configure.ac 154 KB
Newer Older
1 2 3 4 5 6
dnl  Autoconf script for GNU Emacs
dnl To rebuild the `configure' script from this, execute the command
dnl 	autoconf
dnl in the directory containing this script.
dnl If you changed any AC_DEFINES, also run autoheader.
dnl
Glenn Morris's avatar
Glenn Morris committed
7
dnl Copyright (C) 1994-1996, 1999-2012 Free Software Foundation, Inc.
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
dnl
dnl  This file is part of GNU Emacs.
dnl
dnl  GNU Emacs is free software: you can redistribute it and/or modify
dnl  it under the terms of the GNU General Public License as published by
dnl  the Free Software Foundation, either version 3 of the License, or
dnl  (at your option) any later version.
dnl
dnl  GNU Emacs is distributed in the hope that it will be useful,
dnl  but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
dnl  GNU General Public License for more details.
dnl
dnl  You should have received a copy of the GNU General Public License
dnl  along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.

AC_PREREQ(2.65)
Chong Yidong's avatar
Chong Yidong committed
25
AC_INIT(emacs, 24.2.50)
26 27
AC_CONFIG_HEADER(src/config.h:src/config.in)
AC_CONFIG_SRCDIR(src/lisp.h)
28
AC_CONFIG_AUX_DIR(build-aux)
Glenn Morris's avatar
Glenn Morris committed
29 30
dnl Fairly arbitrary, older versions might work too.
AM_INIT_AUTOMAKE(1.11)
31 32 33 34 35 36 37 38 39 40

dnl Support for --program-prefix, --program-suffix and
dnl --program-transform-name options
AC_ARG_PROGRAM

dnl It is important that variables on the RHS not be expanded here,
dnl hence the single quotes.  This is per the GNU coding standards, see
dnl (autoconf) Installation Directory Variables
dnl See also epaths.h below.
lispdir='${datadir}/emacs/${version}/lisp'
41
leimdir='${datadir}/emacs/${version}/leim'
42
standardlisppath='${lispdir}:${leimdir}'
43 44
locallisppath='${datadir}/emacs/${version}/site-lisp:'\
'${datadir}/emacs/site-lisp'
45
lisppath='${locallisppath}:${standardlisppath}'
46 47 48 49 50
etcdir='${datadir}/emacs/${version}/etc'
archlibdir='${libexecdir}/emacs/${version}/${configuration}'
docdir='${datadir}/emacs/${version}/etc'
gamedir='${localstatedir}/games/emacs'

51 52 53
dnl Special option to disable the most of other options.
AC_ARG_WITH(all,
[AS_HELP_STRING([--without-all],
54 55
		[omit almost all features and build
		small executable with minimal dependencies])],
56 57
  with_features=$withval,
  with_features=yes)
58

59 60 61 62 63 64 65 66 67 68 69 70 71 72 73
dnl OPTION_DEFAULT_OFF(NAME, HELP-STRING)
dnl Create a new --with option that defaults to being disabled.
dnl NAME is the base name of the option.  The shell variable with_NAME
dnl   will be set to either the user's value (if the option is
dnl   specified; 'yes' for a plain --with-NAME) or to 'no' (if the
dnl   option is not specified).  Note that the shell variable name is
dnl   constructed as autoconf does, by replacing non-alphanumeric
dnl   characters with "_".
dnl HELP-STRING is the help text for the option.
AC_DEFUN([OPTION_DEFAULT_OFF], [dnl
  AC_ARG_WITH([$1],[AS_HELP_STRING([--with-$1],[$2])],[],[dnl
    m4_bpatsubst([with_$1], [[^0-9a-z]], [_])=no])dnl
])dnl

dnl OPTION_DEFAULT_ON(NAME, HELP-STRING)
74 75
dnl Create a new --with option that defaults to $enable_features.
dnl NAME is the base name of the option.  The shell variable with_NAME
76 77 78 79 80 81 82
dnl   will be set either to 'no' (for a plain --without-NAME) or to
dnl   'yes' (if the option is not specified).  Note that the shell
dnl   variable name is constructed as autoconf does, by replacing
dnl   non-alphanumeric characters with "_".
dnl HELP-STRING is the help text for the option.
AC_DEFUN([OPTION_DEFAULT_ON], [dnl
  AC_ARG_WITH([$1],[AS_HELP_STRING([--without-$1],[$2])],[],[dnl
83
   m4_bpatsubst([with_$1], [[^0-9a-z]], [_])=$with_features])dnl
84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135
])dnl

OPTION_DEFAULT_ON([pop],[don't support POP mail retrieval with movemail])
if test "$with_pop" = yes; then
   AC_DEFINE(MAIL_USE_POP)
fi
AH_TEMPLATE(MAIL_USE_POP, [Define to support POP mail retrieval.])dnl

OPTION_DEFAULT_OFF([kerberos],[support Kerberos-authenticated POP])
if test "$with_kerberos" != no; then
   AC_DEFINE(KERBEROS)
fi
AH_TEMPLATE(KERBEROS,
	    [Define to support Kerberos-authenticated POP mail retrieval.])dnl

OPTION_DEFAULT_OFF([kerberos5],[support Kerberos version 5 authenticated POP])
if test "${with_kerberos5}" != no; then
  if test "${with_kerberos}" = no; then
    with_kerberos=yes
    AC_DEFINE(KERBEROS)
  fi
  AC_DEFINE(KERBEROS5, 1, [Define to use Kerberos 5 instead of Kerberos 4.])
fi

OPTION_DEFAULT_OFF([hesiod],[support Hesiod to get the POP server host])
dnl FIXME hesiod support may not be present, so it seems like an error
dnl to define, or at least use, this unconditionally.
if test "$with_hesiod" != no; then
  AC_DEFINE(HESIOD, 1, [Define to support using a Hesiod database to find the POP server.])
fi

OPTION_DEFAULT_OFF([mmdf],[support MMDF mailboxes])
if test "$with_mmdf" != no; then
   AC_DEFINE(MAIL_USE_MMDF, 1, [Define to support MMDF mailboxes in movemail.])
fi

OPTION_DEFAULT_OFF([mail-unlink],[unlink, rather than empty, mail spool after reading])
if test "$with_mail_unlink" != no; then
   AC_DEFINE(MAIL_UNLINK_SPOOL, 1, [Define to unlink, rather than empty, mail spool after reading.])
fi

AC_ARG_WITH([mailhost],[AS_HELP_STRING([--with-mailhost=HOSTNAME],
    [string giving default POP mail host])],
    AC_DEFINE_UNQUOTED(MAILHOST, ["$withval"], [String giving fallback POP mail host.]))

OPTION_DEFAULT_ON([sound],[don't compile with sound support])

dnl FIXME currently it is not the last.
dnl This should be the last --with option, because --with-x is
dnl added later on when we find the path of X, and it's best to
dnl keep them together visually.
AC_ARG_WITH([x-toolkit],[AS_HELP_STRING([--with-x-toolkit=KIT],
136
 [use an X toolkit (KIT one of: yes or gtk, gtk2, gtk3, lucid or athena, motif, no)])],
137 138 139 140 141 142 143
[	  case "${withval}" in
	    y | ye | yes )	val=gtk ;;
	    n | no )		val=no  ;;
	    l | lu | luc | luci | lucid )	val=lucid ;;
	    a | at | ath | athe | athen | athena )	val=athena ;;
	    m | mo | mot | moti | motif )	val=motif ;;
	    g | gt | gtk  )	val=gtk ;;
144
	    gtk2  )	val=gtk2 ;;
145 146 147
	    gtk3  )	val=gtk3 ;;
	    * )
AC_MSG_ERROR([`--with-x-toolkit=$withval' is invalid;
148 149 150
this option's value should be `yes', `no', `lucid', `athena', `motif', `gtk',
`gtk2' or `gtk3'.  `yes' and `gtk' are synonyms.
`athena' and `lucid' are synonyms.])
151 152 153 154 155
	    ;;
	  esac
	  with_x_toolkit=$val
])

Paul Eggert's avatar
Paul Eggert committed
156 157 158 159 160
OPTION_DEFAULT_OFF([wide-int], [prefer wide Emacs integers (typically 62-bit)])
if test "$with_wide_int" = yes; then
  AC_DEFINE([WIDE_EMACS_INT], 1, [Use long long for EMACS_INT if available.])
fi

161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178
dnl _ON results in a '--without' option in the --help output, so
dnl the help text should refer to "don't compile", etc.
OPTION_DEFAULT_ON([xpm],[don't compile with XPM image support])
OPTION_DEFAULT_ON([jpeg],[don't compile with JPEG image support])
OPTION_DEFAULT_ON([tiff],[don't compile with TIFF image support])
OPTION_DEFAULT_ON([gif],[don't compile with GIF image support])
OPTION_DEFAULT_ON([png],[don't compile with PNG image support])
OPTION_DEFAULT_ON([rsvg],[don't compile with SVG image support])
OPTION_DEFAULT_ON([xml2],[don't compile with XML parsing support])
OPTION_DEFAULT_ON([imagemagick],[don't compile with ImageMagick image support])

OPTION_DEFAULT_ON([xft],[don't use XFT for anti aliased fonts])
OPTION_DEFAULT_ON([libotf],[don't use libotf for OpenType font support])
OPTION_DEFAULT_ON([m17n-flt],[don't use m17n-flt for text shaping])

OPTION_DEFAULT_ON([toolkit-scroll-bars],[don't use Motif or Xaw3d scroll bars])
OPTION_DEFAULT_ON([xaw3d],[don't use Xaw3d])
OPTION_DEFAULT_ON([xim],[don't use X11 XIM])
179
OPTION_DEFAULT_OFF([ns],[use NeXTstep (Cocoa or GNUstep) windowing system])
180 181 182 183

OPTION_DEFAULT_ON([gpm],[don't use -lgpm for mouse support on a GNU/Linux console])
OPTION_DEFAULT_ON([dbus],[don't compile with D-Bus support])
OPTION_DEFAULT_ON([gconf],[don't compile with GConf support])
184
OPTION_DEFAULT_ON([gsettings],[don't compile with GSettings support])
185 186 187 188 189 190 191 192
OPTION_DEFAULT_ON([selinux],[don't compile with SELinux support])
OPTION_DEFAULT_ON([gnutls],[don't use -lgnutls for SSL/TLS support])

## For the times when you want to build Emacs but don't have
## a suitable makeinfo, and can live without the manuals.
dnl http://lists.gnu.org/archive/html/emacs-devel/2008-04/msg01844.html
OPTION_DEFAULT_ON([makeinfo],[don't require makeinfo for building manuals])

193 194 195
## Makefile.in needs the cache file name.
AC_SUBST(cache_file)

196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220
## This is an option because I do not know if all info/man support
## compressed files, nor how to test if they do so.
OPTION_DEFAULT_ON([compress-info],[don't compress the installed Info pages])
if test $with_compress_info = yes; then
   GZIP_INFO=yes
else
   GZIP_INFO=
fi
AC_SUBST(GZIP_INFO)

AC_ARG_WITH([pkg-config-prog],dnl
[AS_HELP_STRING([--with-pkg-config-prog=PATH],
                  [path to pkg-config for finding GTK and librsvg])])
if test "X${with_pkg_config_prog}" != X; then
   if test "${with_pkg_config_prog}" != yes; then
      PKG_CONFIG="${with_pkg_config_prog}"
   fi
fi

CRT_DIR=
AC_ARG_WITH([crt-dir],dnl
[AS_HELP_STRING([--with-crt-dir=DIR],[directory containing crtn.o etc.
The default is /usr/lib, or /usr/lib64 on some platforms.])])
CRT_DIR="${with_crt_dir}"

221 222 223 224 225 226
AC_ARG_WITH(gameuser,dnl
[AS_HELP_STRING([--with-gameuser=USER],[user for shared game score files])])
test "X${with_gameuser}" != X && test "${with_gameuser}" != yes \
  && gameuser="${with_gameuser}"
test "X$gameuser" = X && gameuser=games

227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255
AC_ARG_WITH([gnustep-conf],dnl
[AS_HELP_STRING([--with-gnustep-conf=PATH],[path to GNUstep.conf; default $GNUSTEP_CONFIG_FILE, or /etc/GNUstep/GNUstep.conf])])
test "X${with_gnustep_conf}" != X && test "${with_gnustep_conf}" != yes && \
  GNUSTEP_CONFIG_FILE="${with_gnustep_conf}"
test "X$GNUSTEP_CONFIG_FILE" = "X" && \
     GNUSTEP_CONFIG_FILE=/etc/GNUstep/GNUstep.conf

AC_ARG_ENABLE(ns-self-contained,
[AS_HELP_STRING([--disable-ns-self-contained],
                [disable self contained build under NeXTstep])],
   EN_NS_SELF_CONTAINED=$enableval,
   EN_NS_SELF_CONTAINED=yes)

AC_ARG_ENABLE(locallisppath,
[AS_HELP_STRING([--enable-locallisppath=PATH],
                [directories Emacs should search for lisp files specific
		 to this site])],
if test "${enableval}" = "no"; then
  locallisppath=
elif test "${enableval}" != "yes"; then
  locallisppath=${enableval}
fi)

AC_ARG_ENABLE(checking,
[AS_HELP_STRING([--enable-checking@<:@=LIST@:>@],
		[enable expensive run-time checks.  With LIST,
		 enable only specific categories of checks.
		 Categories are: all,yes,no.
		 Flags are: stringbytes, stringoverrun, stringfreelist,
256
		 xmallocoverrun, conslist, glyphs])],
257 258 259 260 261 262 263 264 265 266 267 268
[ac_checking_flags="${enableval}"],[])
IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="$IFS,"
for check in $ac_checking_flags
do
	case $check in
	# these set all the flags to specific states
	yes)		ac_enable_checking=1 ;;
	no)		ac_enable_checking= ;
			ac_gc_check_stringbytes= ;
	                ac_gc_check_string_overrun= ;
	                ac_gc_check_string_free_list= ;
	                ac_xmalloc_overrun= ;
269
	                ac_gc_check_cons_list= ;
270
			ac_glyphs_debug= ;;
271 272 273 274 275
	all)		ac_enable_checking=1 ;
			ac_gc_check_stringbytes=1 ;
	                ac_gc_check_string_overrun=1 ;
	                ac_gc_check_string_free_list=1 ;
	                ac_xmalloc_overrun=1 ;
276
	                ac_gc_check_cons_list=1 ;
277
			ac_glyphs_debug=1 ;;
278 279 280 281 282 283
	# these enable particular checks
	stringbytes) 	ac_gc_check_stringbytes=1 ;;
	stringoverrun) 	ac_gc_check_string_overrun=1 ;;
	stringfreelist) ac_gc_check_string_free_list=1 ;;
	xmallocoverrun)	ac_xmalloc_overrun=1 ;;
	conslist)	ac_gc_check_cons_list=1 ;;
284
	glyphs)		ac_glyphs_debug=1 ;;
285 286 287 288 289 290 291
	*)	AC_MSG_ERROR(unknown check category $check) ;;
	esac
done
IFS="$ac_save_IFS"

if test x$ac_enable_checking != x ; then
  AC_DEFINE(ENABLE_CHECKING, 1,
292
[Define to 1 if expensive run-time data type and consistency checks are enabled.])
293 294 295 296 297 298 299
fi
if test x$ac_gc_check_stringbytes != x ; then
  AC_DEFINE(GC_CHECK_STRING_BYTES, 1,
[Define this temporarily to hunt a bug.  If defined, the size of
   strings is redundantly recorded in sdata structures so that it can
   be compared to the sizes recorded in Lisp strings.])
fi
300
if test x$ac_gc_check_string_overrun != x ; then
301 302 303 304 305 306 307 308 309 310 311 312 313 314 315
  AC_DEFINE(GC_CHECK_STRING_OVERRUN, 1,
[Define this to check for short string overrun.])
fi
if test x$ac_gc_check_string_free_list != x ; then
  AC_DEFINE(GC_CHECK_STRING_FREE_LIST, 1,
[Define this to check the string free list.])
fi
if test x$ac_xmalloc_overrun != x ; then
  AC_DEFINE(XMALLOC_OVERRUN_CHECK, 1,
[Define this to check for malloc buffer overrun.])
fi
if test x$ac_gc_check_cons_list != x ; then
  AC_DEFINE(GC_CHECK_CONS_LIST, 1,
[Define this to check for errors in cons list.])
fi
316
if test x$ac_glyphs_debug != x ; then
317 318 319
  AC_DEFINE(GLYPH_DEBUG, 1,
[Define this to enable glyphs debugging code.])
fi
320

321 322 323 324
AC_ARG_ENABLE(check-lisp-object-type,
[AS_HELP_STRING([--enable-check-lisp-object-type],
                [enable compile time checks for the Lisp_Object data type.
		This is useful for development for catching certain types of bugs.])],
325
if test "${enableval}" != "no"; then
326 327
   AC_DEFINE(CHECK_LISP_OBJECT_TYPE, 1,
   [Define this to enable compile time checks for the Lisp_Object data type.])
328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391
fi)


AC_ARG_ENABLE(profiling,
[AS_HELP_STRING([--enable-profiling],
		[build emacs with profiling support.
		 This might not work on all platforms])],
[ac_enable_profiling="${enableval}"],[])
if test x$ac_enable_profiling != x ; then
   PROFILING_CFLAGS="-DPROFILING=1 -pg"
else
   PROFILING_CFLAGS=
fi
AC_SUBST(PROFILING_CFLAGS)

AC_ARG_ENABLE(autodepend,
[AS_HELP_STRING([--enable-autodepend],
		[automatically generate dependencies to .h-files.
 		 Requires GNU Make and Gcc. Enabled if GNU Make and Gcc is
 		 found])],
[ac_enable_autodepend="${enableval}"],[ac_enable_autodepend=yes])

#### Make srcdir absolute, if it isn't already.  It's important to
#### avoid running the path through pwd unnecessarily, since pwd can
#### give you automounter prefixes, which can go away.  We do all this
#### so Emacs can find its files when run uninstalled.
## Make sure CDPATH doesn't affect cd (in case PWD is relative).
unset CDPATH
case "${srcdir}" in
  /* ) ;;
  . )
    ## We may be able to use the $PWD environment variable to make this
    ## absolute.  But sometimes PWD is inaccurate.
    ## Note: we used to use ${PWD} at the end instead of `pwd`,
    ## but that tested only for a well-formed and valid PWD,
    ## it did not object when PWD was well-formed and valid but just wrong.
    if test ".${PWD}" != "." && test ".`(cd ${PWD} ; sh -c pwd)`" = ".`pwd`"  ;
    then
      srcdir="$PWD"
    else
      srcdir="`(cd ${srcdir}; pwd)`"
    fi
  ;;
  *  ) srcdir="`(cd ${srcdir}; pwd)`" ;;
esac

### Canonicalize the configuration name.

AC_CANONICAL_HOST
canonical=$host
configuration=${host_alias-${build_alias-$host}}

dnl This used to use changequote, but, apart from `changequote is evil'
dnl per the autoconf manual, we can speed up autoconf somewhat by quoting
dnl the great gob of text.  Thus it's not processed for possible expansion.
dnl Just make sure the brackets remain balanced.
dnl
dnl Since Emacs can't find matching pairs of quotes, boundaries are
dnl indicated by comments.
dnl quotation begins
[

### If you add support for a new configuration, add code to this
### switch statement to recognize your configuration name and select
Paul Eggert's avatar
Paul Eggert committed
392
### the appropriate operating system file.
393

Paul Eggert's avatar
Paul Eggert committed
394
### You would hope that you could choose an s/*.h
395
### file based on the operating system portion.  However, it turns out
Paul Eggert's avatar
Paul Eggert committed
396
### that each s/*.h file is pretty manufacturer-specific.
397 398 399 400 401 402 403 404 405
### So we basically have to have a special case for each
### configuration name.
###
### As far as handling version numbers on operating systems is
### concerned, make sure things will fail in a fixable way.  If
### /etc/MACHINES doesn't say anything about version numbers, be
### prepared to handle anything reasonably.  If version numbers
### matter, be sure /etc/MACHINES says something about it.

Paul Eggert's avatar
Paul Eggert committed
406
opsys='' unported=no
407 408
case "${canonical}" in

409 410
  ## GNU/Linux and similar ports
  *-*-linux* )
411 412 413
    opsys=gnu-linux
  ;;

414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436
  ## FreeBSD ports
  *-*-freebsd* )
    opsys=freebsd
  ;;

  ## FreeBSD kernel + glibc based userland
  *-*-kfreebsd*gnu* )
    opsys=gnu-kfreebsd
  ;;

  ## NetBSD ports
  *-*-netbsd* )
    opsys=netbsd
  ;;

  ## OpenBSD ports
  *-*-openbsd* )
    opsys=openbsd
  ;;

  ## Apple Darwin / Mac OS X
  *-apple-darwin* )
    case "${canonical}" in
Paul Eggert's avatar
Paul Eggert committed
437 438 439
      i[3456]86-* )  ;;
      powerpc-* )    ;;
      x86_64-* )     ;;
440 441 442
      * )            unported=yes ;;
    esac
    opsys=darwin
443 444 445 446 447 448
    ## Use fink packages if available.
    ## FIXME find a better way to do this: http://debbugs.gnu.org/11507
##    if test -d /sw/include && test -d /sw/lib; then
##      GCC_TEST_OPTIONS="-I/sw/include -L/sw/lib"
##      NON_GCC_TEST_OPTIONS=${GCC_TEST_OPTIONS}
##    fi
449 450 451 452
  ;;

  ## HP 9000 series 700 and 800, running HP/UX
  hppa*-hp-hpux10.2* )
453
    opsys=hpux10-20
454 455
  ;;
  hppa*-hp-hpux1[1-9]* )
456
    opsys=hpux11
457 458 459 460 461
    CFLAGS="-D_INCLUDE__STDC_A1_SOURCE $CFLAGS"
  ;;

  ## IBM machines
  rs6000-ibm-aix4.[23]* )
Paul Eggert's avatar
Paul Eggert committed
462
    opsys=aix4-2
463 464
  ;;
  powerpc-ibm-aix4.[23]*  )
Paul Eggert's avatar
Paul Eggert committed
465
    opsys=aix4-2
466 467
  ;;
  rs6000-ibm-aix[56]* )
Paul Eggert's avatar
Paul Eggert committed
468
    opsys=aix4-2
469 470
  ;;
  powerpc-ibm-aix[56]*  )
Paul Eggert's avatar
Paul Eggert committed
471
    opsys=aix4-2
472 473 474 475 476
  ;;

  ## Silicon Graphics machines
  ## Iris 4D
  mips-sgi-irix6.5 )
477
    opsys=irix6-5
478 479 480 481 482 483 484 485 486 487 488
    # Without defining _LANGUAGE_C, things get masked out in the headers
    # so that, for instance, grepping for `free' in stdlib.h fails and
    # AC_HEADER_STD_C fails.   (MIPSPro 7.2.1.2m compilers, Irix 6.5.3m).
    NON_GCC_TEST_OPTIONS="-D_LANGUAGE_C"
  ;;

  ## Suns
  *-sun-solaris* \
    | i[3456]86-*-solaris2* | i[3456]86-*-sunos5* \
    | x86_64-*-solaris2*    | x86_64-*-sunos5*)
    case "${canonical}" in
Paul Eggert's avatar
Paul Eggert committed
489 490 491
      i[3456]86-*-* )   ;;
      amd64-*-*|x86_64-*-*) ;;
      sparc* )		;;
492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524
      * )		unported=yes ;;
    esac
    case "${canonical}" in
      *-sunos5.6* | *-solaris2.6* )
		opsys=sol2-6
		RANLIB="ar -ts"
		;;
      *-sunos5.[7-9]* | *-solaris2.[7-9]* )
		opsys=sol2-6
		emacs_check_sunpro_c=yes
		;;
      *-sunos5* | *-solaris* )
		opsys=sol2-10
		emacs_check_sunpro_c=yes
		;;
    esac
    ## Watch out for a compiler that we know will not work.
    case "${canonical}" in
     *-solaris* | *-sunos5* )
		if [ "x$CC" = x/usr/ucb/cc ]; then
		  ## /usr/ucb/cc doesn't work;
		  ## we should find some other compiler that does work.
		  unset CC
		fi
		;;
      *) ;;
    esac
  ;;

  ## Intel 386 machines where we don't care about the manufacturer.
  i[3456]86-*-* )
    case "${canonical}" in
      *-cygwin )                opsys=cygwin ;;
525
      *-darwin* )               opsys=darwin ;;
526 527 528
      *-sysv4.2uw* )	  	opsys=unixware ;;
      *-sysv5uw* )	  	opsys=unixware ;;
      *-sysv5OpenUNIX* )  	opsys=unixware ;;
529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562
      ## Otherwise, we'll fall through to the generic opsys code at the bottom.
    esac
  ;;

  * )
    unported=yes
  ;;
esac

### If the code above didn't choose an operating system, just choose
### an operating system based on the configuration name.  You really
### only want to use this when you have no idea what the right
### operating system is; if you know what operating systems a machine
### runs, it's cleaner to make it explicit in the case statement
### above.
if test x"${opsys}" = x; then
  case "${canonical}" in
    *-gnu* )				opsys=gnu ;;
    * )
      unported=yes
    ;;
  esac
fi

]
dnl quotation ends

if test $unported = yes; then
  AC_MSG_ERROR([Emacs hasn't been ported to `${canonical}' systems.
Check `etc/MACHINES' for recognized configuration names.])
fi


#### Choose a compiler.
563

564 565
dnl Sets GCC=yes if using gcc.
AC_PROG_CC
Paul Eggert's avatar
Paul Eggert committed
566 567
AM_PROG_CC_C_O

568 569 570 571 572 573
if test x$GCC = xyes; then
  test "x$GCC_TEST_OPTIONS" != x && CC="$CC $GCC_TEST_OPTIONS"
else
  test "x$NON_GCC_TEST_OPTIONS" != x && CC="$CC $NON_GCC_TEST_OPTIONS"
fi

574 575 576
# Initialize gnulib right after choosing the compiler.
gl_EARLY

577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604
# It's helpful to have C macros available to GDB, so prefer -g3 to -g
# if -g3 works and the user does not specify CFLAGS.
# This test must follow gl_EARLY; otherwise AC_LINK_IFELSE complains.
if test "$ac_test_CFLAGS" != set; then
  case $CFLAGS in
    '-g')
      emacs_g3_CFLAGS='-g3';;
    '-g -O2')
      emacs_g3_CFLAGS='-g3 -O2';;
    *)
      emacs_g3_CFLAGS='';;
  esac
  if test -n "$emacs_g3_CFLAGS"; then
    emacs_save_CFLAGS=$CFLAGS
    CFLAGS=$emacs_g3_CFLAGS
    AC_CACHE_CHECK([whether $CC accepts $emacs_g3_CFLAGS],
      [emacs_cv_prog_cc_g3],
      [AC_LINK_IFELSE([AC_LANG_PROGRAM()],
	 [emacs_cv_prog_cc_g3=yes],
         [emacs_cv_prog_cc_g3=no])])
    if test $emacs_cv_prog_cc_g3 = yes; then
      CFLAGS=$emacs_g3_CFLAGS
    else
      CFLAGS=$emacs_save_CFLAGS
    fi
  fi
fi

605 606
AC_ARG_ENABLE([gcc-warnings],
  [AS_HELP_STRING([--enable-gcc-warnings],
607 608 609
                  [turn on lots of GCC warnings. This is intended for
		   developers, and may generate false alarms when used
		   with older or non-GNU development tools.])],
610 611 612 613 614 615 616 617
  [case $enableval in
     yes|no) ;;
     *)      AC_MSG_ERROR([bad value $enableval for gcc-warnings option]) ;;
   esac
   gl_gcc_warnings=$enableval],
  [gl_gcc_warnings=no]
)

618 619 620 621 622 623 624 625 626 627 628 629 630
AC_ARG_ENABLE(link-time-optimization,
[AS_HELP_STRING([--enable-link-time-optimization],
                [build emacs with link-time optimization.
                 This is supported only for GCC since 4.5.0.])],
if test "${enableval}" != "no"; then
   AC_MSG_CHECKING([whether link-time optimization is supported])
   ac_lto_supported=no
   if test x$GCC = xyes; then
      CPUS=`getconf _NPROCESSORS_ONLN 2>/dev/null`
      if test x$CPUS != x; then
      	 LTO="-flto=$CPUS"
      else
	 LTO="-flto"
631
      fi
632 633 634 635 636 637 638 639 640 641 642 643
      old_CFLAGS=$CFLAGS
      CFLAGS="$CFLAGS $LTO"
      AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[]])],
      	[ac_lto_supported=yes], [ac_lto_supported=no])
      CFLAGS="$old_CFLAGS"
   fi
   AC_MSG_RESULT([$ac_lto_supported])
   if test "$ac_lto_supported" = "yes"; then
      CFLAGS="$CFLAGS $LTO"
   fi
fi)

644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683
# gl_GCC_VERSION_IFELSE([major], [minor], [run-if-found], [run-if-not-found])
# ------------------------------------------------
# If $CPP is gcc-MAJOR.MINOR or newer, then run RUN-IF-FOUND.
# Otherwise, run RUN-IF-NOT-FOUND.
AC_DEFUN([gl_GCC_VERSION_IFELSE],
  [AC_PREPROC_IFELSE(
    [AC_LANG_PROGRAM(
      [[
#if ($1) < __GNUC__ || (($1) == __GNUC__ && ($2) <= __GNUC_MINOR__)
/* ok */
#else
# error "your version of gcc is older than $1.$2"
#endif
      ]]),
    ], [$3], [$4])
  ]
)

# When compiling with GCC, prefer -isystem to -I when including system
# include files, to avoid generating useless diagnostics for the files.
if test "$gl_gcc_warnings" != yes; then
  isystem='-I'
else
  isystem='-isystem '

  # This, $nw, is the list of warnings we disable.
  nw=

  case $with_x_toolkit in
    lucid | athena | motif)
       # Old toolkits mishandle 'const'.
       nw="$nw -Wwrite-strings"
       ;;
    *)
       gl_WARN_ADD([-Werror], [WERROR_CFLAGS])
       ;;
  esac
  AC_SUBST([WERROR_CFLAGS])

  nw="$nw -Waggregate-return"       # anachronistic
684
  nw="$nw -Wlong-long"              # C90 is anachronistic
685 686 687 688 689 690 691 692 693
  nw="$nw -Wc++-compat"             # We don't care about C++ compilers
  nw="$nw -Wundef"                  # Warns on '#if GNULIB_FOO' etc in gnulib
  nw="$nw -Wtraditional"            # Warns on #elif which we use often
  nw="$nw -Wcast-qual"              # Too many warnings for now
  nw="$nw -Wconversion"             # Too many warnings for now
  nw="$nw -Wsystem-headers"         # Don't let system headers trigger warnings
  nw="$nw -Wsign-conversion"        # Too many warnings for now
  nw="$nw -Woverlength-strings"     # Not a problem these days
  nw="$nw -Wtraditional-conversion" # Too many warnings for now
694
  nw="$nw -Wunreachable-code"       # so buggy that it's now silently ignored
695
  nw="$nw -Wpadded"                 # Our structs are not padded
696
  nw="$nw -Wredundant-decls"        # we regularly (re)declare functions
697
  nw="$nw -Wlogical-op"             # any use of fwrite provokes this
698
  nw="$nw -Wformat-nonliteral"      # we do this a lot
699 700 701 702
  nw="$nw -Wvla"                    # warnings in gettext.h
  nw="$nw -Wnested-externs"         # use of XARGMATCH/verify_function__
  nw="$nw -Wswitch-enum"            # Too many warnings for now
  nw="$nw -Wswitch-default"         # Too many warnings for now
703 704
  nw="$nw -Wfloat-equal"            # warns about high-quality code
  nw="$nw -Winline"                 # OK to ignore 'inline'
705
  nw="$nw -Wjump-misses-init"       # We sometimes safely jump over init.
706 707
  nw="$nw -Wsync-nand"              # irrelevant here, and provokes ObjC warning
  nw="$nw -Wunsafe-loop-optimizations" # OK to suppress unsafe optimizations
708 709 710 711 712 713

  # Emacs doesn't care about shadowing; see
  # <http://lists.gnu.org/archive/html/emacs-diffs/2011-11/msg00265.html>.
  nw="$nw -Wshadow"

  # The following lines should be removable at some point.
714 715
  nw="$nw -Wstack-protector"
  nw="$nw -Wstrict-overflow"
716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737
  nw="$nw -Wsuggest-attribute=pure"

  gl_MANYWARN_ALL_GCC([ws])
  gl_MANYWARN_COMPLEMENT([ws], [$ws], [$nw])
  for w in $ws; do
    gl_WARN_ADD([$w])
  done
  gl_WARN_ADD([-Wno-missing-field-initializers]) # We need this one
  gl_WARN_ADD([-Wno-sign-compare])     # Too many warnings for now
  gl_WARN_ADD([-Wno-type-limits])      # Too many warnings for now
  gl_WARN_ADD([-Wno-switch])           # Too many warnings for now
  gl_WARN_ADD([-Wno-unused-parameter]) # Too many warnings for now
  gl_WARN_ADD([-Wno-format-nonliteral])

  # In spite of excluding -Wlogical-op above, it is enabled, as of
  # gcc 4.5.0 20090517.
  gl_WARN_ADD([-Wno-logical-op])

  gl_WARN_ADD([-fdiagnostics-show-option])
  gl_WARN_ADD([-funit-at-a-time])

  AC_DEFINE([lint], [1], [Define to 1 if the compiler is checking for lint.])
738 739 740 741 742 743 744
  AH_VERBATIM([FORTIFY_SOURCE],
  [/* Enable compile-time and run-time bounds-checking, and some warnings,
      without upsetting glibc 2.15+. */
   #if defined __OPTIMIZE__ && __OPTIMIZE__
   # define _FORTIFY_SOURCE 2
   #endif
  ])
745 746 747 748 749 750 751 752 753
  AC_DEFINE([GNULIB_PORTCHECK], [1], [enable some gnulib portability checks])

  # We use a slightly smaller set of warning options for lib/.
  # Remove the following and save the result in GNULIB_WARN_CFLAGS.
  nw=
  nw="$nw -Wunused-macros"

  gl_MANYWARN_COMPLEMENT([GNULIB_WARN_CFLAGS], [$WARN_CFLAGS], [$nw])
  AC_SUBST([GNULIB_WARN_CFLAGS])
754 755 756 757
fi



758 759 760 761 762 763 764
dnl Some other nice autoconf tests.
dnl These are commented out, since gl_EARLY and/or Autoconf already does them.
dnl AC_PROG_INSTALL
dnl AC_PROG_MKDIR_P
dnl if test "x$RANLIB" = x; then
dnl   AC_PROG_RANLIB
dnl fi
765
AC_PROG_LN_S
766

767 768
AC_PATH_PROG(INSTALL_INFO, install-info, :,
  $PATH$PATH_SEPARATOR/usr/sbin$PATH_SEPARATOR/sbin)
769 770 771
dnl Don't use GZIP, which is used by gzip for additional parameters.
AC_PATH_PROG(GZIP_PROG, gzip)

772 773 774
if test $opsys = gnu-linux; then
  AC_PATH_PROG(PAXCTL, paxctl,,
    [$PATH$PATH_SEPARATOR/sbin$PATH_SEPARATOR/usr/sbin])
775 776 777 778 779 780
  if test "X$PAXCTL" != X; then
    AC_MSG_CHECKING([whether binaries have a PT_PAX_FLAGS header])
    AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])],
      [if $PAXCTL -v conftest$EXEEXT >/dev/null 2>&1; then AC_MSG_RESULT(yes)
      else AC_MSG_RESULT(no); PAXCTL=""; fi])
  fi
781
fi
782

783
## Need makeinfo >= 4.7 (?) to build the manuals.
784 785 786 787
AC_PATH_PROG(MAKEINFO, makeinfo, no)
dnl By this stage, configure has already checked for egrep and set EGREP,
dnl or exited with an error if no egrep was found.
if test "$MAKEINFO" != "no" && \
788
  test x"`$MAKEINFO --version 2> /dev/null | $EGREP 'texinfo[[^0-9]]*([[1-4]][[0-9]]+|[[5-9]]|4\.[[7-9]]|4\.[[1-6]][[0-9]]+)'`" = x; then
789 790 791 792 793 794 795 796 797 798 799 800
   MAKEINFO=no
fi

## Makeinfo is unusual.  For a released Emacs, the manuals are
## pre-built, and not deleted by the normal clean rules.  makeinfo is
## therefore in the category of "special tools" not normally required, which
## configure does not have to check for (eg autoconf itself).
## In a Bazaar checkout on the other hand, the manuals are not included.
## So makeinfo is a requirement to build from Bazaar, and configure
## should test for it as it does for any other build requirement.
## We use the presence of $srcdir/info/emacs to distinguish a release,
## with pre-built manuals, from a Bazaar checkout.
801 802
HAVE_MAKEINFO=yes

803
if test "$MAKEINFO" = "no"; then
804
  MAKEINFO=makeinfo
805
  if test "x${with_makeinfo}" = "xno"; then
806
    HAVE_MAKEINFO=no
807
  elif test ! -e $srcdir/info/emacs; then
808
    AC_MSG_ERROR( [You do not seem to have makeinfo >= 4.7, and your
809 810 811 812 813
source tree does not seem to have pre-built manuals in the `info' directory.
Either install a suitable version of makeinfo, or re-run configure
with the `--without-makeinfo' option to build without the manuals.] )
  fi
fi
814
AC_SUBST(HAVE_MAKEINFO)
815

816 817 818 819 820 821
dnl Just so that there is only a single place we need to edit.
INFO_EXT=.info
INFO_OPTS=--no-split
AC_SUBST(INFO_EXT)
AC_SUBST(INFO_OPTS)

822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853
dnl Add our options to ac_link now, after it is set up.

if test x$GCC = xyes; then
  test "x$GCC_LINK_TEST_OPTIONS" != x && \
    ac_link="$ac_link $GCC_LINK_TEST_OPTIONS"
else
  test "x$NON_GCC_LINK_TEST_OPTIONS" != x && \
    ac_link="$ac_link $NON_GCC_LINK_TEST_OPTIONS"
fi

dnl We need -znocombreloc if we're using a relatively recent GNU ld.
dnl If we can link with the flag, it shouldn't do any harm anyhow.
dnl (Don't use `-z nocombreloc' as -z takes no arg on Irix.)
dnl Treat GCC specially since it just gives a non-fatal `unrecognized option'
dnl if not built to support GNU ld.

late_LDFLAGS=$LDFLAGS
if test x$GCC = xyes; then
  LDFLAGS="$LDFLAGS -Wl,-znocombreloc"
else
  LDFLAGS="$LDFLAGS -znocombreloc"
fi

AC_MSG_CHECKING([for -znocombreloc])
AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])],
  [AC_MSG_RESULT(yes)],
  LDFLAGS=$late_LDFLAGS
  [AC_MSG_RESULT(no)])


dnl The function dump-emacs will not be defined and temacs will do
dnl (load "loadup") automatically unless told otherwise.
854
test "x$CANNOT_DUMP" = "x" && CANNOT_DUMP=no
855
case "$opsys" in
856
  your-opsys-here) CANNOT_DUMP=yes ;;
857
esac
858 859 860 861

test "$CANNOT_DUMP" = "yes" && \
  AC_DEFINE(CANNOT_DUMP, 1, [Define if Emacs cannot be dumped on your system.])

862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885
AC_SUBST(CANNOT_DUMP)


UNEXEC_OBJ=unexelf.o
case "$opsys" in
  # MSDOS uses unexcoff.o
  # MSWindows uses unexw32.o
  aix4-2)
   UNEXEC_OBJ=unexaix.o
   ;;
  cygwin)
   UNEXEC_OBJ=unexcw.o
   ;;
  darwin)
   UNEXEC_OBJ=unexmacosx.o
   ;;
  hpux10-20 | hpux11)
   UNEXEC_OBJ=unexhp9k800.o
   ;;
  sol2-10)
   # Use the Solaris dldump() function, called from unexsol.c, to dump
   # emacs, instead of the generic ELF dump code found in unexelf.c.
   # The resulting binary has a complete symbol table, and is better
   # for debugging and other observability tools (debuggers, pstack, etc).
Paul Eggert's avatar
Paul Eggert committed
886
   #
887 888 889
   # If you encounter a problem using dldump(), please consider sending
   # a message to the OpenSolaris tools-linking mailing list:
   #      http://mail.opensolaris.org/mailman/listinfo/tools-linking
Paul Eggert's avatar
Paul Eggert committed
890
   #
891 892 893 894 895 896 897 898 899 900 901 902
   # It is likely that dldump() works with older Solaris too, but this has
   # not been tested, so for now this change is for Solaris 10 or newer.
   UNEXEC_OBJ=unexsol.o
   ;;
esac

LD_SWITCH_SYSTEM=
case "$opsys" in
  freebsd)
   ## Let `ld' find image libs and similar things in /usr/local/lib.
   ## The system compiler, GCC, has apparently been modified to not
   ## look there, contrary to what a stock GCC would do.
903 904 905
### It's not our place to do this.  See bug#10313#17.
###   LD_SWITCH_SYSTEM=-L/usr/local/lib
      :
906 907 908 909
   ;;

  gnu-linux)
   ## cpp test was "ifdef __mips__", but presumably this is equivalent...
910
   case $host_cpu in mips*) LD_SWITCH_SYSTEM="-G 0";; esac
911 912 913
   ;;

  netbsd)
914 915 916
### It's not our place to do this.  See bug#10313#17.
###   LD_SWITCH_SYSTEM="-Wl,-rpath,/usr/pkg/lib -L/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/local/lib"
      :
917 918 919 920 921 922 923 924 925 926 927 928
   ;;

  openbsd)
   ## Han Boetes <han@mijncomputer.nl> says this is necessary,
   ## otherwise Emacs dumps core on elf systems.
   LD_SWITCH_SYSTEM="-Z"
   ;;
esac
AC_SUBST(LD_SWITCH_SYSTEM)

ac_link="$ac_link $LD_SWITCH_SYSTEM"

929
## This setting of LD_SWITCH_SYSTEM references LD_SWITCH_X_SITE_RPATH,
930 931 932 933 934 935 936 937 938 939 940
## which has not been defined yet.  When this was handled with cpp,
## it was expanded to null when configure sourced the s/*.h file.
## Thus LD_SWITCH_SYSTEM had different values in configure and the Makefiles.
## FIXME it would be cleaner to put this in LD_SWITCH_SYSTEM_TEMACS
## (or somesuch), but because it is supposed to go at the _front_
## of LD_SWITCH_SYSTEM, we cannot do that in exactly the same way.
## Compare with the gnu-linux case below, which added to the end
## of LD_SWITCH_SYSTEM, and so can instead go at the front of
## LD_SWITCH_SYSTEM_TEMACS.
case "$opsys" in
  netbsd|openbsd)
941
   LD_SWITCH_SYSTEM="\$(LD_SWITCH_X_SITE_RPATH) $LD_SWITCH_SYSTEM" ;;
942 943 944 945
esac


C_SWITCH_MACHINE=
Paul Eggert's avatar
Paul Eggert committed
946 947
case $canonical in
 alpha*)
948 949 950 951 952 953 954 955 956 957 958 959 960
  AC_CHECK_DECL([__ELF__])
  if test "$ac_cv_have_decl___ELF__" = "yes"; then
    ## With ELF, make sure that all common symbols get allocated to in the
    ## data section.  Otherwise, the dump of temacs may miss variables in
    ## the shared library that have been initialized.  For example, with
    ## GNU libc, __malloc_initialized would normally be resolved to the
    ## shared library's .bss section, which is fatal.
    if test "x$GCC" = "xyes"; then
      C_SWITCH_MACHINE="-fno-common"
    else
      AC_MSG_ERROR([What gives?  Fix me if DEC Unix supports ELF now.])
    fi
  else
Paul Eggert's avatar
Paul Eggert committed
961
    UNEXEC_OBJ=unexalpha.o
962
  fi
Paul Eggert's avatar
Paul Eggert committed
963 964
  ;;
esac
965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988
AC_SUBST(C_SWITCH_MACHINE)

AC_SUBST(UNEXEC_OBJ)

C_SWITCH_SYSTEM=
## Some programs in src produce warnings saying certain subprograms
## are too complex and need a MAXMEM value greater than 2000 for
## additional optimization.  --nils@exp-math.uni-essen.de
test "$opsys" = "aix4.2" && test "x$GCC" != "xyes" && \
  C_SWITCH_SYSTEM="-ma -qmaxmem=4000"
## gnu-linux might need -D_BSD_SOURCE on old libc5 systems.
## It is redundant in glibc2, since we define _GNU_SOURCE.
AC_SUBST(C_SWITCH_SYSTEM)


LIBS_SYSTEM=
case "$opsys" in
  ## IBM's X11R5 uses -lIM and -liconv in AIX 3.2.2.
  aix4-2) LIBS_SYSTEM="-lrts -lIM -liconv" ;;

  freebsd) LIBS_SYSTEM="-lutil" ;;

  hpux*) LIBS_SYSTEM="-l:libdld.sl" ;;

989
  sol2*) LIBS_SYSTEM="-lsocket -lnsl" ;;
990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004

  ## Motif needs -lgen.
  unixware) LIBS_SYSTEM="-lsocket -lnsl -lelf -lgen" ;;
esac
AC_SUBST(LIBS_SYSTEM)


### Make sure subsequent tests use flags consistent with the build flags.

if test x"${OVERRIDE_CPPFLAGS}" != x; then
  CPPFLAGS="${OVERRIDE_CPPFLAGS}"
else
  CPPFLAGS="$C_SWITCH_SYSTEM $C_SWITCH_MACHINE $CPPFLAGS"
fi

1005 1006
# Suppress obsolescent Autoconf test for size_t; Emacs assumes C89 or better.
AC_DEFUN([AC_TYPE_SIZE_T])
1007 1008
# Likewise for obsolescent test for uid_t, gid_t; Emacs assumes them.
AC_DEFUN([AC_TYPE_UID_T])
1009

1010 1011 1012 1013

LIB_MATH=-lm
LIB_STANDARD=
START_FILES=
1014 1015 1016 1017
dnl Current possibilities handled by sed (aix4-2 -> aix,
dnl gnu-linux -> gnu/linux, etc.):
dnl gnu, gnu/linux, gnu/kfreebsd, aix, cygwin, darwin, hpux, irix.
dnl And special cases: berkeley-unix, usg-unix-v, ms-dos, windows-nt.
1018
SYSTEM_TYPE=`echo $opsys | sed -e 's/[[0-9]].*//' -e 's|-|/|'`
1019

1020
dnl NB do not use CRT_DIR unquoted here, since it might not be set yet.
1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031
case $opsys in
  cygwin )
    LIB_MATH=
    START_FILES='pre-crt0.o'
    ;;
  darwin )
    ## Adding -lm confuses the dynamic linker, so omit it.
    LIB_MATH=
    START_FILES='pre-crt0.o'
    ;;
  freebsd )
1032 1033
    LIB_STANDARD='-lgcc -lc -lgcc $(CRT_DIR)/crtn.o'
    START_FILES='pre-crt0.o $(CRT_DIR)/crt1.o $(CRT_DIR)/crti.o'
1034
    SYSTEM_TYPE=berkeley-unix
1035 1036 1037 1038 1039 1040 1041 1042 1043
    ;;
  gnu-linux | gnu-kfreebsd )
    LIB_STANDARD='-lgcc -lc -lgcc $(CRT_DIR)/crtn.o'
    START_FILES='pre-crt0.o $(CRT_DIR)/crt1.o $(CRT_DIR)/crti.o'
    ;;
  hpux10-20 | hpux11 )
    LIB_STANDARD=-lc
    START_FILES='pre-crt0.o $(CRT_DIR)/crt0.o'
    ;;
1044
  dnl NB this may be adjusted below.
1045
  netbsd | openbsd )
1046 1047
    LIB_STANDARD='-lgcc -lc -lgcc $(CRT_DIR)/crtend.o'
    START_FILES='pre-crt0.o $(CRT_DIR)/crt0.o $(CRT_DIR)/crtbegin.o'
1048
    SYSTEM_TYPE=berkeley-unix
1049
    ;;
1050 1051 1052 1053 1054

  sol2* | unixware )
    SYSTEM_TYPE=usg-unix-v
    ;;

1055 1056 1057 1058
esac

AC_SUBST(LIB_MATH)
AC_SUBST(START_FILES)
1059 1060
AC_DEFINE_UNQUOTED(SYSTEM_TYPE, "$SYSTEM_TYPE",
  [The type of system you are compiling for; sets `system-type'.])
1061

1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073
dnl Not all platforms use crtn.o files.  Check if the current one does.
crt_files=

for file in x $LIB_STANDARD $START_FILES; do
  case "$file" in
    *CRT_DIR*) crt_files="$crt_files `echo $file | sed -e 's|.*/||'`" ;;
  esac
done

if test "x$crt_files" != x; then

  ## If user specified a crt-dir, use that unconditionally.
1074 1075
  crt_gcc=no

1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098
  if test "X$CRT_DIR" = "X"; then

    CRT_DIR=/usr/lib            # default

    case "$canonical" in
      x86_64-*-linux-gnu* | s390x-*-linux-gnu*)
      ## On x86-64 and s390x GNU/Linux distributions, the standard library
      ## can be in a variety of places.  We only try /usr/lib64 and /usr/lib.
      ## For anything else (eg /usr/lib32), it is up the user to specify
      ## the location (bug#5655).
      ## Test for crtn.o, not just the directory, because sometimes the
      ## directory exists but does not have the relevant files (bug#1287).
      ## FIXME better to test for binary compatibility somehow.
      test -e /usr/lib64/crtn.o && CRT_DIR=/usr/lib64
      ;;

      powerpc64-*-linux-gnu* | sparc64-*-linux-gnu*) CRT_DIR=/usr/lib64 ;;
    esac

    case "$opsys" in
      hpux10-20) CRT_DIR=/lib ;;
    esac

1099 1100
    test "x${GCC}" = xyes && crt_gcc=yes

1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119
  fi                            # CRT_DIR = ""

  crt_missing=

  for file in $crt_files; do

    ## If we're using gcc, try to determine it automatically by asking
    ## gcc.  [If this doesn't work, CRT_DIR will remain at the
    ## system-dependent default from above.]
    if test $crt_gcc = yes && test ! -e $CRT_DIR/$file; then

       crt_file=`$CC --print-file-name=$file 2>/dev/null`
       case "$crt_file" in
         */*)
           CRT_DIR=`AS_DIRNAME(["$crt_file"])`
           ;;
       esac
    fi

1120 1121 1122 1123
    dnl We expect all the files to be in a single directory, so after the
    dnl first there is no point asking gcc.
    crt_gcc=no

Paul Eggert's avatar
Paul Eggert committed
1124
    test -e $CRT_DIR/$file || crt_missing="$crt_missing $file"
1125 1126 1127 1128 1129 1130 1131 1132 1133 1134
  done                          # $crt_files

  test "x$crt_missing" = x || \
    AC_MSG_ERROR([Required file(s) not found:$crt_missing
Try using the --with-crt-dir option.])

fi                              # crt_files != ""

AC_SUBST(CRT_DIR)

1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147
case $opsys in
  netbsd | openbsd )
    if test -f $CRT_DIR/crti.o; then

        test -f $CRT_DIR/crtn.o || \
          AC_MSG_ERROR([Required file not found: crtn.o])

        LIB_STANDARD='-lgcc -lc -lgcc $(CRT_DIR)/crtend.o $(CRT_DIR)/crtn.o'
        START_FILES='pre-crt0.o $(CRT_DIR)/crt0.o $(CRT_DIR)/crti.o $(CRT_DIR)/crtbegin.o'
    fi
    ;;
esac

1148

1149 1150
pre_PKG_CONFIG_CFLAGS=$CFLAGS
pre_PKG_CONFIG_LIBS=$LIBS
1151

1152 1153
AC_PATH_PROG(PKG_CONFIG, pkg-config, no)

1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168
dnl This function definition taken from Gnome 2.0
dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
dnl also defines GSTUFF_PKG_ERRORS on error
AC_DEFUN([PKG_CHECK_MODULES], [
  succeeded=no

  if test "$PKG_CONFIG" = "no" ; then
     ifelse([$4], , [AC_MSG_ERROR([
      *** The pkg-config script could not be found. Make sure it is in your path, or give the full path to pkg-config with the PKG_CONFIG environment variable or --with-pkg-config-prog.  Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.])], [$4])
  else
     PKG_CONFIG_MIN_VERSION=0.9.0
     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
        AC_MSG_CHECKING(for $2)

1169 1170 1171
        if $PKG_CONFIG --exists "$2" 2>&AS_MESSAGE_LOG_FD &&
	   $1_CFLAGS=`$PKG_CONFIG --cflags "$2" 2>&AS_MESSAGE_LOG_FD` &&
	   $1_LIBS=`$PKG_CONFIG --libs "$2" 2>&AS_MESSAGE_LOG_FD`; then
1172 1173 1174 1175 1176 1177 1178
	    edit_cflags="
	      s,///*,/,g
	      s/^/ /
	      s/ -I/ $isystem/g
	      s/^ //
	    "
	    $1_CFLAGS=`AS_ECHO(["$$1_CFLAGS"]) | sed -e "$edit_cflags"`
1179 1180 1181
	    $1_LIBS=`AS_ECHO(["$$1_LIBS"]) | sed -e 's,///*,/,g'`
            AC_MSG_RESULT([yes CFLAGS='$$1_CFLAGS' LIBS='$$1_LIBS'])
            succeeded=yes
1182 1183 1184 1185 1186
        else
            AC_MSG_RESULT(no)
            $1_CFLAGS=""
            $1_LIBS=""
            ## If we have a custom action on failure, don't print errors, but
1187 1188 1189 1190
	    ## do set a variable so people can do so.  Do it in a subshell
	    ## to capture any diagnostics in invoking pkg-config.
	    $1_PKG_ERRORS=`($PKG_CONFIG --print-errors "$2") 2>&1`
	    ifelse([$4], ,echo "$$1_PKG_ERRORS",)
1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210
        fi

        AC_SUBST($1_CFLAGS)
        AC_SUBST($1_LIBS)
     else
        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
        echo "*** See http://www.freedesktop.org/software/pkgconfig"
     fi
  fi

  if test $succeeded = yes; then
     ifelse([$3], , :, [$3])
  else
     ifelse([$4], , [AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.])], [$4])
  fi
])


if test "${with_sound}" != "no"; then
  # Sound support for GNU/Linux and the free BSDs.
Paul Eggert's avatar
Paul Eggert committed
1211
  AC_CHECK_HEADERS(machine/soundcard.h sys/soundcard.h soundcard.h,
1212 1213 1214 1215 1216 1217 1218 1219 1220 1221
    have_sound_header=yes)
  # Emulation library used on NetBSD.
  AC_CHECK_LIB(ossaudio, _oss_ioctl, LIBSOUND=-lossaudio, LIBSOUND=)
  AC_SUBST(LIBSOUND)

  ALSA_REQUIRED=1.0.0
  ALSA_MODULES="alsa >= $ALSA_REQUIRED"
  PKG_CHECK_MODULES(ALSA, $ALSA_MODULES, HAVE_ALSA=yes, HAVE_ALSA=no)
  if test $HAVE_ALSA = yes; then
    SAVE_CFLAGS="$CFLAGS"
1222
    SAVE_LIBS="$LIBS"
1223
    CFLAGS="$ALSA_CFLAGS $CFLAGS"
1224
    LIBS="$ALSA_LIBS $LIBS"
1225
    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <asoundlib.h>]], [[snd_lib_error_set_handler (0);]])],
1226 1227 1228
                    emacs_alsa_normal=yes,
	            emacs_alsa_normal=no)
    if test "$emacs_alsa_normal" != yes; then
1229 1230
      AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <alsa/asoundlib.h>]],
                     [[snd_lib_error_set_handler (0);]])],
1231 1232 1233 1234 1235 1236 1237 1238 1239
                     emacs_alsa_subdir=yes,
	             emacs_alsa_subdir=no)
      if test "$emacs_alsa_subdir" != yes; then
        AC_MSG_ERROR([pkg-config found alsa, but it does not compile.  See config.log for error messages.])
      fi
      ALSA_CFLAGS="$ALSA_CFLAGS -DALSA_SUBDIR_INCLUDE"
    fi

    CFLAGS="$SAVE_CFLAGS"
1240
    LIBS="$SAVE_LIBS"
1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261
    LIBSOUND="$LIBSOUND $ALSA_LIBS"
    CFLAGS_SOUND="$CFLAGS_SOUND $ALSA_CFLAGS"
    AC_DEFINE(HAVE_ALSA, 1, [Define to 1 if ALSA is available.])
  fi

  dnl Define HAVE_SOUND if we have sound support.  We know it works and
  dnl compiles only on the specified platforms.  For others, it
  dnl probably doesn't make sense to try.
  if test x$have_sound_header = xyes || test $HAVE_ALSA = yes; then
     case "$opsys" in
       dnl defined __FreeBSD__ || defined __NetBSD__ || defined __linux__
       gnu-linux|freebsd|netbsd)
         AC_DEFINE(HAVE_SOUND, 1, [Define to 1 if you have sound support.])
         ;;
     esac
  fi

  AC_SUBST(CFLAGS_SOUND)
fi

dnl checks for header files
1262 1263 1264 1265
AC_CHECK_HEADERS_ONCE(
  linux/version.h sys/systeminfo.h
  stdio_ext.h fcntl.h coff.h pty.h
  sys/vlimit.h sys/resource.h
1266 1267 1268
  sys/utsname.h pwd.h utmp.h dirent.h util.h)

AC_MSG_CHECKING(if personality LINUX32 can be set)
1269
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/personality.h>]], [[personality (PER_LINUX32)]])],
1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295
               emacs_cv_personality_linux32=yes,
	       emacs_cv_personality_linux32=no)
AC_MSG_RESULT($emacs_cv_personality_linux32)

if test $emacs_cv_personality_linux32 = yes; then
  AC_DEFINE(HAVE_PERSONALITY_LINUX32, 1,
            [Define to 1 if personality LINUX32 can be set.])
fi

dnl On Solaris 8 there's a compilation warning for term.h because
dnl it doesn't define `bool'.
AC_CHECK_HEADERS(term.h, , , -)
AC_HEADER_TIME
AC_CHECK_DECLS([sys_siglist])
if test $ac_cv_have_decl_sys_siglist != yes; then
  # For Tru64, at least:
  AC_CHECK_DECLS([__sys_siglist])
  if test $ac_cv_have_decl___sys_siglist = yes; then
    AC_DEFINE(sys_siglist, __sys_siglist,
              [Define to any substitute for sys_siglist.])
  fi
fi
AC_HEADER_SYS_WAIT

dnl Check for speed_t typedef.
AC_CACHE_CHECK(for speed_t, emacs_cv_speed_t,
1296
  [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <termios.h>]], [[speed_t x = 1;]])],
1297 1298 1299 1300 1301 1302
    emacs_cv_speed_t=yes, emacs_cv_speed_t=no)])
if test $emacs_cv_speed_t = yes; then
  AC_DEFINE(HAVE_SPEED_T, 1,
  	   [Define to 1 if `speed_t' is declared by <termios.h>.])
fi

1303
AC_CHECK_HEADERS_ONCE(sys/socket.h)
1304 1305 1306 1307
AC_CHECK_HEADERS(net/if.h, , , [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif])
1308 1309 1310 1311 1312 1313 1314 1315
AC_CHECK_HEADERS(ifaddrs.h, , , [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif])
AC_CHECK_HEADERS(net/if_dl.h, , , [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif])
1316 1317 1318 1319

dnl checks for structure members
AC_CHECK_MEMBERS([struct ifreq.ifr_flags, struct ifreq.ifr_hwaddr,
		  struct ifreq.ifr_netmask, struct ifreq.ifr_broadaddr,
1320 1321
		  struct ifreq.ifr_addr,
		  struct ifreq.ifr_addr.sa_len], , ,
1322 1323 1324 1325 1326 1327 1328 1329
		 [AC_INCLUDES_DEFAULT
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#if HAVE_NET_IF_H
#include <net/if.h>
#endif])

Paul Eggert's avatar
Paul Eggert committed
1330
dnl Check for endianness.
1331
dnl AC_C_BIGENDIAN is done by gnulib.
1332 1333

dnl check for Make feature
1334
dnl AC_PROG_MAKE_SET is done by Automake.
1335 1336 1337 1338 1339 1340 1341 1342

DEPFLAGS=
MKDEPDIR=":"
deps_frag=deps.mk
dnl check for GNU Make if we have GCC and autodepend is on.
if test "$GCC" = yes && test "$ac_enable_autodepend" = yes; then
   AC_MSG_CHECKING([whether we are using GNU Make])
   HAVE_GNU_MAKE=no
1343
   testval=`${MAKE-make} --version 2>/dev/null | grep 'GNU Make'`
1344 1345 1346 1347 1348 1349 1350 1351 1352
   if test "x$testval" != x; then
      HAVE_GNU_MAKE=yes
   else
      ac_enable_autodepend=no
   fi
   AC_MSG_RESULT([$HAVE_GNU_MAKE])
   if test $HAVE_GNU_MAKE = yes; then
      AC_MSG_CHECKING([whether gcc understands -MMD -MF])
      SAVE_CFLAGS="$CFLAGS"
1353
      CFLAGS="$CFLAGS -MMD -MF deps.d -MP"
1354
      AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[]])], , ac_enable_autodepend=no)
1355 1356 1357 1358 1359 1360
      CFLAGS="$SAVE_CFLAGS"
      test -f deps.d || ac_enable_autodepend=no
      rm -rf deps.d
      AC_MSG_RESULT([$ac_enable_autodepend])
   fi
   if test $ac_enable_autodepend = yes; then
1361
      DEPFLAGS='-MMD -MF ${DEPDIR}/$*.d -MP'
1362 1363
      ## MKDIR_P is documented (see AC_PROG_MKDIR_P) to be parallel-safe.
      MKDEPDIR='${MKDIR_P} ${DEPDIR}'
1364 1365 1366 1367 1368 1369 1370 1371 1372
      deps_frag=autodeps.mk
   fi
fi
deps_frag=$srcdir/src/$deps_frag
AC_SUBST(MKDEPDIR)
AC_SUBST(DEPFLAGS)
AC_SUBST_FILE(deps_frag)


1373 1374 1375 1376
lisp_frag=$srcdir/src/lisp.mk
AC_SUBST_FILE(lisp_frag)


1377 1378 1379 1380 1381
dnl checks for operating system services
AC_SYS_LONG_FILE_NAMES

#### Choose a window system.

1382 1383 1384 1385 1386 1387
## We leave window_system equal to none if
## we end up building without one.  Any new window system should
## set window_system to an appropriate value and add objects to
## window-system-specific substs.

window_system=none
1388
AC_PATH_X
1389
if test "$no_x" != yes; then
1390 1391 1392
  window_system=x11
fi

1393
LD_SWITCH_X_SITE_RPATH=
1394 1395 1396
if test "${x_libraries}" != NONE; then
  if test -n "${x_libraries}"; then
    LD_SWITCH_X_SITE=-L`echo ${x_libraries} | sed -e "s/:/ -L/g"`
1397
    LD_SWITCH_X_SITE_RPATH=-Wl,-rpath,`echo ${x_libraries} | sed -e "s/:/ -Wl,-rpath,/g"`
1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419
  fi
  x_default_search_path=""
  x_search_path=${x_libraries}
  if test -z "${x_search_path}"; then
    x_search_path=/usr/lib
  fi
  for x_library in `echo ${x_search_path}: | \
		    sed -e "s/:/ /g" -e p -e "s:/lib[[^ /]]* :/share :g"`; do
    x_search_path="\
${x_library}/X11/%L/%T/%N%C%S:\
${x_library}/X11/%l/%T/%N%C%S:\
${x_library}/X11/%T/%N%C%S:\
${x_library}/X11/%L/%T/%N%S:\
${x_library}/X11/%l/%T/%N%S:\
${x_library}/X11/%T/%N%S"
    if test x"${x_default_search_path}" = x; then
      x_default_search_path=${x_search_path}
    else
      x_default_search_path="${x_search_path}:${x_default_search_path}"
    fi
  done
fi
1420
AC_SUBST(LD_SWITCH_X_SITE_RPATH)
1421 1422

if test "${x_includes}" != NONE && test -n "${x_includes}"; then
1423
  C_SWITCH_X_SITE="$isystem"`echo ${x_includes} | sed -e "s/:/ $isystem/g"`
1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451
fi

if test x"${x_includes}" = x; then
  bitmapdir=/usr/include/X11/bitmaps
else
  # accumulate include directories that have X11 bitmap subdirectories
  bmd_acc="dummyval"
  for bmd in `echo ${x_includes} | sed -e "s/:/ /g"`; do
    if test -d "${bmd}/X11/bitmaps"; then
      bmd_acc="${bmd_acc}:${bmd}/X11/bitmaps"
    fi
    if test -d "${bmd}/bitmaps"; then
      bmd_acc="${bmd_acc}:${bmd}/bitmaps"
    fi
  done
  if test ${bmd_acc} != "dummyval"; then
    bitmapdir=`echo ${bmd_acc} | sed -e "s/^dummyval://"`
  fi
fi

HAVE_NS=no
NS_IMPL_COCOA=no
NS_IMPL_GNUSTEP=no
tmp_CPPFLAGS="$CPPFLAGS"
tmp_CFLAGS="$CFLAGS"
CPPFLAGS="$CPPFLAGS -x objective-c"
CFLAGS="$CFLAGS -x objective-c"
TEMACS_LDFLAGS2="\${LDFLAGS}"
1452
GNU_OBJC_CFLAGS=
1453 1454 1455 1456
if test "${with_ns}" != no; then
  if test "${opsys}" = darwin; then
     NS_IMPL_COCOA=yes
     ns_appdir=`pwd`/nextstep/Emacs.app
1457
     ns_appbindir=${ns_appdir}/Contents/MacOS
1458
     ns_appresdir=${ns_appdir}/Contents/Resources
1459
     ns_appsrc=Cocoa/Emacs.base
1460 1461 1462
  elif test -f $GNUSTEP_CONFIG_FILE; then
     NS_IMPL_GNUSTEP=yes
     ns_appdir=`pwd`/nextstep/Emacs.app
1463
     ns_appbindir=${ns_appdir}
1464
     ns_appresdir=${ns_appdir}/Resources
1465
     ns_appsrc=GNUstep/Emacs.base
1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481
     dnl FIXME sourcing this several times in subshells seems inefficient.
     GNUSTEP_SYSTEM_HEADERS="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_SYSTEM_HEADERS)"
     GNUSTEP_SYSTEM_LIBRARIES="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_SYSTEM_LIBRARIES)"
     dnl I seemed to need these as well with GNUstep-startup 0.25.
     GNUSTEP_LOCAL_HEADERS="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_LOCAL_HEADERS)"
     GNUSTEP_LOCAL_LIBRARIES="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_LOCAL_LIBRARIES)"
     test "x${GNUSTEP_LOCAL_HEADERS}" != "x" && \
       GNUSTEP_LOCAL_HEADERS="-I${GNUSTEP_LOCAL_HEADERS}"
     test "x${GNUSTEP_LOCAL_LIBRARIES}" != "x" && \
       GNUSTEP_LOCAL_LIBRARIES="-L${GNUSTEP_LOCAL_LIBRARIES}"
     CPPFLAGS="$CPPFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
     CFLAGS="$CFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
     LDFLAGS="$LDFLAGS -L${GNUSTEP_SYSTEM_LIBRARIES} ${GNUSTEP_LOCAL_LIBRARIES}"
     LIB_STANDARD=
     START_FILES=
     TEMACS_LDFLAGS2=
1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498
     dnl GNUstep defines BASE_NATIVE_OBJC_EXCEPTIONS to 0 or 1.
     dnl If they had chosen to either define it or not, we could have
     dnl just used AC_CHECK_DECL here.
     AC_CACHE_CHECK(if GNUstep defines BASE_NATIVE_OBJC_EXCEPTIONS,
       emacs_cv_objc_exceptions,
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <GNUstepBase/GSConfig.h>]],
[[#if defined BASE_NATIVE_OBJC_EXCEPTIONS && BASE_NATIVE_OBJC_EXCEPTIONS > 0
1;
#else
fail;
#endif]])], emacs_cv_objc_exceptions=yes, emacs_cv_objc_exceptions=no ) )
     if test $emacs_cv_objc_exceptions = yes; then
       dnl _NATIVE_OBJC_EXCEPTIONS is used by the GNUstep headers.
       AC_DEFINE(_NATIVE_OBJC_EXCEPTIONS, 1,
         [Define if GNUstep uses ObjC exceptions.])
       GNU_OBJC_CFLAGS="-fobjc-exceptions"
     fi
1499
  fi
1500 1501 1502 1503

  dnl This is only used while we test the NS headers, it gets reset below.
  CFLAGS="$CFLAGS $GNU_OBJC_CFLAGS"

1504 1505 1506 1507 1508 1509 1510
  AC_CHECK_HEADER([AppKit/AppKit.h], [HAVE_NS=yes],
  		  [AC_MSG_ERROR([`--with-ns' was specified, but the include
  files are missing or cannot be compiled.])])
  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <Foundation/NSObjCRuntime.h>],
                                     [NSInteger i;])],
		    ns_have_nsinteger=yes,
		    ns_have_nsinteger=no)
1511 1512
  if test $ns_have_nsinteger = yes; then
    AC_DEFINE(NS_HAVE_NSINTEGER, 1, [Define to 1 if `NSInteger' is defined.])
1513 1514 1515 1516
  fi
fi
AC_SUBST(TEMACS_LDFLAGS2)

1517
INSTALL_ARCH_INDEP_EXTRA=install-etc
1518
ns_self_contained=no
1519
NS_OBJ=
Tom Tromey's avatar
Tom Tromey committed
1520
NS_OBJC_OBJ=
1521
if test "${HAVE_NS}" = yes; then
1522
  if test "$with_toolkit_scroll_bars" = "no"; then
Glenn Morris's avatar
Glenn Morris committed
1523
    AC_MSG_ERROR([Non-toolkit scroll bars are not implemented for Nextstep.])
1524 1525
  fi

1526 1527 1528
  window_system=nextstep
  # set up packaging dirs
  if test "${EN_NS_SELF_CONTAINED}" = yes; then
1529
     ns_self_contained=yes
1530
     prefix=${ns_appresdir}
1531
     exec_prefix=${ns_appbindir}
1532 1533 1534
     dnl This one isn't really used, only archlibdir is.
     libexecdir="\${ns_appbindir}/libexec"
     archlibdir="\${ns_appbindir}/libexec"
1535 1536
     docdir="\${ns_appresdir}/etc"
     etcdir="\${ns_appresdir}/etc"
1537 1538 1539
     dnl FIXME maybe set datarootdir instead.
     dnl That would also get applications, icons, man.
     infodir="\${ns_appresdir}/info"
1540
     mandir="\${ns_appresdir}/man"
1541
     lispdir="\${ns_appresdir}/lisp"
1542
     leimdir="\${ns_appresdir}/leim"
1543
     INSTALL_ARCH_INDEP_EXTRA=
1544
  fi
Tom Tromey's avatar
Tom Tromey committed
1545
  NS_OBJC_OBJ="nsterm.o nsfns.o nsmenu.o nsselect.o nsimage.o nsfont.o"
1546 1547 1548
fi
CFLAGS="$tmp_CFLAGS"
CPPFLAGS="$tmp_CPPFLAGS"
1549
AC_SUBST(INSTALL_ARCH_INDEP_EXTRA)
1550
AC_SUBST(ns_self_contained)
1551
AC_SUBST(NS_OBJ)
Tom Tromey's avatar
Tom Tromey committed
1552
AC_SUBST(NS_OBJC_OBJ)
1553 1554
AC_SUBST(LIB_STANDARD)

1555 1556 1557 1558 1559 1560 1561 1562
## $window_system is now set to the window system we will
## ultimately use.

term_header=
HAVE_X_WINDOWS=no
HAVE_X11=no
USE_X_TOOLKIT=none