp-run-real-handler 'set-visited-file-modtime (list modtime))
	    (progn
	      (tramp-send-command
	       v
	       (format "%s -ild %s"
		       (tramp-get-ls-command v)
		       (tramp-shell-quote-argument localname)))
	      (setq attr (buffer-substring (point)
					   (progn (end-of-line) (point)))))
	    (tramp-set-file-property
	     v localname "visited-file-modtime-ild" attr))
	  (when (boundp 'last-coding-system-used)
	    (set 'last-coding-system-used coding-system-used))
	  nil)))))

;; This function makes the same assumption as
1242 1243
;; `tramp-sh-handle-set-visited-file-modtime'.
(defun tramp-sh-handle-verify-visited-file-modtime (buf)
1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259
  "Like `verify-visited-file-modtime' for Tramp files.
At the time `verify-visited-file-modtime' calls this function, we
already know that the buffer is visiting a file and that
`visited-file-modtime' does not return 0.  Do not call this
function directly, unless those two cases are already taken care
of."
  (with-current-buffer buf
    (let ((f (buffer-file-name)))
      ;; There is no file visiting the buffer, or the buffer has no
      ;; recorded last modification time, or there is no established
      ;; connection.
      (if (or (not f)
	      (eq (visited-file-modtime) 0)
	      (not (tramp-file-name-handler 'file-remote-p f nil 'connected)))
	  t
	(with-parsed-tramp-file-name f nil
1260 1261
	  (let* ((remote-file-name-inhibit-cache t)
		 (attr (file-attributes f))
1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294
		 (modtime (nth 5 attr))
		 (mt (visited-file-modtime)))

	    (cond
	     ;; File exists, and has a known modtime.
	     ((and attr (not (equal modtime '(0 0))))
	      (< (abs (tramp-time-diff
		       modtime
		       ;; For compatibility, deal with both the old
		       ;; (HIGH . LOW) and the new (HIGH LOW) return
		       ;; values of `visited-file-modtime'.
		       (if (atom (cdr mt))
			   (list (car mt) (cdr mt))
			 mt)))
		 2))
	     ;; Modtime has the don't know value.
	     (attr
	      (tramp-send-command
	       v
	       (format "%s -ild %s"
		       (tramp-get-ls-command v)
		       (tramp-shell-quote-argument localname)))
	      (with-current-buffer (tramp-get-buffer v)
		(setq attr (buffer-substring
			    (point) (progn (end-of-line) (point)))))
	      (equal
	       attr
	       (tramp-get-file-property
		v localname "visited-file-modtime-ild" "")))
	     ;; If file does not exist, say it is not modified if and
	     ;; only if that agrees with the buffer's record.
	     (t (equal mt '(-1 65535))))))))))

1295
(defun tramp-sh-handle-set-file-modes (filename mode)
1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306
  "Like `set-file-modes' for Tramp files."
  (with-parsed-tramp-file-name filename nil
    (tramp-flush-file-property v localname)
    ;; FIXME: extract the proper text from chmod's stderr.
    (tramp-barf-unless-okay
     v
     (format "chmod %s %s"
	     (tramp-compat-decimal-to-octal mode)
	     (tramp-shell-quote-argument localname))
     "Error while changing file's mode %s" filename)))

1307
(defun tramp-sh-handle-set-file-times (filename &optional time)
1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321
  "Like `set-file-times' for Tramp files."
  (if (file-remote-p filename)
      (with-parsed-tramp-file-name filename nil
	(tramp-flush-file-property v localname)
	(let ((time (if (or (null time) (equal time '(0 0)))
			(current-time)
		      time))
	      ;; With GNU Emacs, `format-time-string' has an optional
	      ;; parameter UNIVERSAL.  This is preferred, because we
	      ;; could handle the case when the remote host is located
	      ;; in a different time zone as the local host.
	      (utc (not (featurep 'xemacs))))
	  (tramp-send-command-and-check
	   v (format "%s touch -t %s %s"
1322
		     (if utc "env TZ=UTC" "")
1323 1324 1325 1326 1327 1328 1329 1330 1331
		     (if utc
			 (format-time-string "%Y%m%d%H%M.%S" time t)
		       (format-time-string "%Y%m%d%H%M.%S" time))
		     (tramp-shell-quote-argument localname)))))

    ;; We handle also the local part, because in older Emacsen,
    ;; without `set-file-times', this function is an alias for this.
    ;; We are local, so we don't need the UTC settings.
    (zerop
1332
     (tramp-call-process
1333 1334 1335 1336 1337 1338 1339
      "touch" nil nil nil "-t"
      (format-time-string "%Y%m%d%H%M.%S" time)
      (tramp-shell-quote-argument filename)))))

(defun tramp-set-file-uid-gid (filename &optional uid gid)
  "Set the ownership for FILENAME.
If UID and GID are provided, these values are used; otherwise uid
1340 1341
and gid of the corresponding user is taken.  Both parameters must
be non-negative integers."
1342 1343 1344 1345 1346
  ;; Modern Unices allow chown only for root.  So we might need
  ;; another implementation, see `dired-do-chown'.  OTOH, it is mostly
  ;; working with su(do)? when it is needed, so it shall succeed in
  ;; the majority of cases.
  ;; Don't modify `last-coding-system-used' by accident.
1347
  (let ((last-coding-system-used last-coding-system-used))
1348 1349 1350 1351 1352
    (if (file-remote-p filename)
	(with-parsed-tramp-file-name filename nil
	  (if (and (zerop (user-uid)) (tramp-local-host-p v))
	      ;; If we are root on the local host, we can do it directly.
	      (tramp-set-file-uid-gid localname uid gid)
1353
	    (let ((uid (or (and (natnump uid) uid)
1354
			   (tramp-get-remote-uid v 'integer)))
1355
		  (gid (or (and (natnump gid) gid)
1356 1357 1358 1359 1360 1361 1362 1363
			   (tramp-get-remote-gid v 'integer))))
	      (tramp-send-command
	       v (format
		  "chown %d:%d %s" uid gid
		  (tramp-shell-quote-argument localname))))))

      ;; We handle also the local part, because there doesn't exist
      ;; `set-file-uid-gid'.  On W32 "chown" might not work.
1364 1365
      (let ((uid (or (and (natnump uid) uid) (tramp-get-local-uid 'integer)))
	    (gid (or (and (natnump gid) gid) (tramp-get-local-gid 'integer))))
1366
	(tramp-call-process
1367 1368 1369 1370 1371
	 "chown" nil nil nil
         (format "%d:%d" uid gid) (tramp-shell-quote-argument filename))))))

(defun tramp-remote-selinux-p (vec)
  "Check, whether SELINUX is enabled on the remote host."
1372 1373
  (with-tramp-connection-property
      (tramp-get-connection-process vec) "selinux-p"
1374 1375 1376 1377 1378 1379 1380 1381
    (let ((result (tramp-find-executable
		   vec "getenforce" (tramp-get-remote-path vec) t t)))
      (and result
	   (string-equal
	    (tramp-send-command-and-read
	     vec (format "echo \\\"`%S`\\\"" result))
	    "Enforcing")))))

1382
(defun tramp-sh-handle-file-selinux-context (filename)
1383 1384
  "Like `file-selinux-context' for Tramp files."
  (with-parsed-tramp-file-name filename nil
1385
    (with-tramp-file-property v localname "file-selinux-context"
1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396
      (let ((context '(nil nil nil nil))
	    (regexp (concat "\\([a-z0-9_]+\\):" "\\([a-z0-9_]+\\):"
			    "\\([a-z0-9_]+\\):" "\\([a-z0-9_]+\\)")))
	(when (and (tramp-remote-selinux-p v)
		   (tramp-send-command-and-check
		    v (format
		       "%s -d -Z %s"
		       (tramp-get-ls-command v)
		       (tramp-shell-quote-argument localname))))
	  (with-current-buffer (tramp-get-connection-buffer v)
	    (goto-char (point-min))
1397
	    (when (re-search-forward regexp (point-at-eol) t)
1398 1399 1400 1401 1402
	      (setq context (list (match-string 1) (match-string 2)
				  (match-string 3) (match-string 4))))))
	;; Return the context.
	context))))

1403
(defun tramp-sh-handle-set-file-selinux-context (filename context)
1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418
  "Like `set-file-selinux-context' for Tramp files."
  (with-parsed-tramp-file-name filename nil
    (if (and (consp context)
	     (tramp-remote-selinux-p v)
	     (tramp-send-command-and-check
	      v (format "chcon %s %s %s %s %s"
			(if (stringp (nth 0 context))
			    (format "--user=%s" (nth 0 context)) "")
			(if (stringp (nth 1 context))
			    (format "--role=%s" (nth 1 context)) "")
			(if (stringp (nth 2 context))
			    (format "--type=%s" (nth 2 context)) "")
			(if (stringp (nth 3 context))
			    (format "--range=%s" (nth 3 context)) "")
			(tramp-shell-quote-argument localname))))
1419 1420 1421 1422 1423
	(progn
	  (tramp-set-file-property v localname "file-selinux-context" context)
	  t)
      (tramp-set-file-property v localname "file-selinux-context" 'undef)
      nil)))
1424

1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436
(defun tramp-remote-acl-p (vec)
  "Check, whether ACL is enabled on the remote host."
  (with-tramp-connection-property (tramp-get-connection-process vec) "acl-p"
    (tramp-send-command-and-check vec "getfacl /")))

(defun tramp-sh-handle-file-acl (filename)
  "Like `file-acl' for Tramp files."
  (with-parsed-tramp-file-name filename nil
    (with-tramp-file-property v localname "file-acl"
      (when (and (tramp-remote-acl-p v)
		 (tramp-send-command-and-check
		  v (format
1437 <