TUTORIAL 45.8 KB
Newer Older
1
Emacs tutorial.  See end for copying conditions.
Jim Blandy's avatar
Jim Blandy committed
2

Karl Heuer's avatar
Karl Heuer committed
3 4
Emacs commands generally involve the CONTROL key (sometimes labeled
CTRL or CTL) or the META key (sometimes labeled EDIT or ALT).  Rather than
5
write that in full each time, we'll use the following abbreviations:
Jim Blandy's avatar
Jim Blandy committed
6 7 8

 C-<chr>  means hold the CONTROL key while typing the character <chr>
	  Thus, C-f would be: hold the CONTROL key and type f.
9
 M-<chr>  means hold the META or EDIT or ALT key down while typing <chr>.
10 11
	  If there is no META, EDIT or ALT key, instead press and release the
	  ESC key and then type <chr>.  We write <ESC> for the ESC key.
Jim Blandy's avatar
Jim Blandy committed
12 13

Important note: to end the Emacs session, type C-x C-c.  (Two characters.)
14
To quit a partially entered command, type C-g.
Jim Blandy's avatar
Jim Blandy committed
15 16
The characters ">>" at the left margin indicate directions for you to
try using a command.  For instance:
17 18
<<Blank lines inserted around following line by help-with-tutorial>>
[Middle of page left blank for didactic purposes.   Text continues below]
19
>> Now type C-v (View next screen) to move to the next screen.
20
	(go ahead, do it by holding down the CONTROL key while typing v).
21
	From now on, you should do this again whenever you finish
Jim Blandy's avatar
Jim Blandy committed
22 23
	reading the screen.

24 25 26
Note that there is an overlap of two lines when you move from screen
to screen; this provides some continuity so you can continue reading
the text.
Jim Blandy's avatar
Jim Blandy committed
27

28 29 30
The first thing that you need to know is how to move around from place
to place in the text.  You already know how to move forward one screen,
with C-v.  To move backwards one screen, type M-v (hold down the META key
31
and type v, or type <ESC>v if you do not have a META, EDIT, or ALT key).
Jim Blandy's avatar
Jim Blandy committed
32

33
>> Try typing M-v and then C-v, a few times.
Jim Blandy's avatar
Jim Blandy committed
34 35


Jim Blandy's avatar
Jim Blandy committed
36 37
* SUMMARY
---------
Jim Blandy's avatar
Jim Blandy committed
38 39 40 41 42

The following commands are useful for viewing screenfuls:

	C-v	Move forward one screenful
	M-v	Move backward one screenful
43 44 45
	C-l	Clear screen and redisplay all the text,
		 moving the text around the cursor
		 to the center of the screen.
46
		 (That's CONTROL-L, not CONTROL-1.)
Jim Blandy's avatar
Jim Blandy committed
47

48 49 50 51 52
>> Find the cursor, and note what text is near it.  Then type C-l.
   Find the cursor again and notice that the same text is still near
   the cursor, but now it is in the center of the screen.
   If you press C-l again, this piece of text will move to the top of
   the screen.  Press C-l again, and it moves to the bottom.
Jim Blandy's avatar
Jim Blandy committed
53

Richard M. Stallman's avatar
Richard M. Stallman committed
54 55 56
You can also use the PageUp and PageDn keys to move by screenfuls, if
your terminal has them, but you can edit more efficiently if you use
C-v and M-v.
57

Jim Blandy's avatar
Jim Blandy committed
58

Jim Blandy's avatar
Jim Blandy committed
59 60
* BASIC CURSOR CONTROL
----------------------
Jim Blandy's avatar
Jim Blandy committed
61

62 63 64
Moving from screenful to screenful is useful, but how do you
move to a specific place within the text on the screen?

65 66 67 68
There are several ways you can do this.  You can use the arrow keys,
but it's more efficient to keep your hands in the standard position
and use the commands C-p, C-b, C-f, and C-n.  These characters
are equivalent to the four arrow keys, like this:
69

Jim Blandy's avatar
Jim Blandy committed
70 71 72 73 74 75
			  Previous line, C-p
				  :
				  :
   Backward, C-b .... Current cursor position .... Forward, C-f
				  :
				  :
76
			    Next line, C-n
Jim Blandy's avatar
Jim Blandy committed
77 78

>> Move the cursor to the line in the middle of that diagram
79 80
   using C-n or C-p.  Then type C-l to see the whole diagram
   centered in the screen.
Jim Blandy's avatar
Jim Blandy committed
81

82 83 84
You'll find it easy to remember these letters by words they stand for:
P for previous, N for next, B for backward and F for forward.  You
will be using these basic cursor positioning commands all the time.
Jim Blandy's avatar
Jim Blandy committed
85 86 87 88 89 90

>> Do a few C-n's to bring the cursor down to this line.

>> Move into the line with C-f's and then up with C-p's.
   See what C-p does when the cursor is in the middle of the line.

91
Each line of text ends with a Newline character, which serves to
92 93
separate it from the following line.  (Normally, the last line in
a file will have a Newline at the end, but Emacs does not require it.)
94 95 96 97

>> Try to C-b at the beginning of a line.  It should move to
   the end of the previous line.  This is because it moves back
   across the Newline character.
Jim Blandy's avatar
Jim Blandy committed
98

99
C-f can move across a Newline just like C-b.
Jim Blandy's avatar
Jim Blandy committed
100

101 102 103
>> Do a few more C-b's, so you get a feel for where the cursor is.
   Then do C-f's to return to the end of the line.
   Then do one more C-f to move to the following line.
Jim Blandy's avatar
Jim Blandy committed
104

105 106 107 108 109 110
When you move past the top or bottom of the screen, the text beyond
the edge shifts onto the screen.  This is called "scrolling".  It
enables Emacs to move the cursor to the specified place in the text
without moving it off the screen.

>> Try to move the cursor off the bottom of the screen with C-n, and
Jim Blandy's avatar
Jim Blandy committed
111 112 113
   see what happens.

If moving by characters is too slow, you can move by words.  M-f
114
(META-f) moves forward a word and M-b moves back a word.
Jim Blandy's avatar
Jim Blandy committed
115

116 117 118 119 120 121 122 123 124
>> Type a few M-f's and M-b's.

When you are in the middle of a word, M-f moves to the end of the word.
When you are in whitespace between words, M-f moves to the end of the
following word.  M-b works likewise in the opposite direction.

>> Type M-f and M-b a few times, interspersed with C-f's and C-b's
   so that you can observe the action of M-f and M-b from various
   places inside and between words.
Jim Blandy's avatar
Jim Blandy committed
125 126 127

Notice the parallel between C-f and C-b on the one hand, and M-f and
M-b on the other hand.  Very often Meta characters are used for
128 129 130 131 132 133 134
operations related to the units defined by language (words, sentences,
paragraphs), while Control characters operate on basic units that are
independent of what you are editing (characters, lines, etc).

This parallel applies between lines and sentences: C-a and C-e move to
the beginning or end of a line, and M-a and M-e move to the beginning
or end of a sentence.
Jim Blandy's avatar
Jim Blandy committed
135 136 137 138

>> Try a couple of C-a's, and then a couple of C-e's.
   Try a couple of M-a's, and then a couple of M-e's.

139 140 141
See how repeated C-a's do nothing, but repeated M-a's keep moving one
more sentence.  Although these are not quite analogous, each one seems
natural.
Jim Blandy's avatar
Jim Blandy committed
142 143 144 145 146

The location of the cursor in the text is also called "point".  To
paraphrase, the cursor shows on the screen where point is located in
the text.

147 148
Here is a summary of simple cursor-moving operations, including the
word and sentence moving commands:
Jim Blandy's avatar
Jim Blandy committed
149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165

	C-f	Move forward a character
	C-b	Move backward a character

	M-f	Move forward a word
	M-b	Move backward a word

	C-n	Move to next line
	C-p	Move to previous line

	C-a	Move to beginning of line
	C-e	Move to end of line

	M-a	Move back to beginning of sentence
	M-e	Move forward to end of sentence

>> Try all of these commands now a few times for practice.
166 167
   These are the most often used commands.

168 169
Two other important cursor motion commands are M-< (META Less-than),
which moves to the beginning of the whole text, and M-> (META
170 171 172 173 174 175 176 177 178 179 180 181 182 183 184
Greater-than), which moves to the end of the whole text.

On most terminals, the "<" is above the comma, so you must use the
shift key to type it.  On these terminals you must use the shift key
to type M-< also; without the shift key, you would be typing M-comma.

>> Try M-< now, to move to the beginning of the tutorial.
   Then use C-v repeatedly to move back here.

>> Try M-> now, to move to the end of the tutorial.
   Then use M-v repeatedly to move back here.

You can also move the cursor with the arrow keys, if your terminal has
arrow keys.  We recommend learning C-b, C-f, C-n and C-p for three
reasons.  First, they work on all kinds of terminals.  Second, once
185
you gain practice at using Emacs, you will find that typing these Control
186 187
characters is faster than typing the arrow keys (because you do not
have to move your hands away from touch-typing position).  Third, once
188
you form the habit of using these Control character commands, you can
189 190 191 192 193
easily learn to use other advanced cursor motion commands as well.

Most Emacs commands accept a numeric argument; for most commands, this
serves as a repeat-count.  The way you give a command a repeat count
is by typing C-u and then the digits before you type the command.  If
Richard M. Stallman's avatar
Richard M. Stallman committed
194
you have a META (or EDIT or ALT) key, there is another, alternative way
195 196
to enter a numeric argument: type the digits while holding down the
META key.  We recommend learning the C-u method because it works on
197 198
any terminal.  The numeric argument is also called a "prefix argument",
because you type the argument before the command it applies to.
Jim Blandy's avatar
Jim Blandy committed
199 200

For instance, C-u 8 C-f moves forward eight characters.
201

202 203
>> Try using C-n or C-p with a numeric argument, to move the cursor
   to a line near this one with just one command.
Jim Blandy's avatar
Jim Blandy committed
204

205 206 207 208 209 210 211
Most commands use the numeric argument as a repeat count, but some
commands use it in some other way.  Several commands (but none of
those you have learned so far) use it as a flag--the presence of a
prefix argument, regardless of its value, makes the command do
something different.

C-v and M-v are another kind of exception.  When given an argument,
212 213
they scroll the text up or down by that many lines, rather than by a
screenful.  For example, C-u 8 C-v scrolls by 8 lines.
Jim Blandy's avatar
Jim Blandy committed
214 215 216

>> Try typing C-u 8 C-v now.

217
This should have scrolled the text up by 8 lines.  If you would like
218
to scroll it down again, you can give an argument to M-v.
Jim Blandy's avatar
Jim Blandy committed
219

Chong Yidong's avatar
Chong Yidong committed
220
If you are using a graphical display, such as X or MS-Windows, there
221
should be a tall rectangular area called a scroll bar on one side of
Chong Yidong's avatar
Chong Yidong committed
222 223
the Emacs window.  You can scroll the text by clicking the mouse in
the scroll bar.
Richard M. Stallman's avatar
Richard M. Stallman committed
224

225
If your mouse has a wheel button, you can also use this to scroll.
Jim Blandy's avatar
Jim Blandy committed
226

227 228 229

* IF EMACS STOPS RESPONDING
---------------------------
Jim Blandy's avatar
Jim Blandy committed
230

231 232 233 234
If Emacs stops responding to your commands, you can stop it safely by
typing C-g.  You can use C-g to stop a command which is taking too
long to execute.

Jim Blandy's avatar
Jim Blandy committed
235
You can also use C-g to discard a numeric argument or the beginning of
236
a command that you do not want to finish.
Jim Blandy's avatar
Jim Blandy committed
237

238
>> Type C-u 100 to make a numeric argument of 100, then type C-g.
Chong Yidong's avatar
Chong Yidong committed
239 240
   Now type C-f.  It should move just one character, because you
   canceled the argument with C-g.
Jim Blandy's avatar
Jim Blandy committed
241

242
If you have typed an <ESC> by mistake, you can get rid of it with a C-g.
Richard M. Stallman's avatar
Richard M. Stallman committed
243

244 245 246 247 248 249 250 251 252 253 254

* DISABLED COMMANDS
-------------------

Some Emacs commands are "disabled" so that beginning users cannot use
them by accident.

If you type one of the disabled commands, Emacs displays a message
saying what the command was, and asking you whether you want to go
ahead and execute the command.

255 256 257
If you really want to try the command, type <SPC> (the Space bar) in
answer to the question.  Normally, if you do not want to execute the
disabled command, answer the question with "n".
258

259
>> Type C-x C-l (which is a disabled command),
260
   then type n to answer the question.
Jim Blandy's avatar
Jim Blandy committed
261 262


Jim Blandy's avatar
Jim Blandy committed
263 264
* WINDOWS
---------
Jim Blandy's avatar
Jim Blandy committed
265

Chong Yidong's avatar
Chong Yidong committed
266 267 268
Emacs can have several "windows", each displaying its own text.  We
will explain later on how to use multiple windows.  Right now we want
to explain how to get rid of extra windows and go back to basic
269
one-window editing.  It is simple:
Jim Blandy's avatar
Jim Blandy committed
270 271 272

	C-x 1	One window (i.e., kill all other windows).

273
That is CONTROL-x followed by the digit 1.  C-x 1 expands the window
274 275
which contains the cursor, to occupy the full screen.  It deletes all
other windows.
Jim Blandy's avatar
Jim Blandy committed
276 277

>> Move the cursor to this line and type C-u 0 C-l.
Chong Yidong's avatar
Chong Yidong committed
278
>> Type C-h k C-f.
Jim Blandy's avatar
Jim Blandy committed
279
   See how this window shrinks, while a new one appears
Chong Yidong's avatar
Chong Yidong committed
280
   to display documentation on the C-f command.
Jim Blandy's avatar
Jim Blandy committed
281 282 283

>> Type C-x 1 and see the documentation listing window disappear.

284
There is a whole series of commands that start with CONTROL-x; many of
285 286 287
them have to do with windows, files, buffers, and related things.
These commands are two, three or four characters long.

Jim Blandy's avatar
Jim Blandy committed
288

Jim Blandy's avatar
Jim Blandy committed
289 290
* INSERTING AND DELETING
------------------------
Jim Blandy's avatar
Jim Blandy committed
291

Chong Yidong's avatar
Chong Yidong committed
292 293 294 295
If you want to insert text, just type the text.  Ordinary characters,
like A, 7, *, etc., are inserted as you type them.  To insert a
Newline character, type <Return> (this is the key on the keyboard
which is sometimes labeled "Enter").
296

297
To delete the character immediately before the current cursor
Chong Yidong's avatar
Chong Yidong committed
298 299 300
position, type <DEL>.  This is the key on the keyboard usually labeled
"Backspace"--the same one you normally use, outside Emacs, to delete
the last character typed.
301

Chong Yidong's avatar
Chong Yidong committed
302 303
There may also be another key on your keyboard labeled <Delete>, but
that's not the one we refer to as <DEL>.
Jim Blandy's avatar
Jim Blandy committed
304

Chong Yidong's avatar
Chong Yidong committed
305 306 307 308
>> Do this now--type a few characters, then delete them by
   typing <DEL> a few times.  Don't worry about this file
   being changed; you will not alter the master tutorial.
   This is your personal copy of it.
309 310

When a line of text gets too big for one line on the screen, the line
Chong Yidong's avatar
Chong Yidong committed
311 312 313 314
of text is "continued" onto a second screen line.  If you're using a
graphical display, little curved arrows appear in the narrow spaces on
each side of the text area (the left and right "fringes"), to indicate
where a line has been continued.  If you're using a text terminal, the
315
continued line is indicated by a backslash (`\') on the rightmost
Chong Yidong's avatar
Chong Yidong committed
316
screen column.
317 318 319 320

>> Insert text until you reach the right margin, and keep on inserting.
   You'll see a continuation line appear.

Chong Yidong's avatar
Chong Yidong committed
321
>> Use <DEL>s to delete the text until the line fits on one screen
Jim Blandy's avatar
Jim Blandy committed
322 323
   line again.  The continuation line goes away.

324 325 326 327 328
You can delete a Newline character just like any other character.
Deleting the Newline character between two lines merges them into
one line.  If the resulting combined line is too long to fit in the
screen width, it will be displayed with a continuation line.

Chong Yidong's avatar
Chong Yidong committed
329
>> Move the cursor to the beginning of a line and type <DEL>.  This
330 331
   merges that line with the previous line.

Jim Blandy's avatar
Jim Blandy committed
332 333
>> Type <Return> to reinsert the Newline you deleted.

334 335 336 337 338 339 340 341 342 343 344 345 346
The <Return> key is special, in that pressing it may do more than
just insert a Newline character.  Depending on the surrounding text,
it may insert whitespace after the Newline character, so that when
you start typing on the newly created line, the text lines up with
that on the previous line.  We call this behavior (where pressing a
key does more than simply inserting the relevant character) "electric".

>> Here is an example of <Return> being electric.
   Type <Return> at the end of this line.

You should see that after inserting the Newline, Emacs inserts spaces
so that the cursor moves under the "T" of "Type".

Jim Blandy's avatar
Jim Blandy committed
347
Remember that most Emacs commands can be given a repeat count;
348 349
this includes text characters.  Repeating a text character inserts
it several times.
Jim Blandy's avatar
Jim Blandy committed
350

351
>> Try that now -- type C-u 8 * to insert ********.
Jim Blandy's avatar
Jim Blandy committed
352 353 354 355 356

You've now learned the most basic way of typing something in
Emacs and correcting errors.  You can delete by words or lines
as well.  Here is a summary of the delete operations:

Chong Yidong's avatar
Chong Yidong committed
357
	<DEL>        Delete the character just before the cursor
358
	C-d   	     Delete the next character after the cursor
Jim Blandy's avatar
Jim Blandy committed
359

Chong Yidong's avatar
Chong Yidong committed
360
	M-<DEL>      Kill the word immediately before the cursor
361
	M-d	     Kill the next word after the cursor
Jim Blandy's avatar
Jim Blandy committed
362

363 364
	C-k	     Kill from the cursor position to end of line
	M-k	     Kill to the end of the current sentence
Jim Blandy's avatar
Jim Blandy committed
365

Chong Yidong's avatar
Chong Yidong committed
366 367 368 369
Notice that <DEL> and C-d vs M-<DEL> and M-d extend the parallel
started by C-f and M-f (well, <DEL> is not really a control character,
but let's not worry about that).  C-k and M-k are like C-e and M-e,
sort of, in that lines are paired with sentences.
Jim Blandy's avatar
Jim Blandy committed
370

Chong Yidong's avatar
Chong Yidong committed
371 372 373 374 375 376
You can also kill a segment of text with one uniform method.  Move to
one end of that part, and type C-<SPC>.  (<SPC> is the Space bar.)
Next, move the cursor to the other end of the text you intend to kill.
As you do this, Emacs highlights the text between the cursor and the
position where you typed C-<SPC>.  Finally, type C-w.  This kills all
the text between the two positions.
Karl Heuer's avatar
Karl Heuer committed
377 378

>> Move the cursor to the Y at the start of the previous paragraph.
379
>> Type C-<SPC>.  Emacs should display a message "Mark set"
Karl Heuer's avatar
Karl Heuer committed
380 381 382 383 384 385
   at the bottom of the screen.
>> Move the cursor to the n in "end", on the second line of the
   paragraph.
>> Type C-w.  This will kill the text starting from the Y,
   and ending just before the n.

386
The difference between "killing" and "deleting" is that "killed" text
387
can be reinserted (at any position), whereas "deleted" things cannot
Xue Fuqiao's avatar
Xue Fuqiao committed
388 389 390 391 392 393 394 395 396
be reinserted in this way (you can, however, undo a deletion--see
below).  Reinsertion of killed text is called "yanking".  (Think of it
as yanking back, or pulling back, some text that was taken away.)
Generally, the commands that can remove a lot of text kill the text
(they are set up so that you can yank the text), while the commands
that remove just one character, or only remove blank lines and spaces,
do deletion (so you cannot yank that text).  <DEL> and C-d do deletion
in the simplest case, with no argument.  When given an argument, they
kill instead.
Jim Blandy's avatar
Jim Blandy committed
397

Chong Yidong's avatar
Chong Yidong committed
398
>> Move the cursor to the beginning of a line which is not empty.
399 400 401
   Then type C-k to kill the text on that line.
>> Type C-k a second time.  You'll see that it kills the Newline
   which follows that line.
Jim Blandy's avatar
Jim Blandy committed
402 403

Note that a single C-k kills the contents of the line, and a second
Richard M. Stallman's avatar
Richard M. Stallman committed
404
C-k kills the line itself, and makes all the other lines move up.  C-k
405 406
treats a numeric argument specially: it kills that many lines AND
their contents.  This is not mere repetition.  C-u 2 C-k kills two
407
lines and their Newlines; typing C-k twice would not do that.
Jim Blandy's avatar
Jim Blandy committed
408

Xue Fuqiao's avatar
Xue Fuqiao committed
409 410 411 412 413 414
You can yank the killed text either at the same place where it was
killed, or at some other place in the text you are editing, or even in
a different file.  You can yank the same text several times; that
makes multiple copies of it.  Some other editors call killing and
yanking "cutting" and "pasting" (see the Glossary in the Emacs
manual).
415 416 417

The command for yanking is C-y.  It reinserts the last killed text,
at the current cursor position.
Jim Blandy's avatar
Jim Blandy committed
418 419 420

>> Try it; type C-y to yank the text back.

421 422
If you do several C-k's in a row, all of the killed text is saved
together, so that one C-y will yank all of the lines at once.
Jim Blandy's avatar
Jim Blandy committed
423 424 425 426 427 428 429 430 431 432 433 434

>> Do this now, type C-k several times.

Now to retrieve that killed text:

>> Type C-y.  Then move the cursor down a few lines and type C-y
   again.  You now see how to copy some text.

What do you do if you have some text you want to yank back, and then
you kill something else?  C-y would yank the more recent kill.  But
the previous text is not lost.  You can get back to it using the M-y
command.  After you have done C-y to get the most recent kill, typing
435
M-y replaces that yanked text with the previous kill.  Typing M-y
436 437 438 439 440 441 442
again and again brings in earlier and earlier kills.  When you have
reached the text you are looking for, you do not have to do anything to
keep it.  Just go on with your editing, leaving the yanked text where
it is.

If you M-y enough times, you come back to the starting point (the most
recent kill).
Jim Blandy's avatar
Jim Blandy committed
443 444 445 446 447 448 449 450 451 452

>> Kill a line, move around, kill another line.
   Then do C-y to get back the second killed line.
   Then do M-y and it will be replaced by the first killed line.
   Do more M-y's and see what you get.  Keep doing them until
   the second kill line comes back, and then a few more.
   If you like, you can try giving M-y positive and negative
   arguments.


Jim Blandy's avatar
Jim Blandy committed
453 454
* UNDO
------
Jim Blandy's avatar
Jim Blandy committed
455

456
If you make a change to the text, and then decide that it was a
Chong Yidong's avatar
Chong Yidong committed
457
mistake, you can undo the change with the undo command, C-/.
458

Chong Yidong's avatar
Chong Yidong committed
459 460
Normally, C-/ undoes the changes made by one command; if you repeat
C-/ several times in a row, each repetition undoes one more command.
461

Chong Yidong's avatar
Chong Yidong committed
462 463
But there are two exceptions: commands that do not change the text
don't count (this includes cursor motion commands and scrolling
464
commands), and self-inserting characters are usually handled in groups
Chong Yidong's avatar
Chong Yidong committed
465 466
of up to 20.  (This is to reduce the number of C-/'s you have to type
to undo insertion of text.)
Jim Blandy's avatar
Jim Blandy committed
467

Chong Yidong's avatar
Chong Yidong committed
468
>> Kill this line with C-k, then type C-/ and it should reappear.
Jim Blandy's avatar
Jim Blandy committed
469

Chong Yidong's avatar
Chong Yidong committed
470 471 472 473
C-_ is an alternative undo command; it works exactly the same as C-/.
On some text terminals, typing C-/ actually sends C-_ to Emacs.
Alternatively, C-x u also works exactly like C-/, but is a little less
convenient to type.
Jim Blandy's avatar
Jim Blandy committed
474

Chong Yidong's avatar
Chong Yidong committed
475
A numeric argument to C-/, C-_, or C-x u acts as a repeat count.
Jim Blandy's avatar
Jim Blandy committed
476

477 478 479 480
You can undo deletion of text just as you can undo killing of text.
The distinction between killing something and deleting it affects
whether you can yank it with C-y; it makes no difference for undo.

Jim Blandy's avatar
Jim Blandy committed
481

Jim Blandy's avatar
Jim Blandy committed
482 483
* FILES
-------
Jim Blandy's avatar
Jim Blandy committed
484 485

In order to make the text you edit permanent, you must put it in a
Chong Yidong's avatar
Chong Yidong committed
486 487 488
file.  Otherwise, it will go away when you exit Emacs.  In order to
put your text in a file, you must "find" the file before you enter the
text.  (This is also called "visiting" the file.)
489 490 491 492 493 494 495 496

Finding a file means that you see the contents of the file within
Emacs.  In many ways, it is as if you were editing the file itself.
However, the changes you make using Emacs do not become permanent
until you "save" the file.  This is so you can avoid leaving a
half-changed file on the system when you do not want to.  Even when
you save, Emacs leaves the original file under a changed name in case
you later decide that your changes were a mistake.
Jim Blandy's avatar
Jim Blandy committed
497 498

If you look near the bottom of the screen you will see a line that
Chong Yidong's avatar
Chong Yidong committed
499
begins with dashes, and starts with " -:---  TUTORIAL" or something
500
like that.  This part of the screen normally shows the name of the
Chong Yidong's avatar
Chong Yidong committed
501 502 503
file that you are visiting.  Right now, you are visiting your personal
copy of the Emacs tutorial, which is called "TUTORIAL".  When you find
a file with Emacs, that file's name will appear in that precise spot.
Jim Blandy's avatar
Jim Blandy committed
504

505 506
One special thing about the command for finding a file is that you
have to say what file name you want.  We say the command "reads an
Chong Yidong's avatar
Chong Yidong committed
507 508
argument" (in this case, the argument is the name of the file).  After
you type the command
Jim Blandy's avatar
Jim Blandy committed
509 510 511

	C-x C-f   Find a file

512 513 514 515 516 517 518
Emacs asks you to type the file name.  The file name you type appears
on the bottom line of the screen.  The bottom line is called the
minibuffer when it is used for this sort of input.  You can use
ordinary Emacs editing commands to edit the file name.

While you are entering the file name (or any minibuffer input),
you can cancel the command with C-g.
Jim Blandy's avatar
Jim Blandy committed
519 520 521 522 523

>> Type C-x C-f, then type C-g.  This cancels the minibuffer,
   and also cancels the C-x C-f command that was using the
   minibuffer.  So you do not find any file.

524
When you have finished entering the file name, type <Return> to
Chong Yidong's avatar
Chong Yidong committed
525 526
terminate it.  The minibuffer disappears, and the C-x C-f command goes
to work to find the file you chose.
527

Chong Yidong's avatar
Chong Yidong committed
528 529 530
The file contents now appear on the screen, and you can edit the
contents.  When you wish to make your changes permanent, type the
command
Jim Blandy's avatar
Jim Blandy committed
531 532 533

	C-x C-s   Save the file

534 535 536
This copies the text within Emacs into the file.  The first time you
do this, Emacs renames the original file to a new name so that it is
not lost.  The new name is made by adding "~" to the end of the
537 538
original file's name.  When saving is finished, Emacs displays the
name of the file written.
Jim Blandy's avatar
Jim Blandy committed
539

Chong Yidong's avatar
Chong Yidong committed
540 541 542
>> Type C-x C-s TUTORIAL <Return>.
   This should save this tutorial to a file named TUTORIAL, and show
   "Wrote ...TUTORIAL" at the bottom of the screen.
Jim Blandy's avatar
Jim Blandy committed
543

544 545
You can find an existing file, to view it or edit it.  You can also
find a file which does not already exist.  This is the way to create a
546 547 548 549 550
file with Emacs: find the file, which starts out empty, and then begin
inserting the text for the file.  When you ask to "save" the file,
Emacs actually creates the file with the text that you have inserted.
From then on, you can consider yourself to be editing an already
existing file.
Jim Blandy's avatar
Jim Blandy committed
551 552


Jim Blandy's avatar
Jim Blandy committed
553 554
* BUFFERS
---------
Jim Blandy's avatar
Jim Blandy committed
555 556 557 558 559

If you find a second file with C-x C-f, the first file remains
inside Emacs.  You can switch back to it by finding it again with
C-x C-f.  This way you can get quite a number of files inside Emacs.

Karl Heuer's avatar
Karl Heuer committed
560
Emacs stores each file's text inside an object called a "buffer".
561
Finding a file makes a new buffer inside Emacs.  To see a list of the
Chong Yidong's avatar
Chong Yidong committed
562
buffers that currently exist, type
Jim Blandy's avatar
Jim Blandy committed
563 564 565 566 567

	C-x C-b   List buffers

>> Try C-x C-b now.

Richard M. Stallman's avatar
Richard M. Stallman committed
568 569
See how each buffer has a name, and it may also have a file name for
the file whose contents it holds.  ANY text you see in an Emacs window
570
is always part of some buffer.
Jim Blandy's avatar
Jim Blandy committed
571 572 573

>> Type C-x 1 to get rid of the buffer list.

Juanma Barranquero's avatar
Juanma Barranquero committed
574
When you have several buffers, only one of them is "current" at any
Richard M. Stallman's avatar
Richard M. Stallman committed
575 576 577 578 579 580
time.  That buffer is the one you edit.  If you want to edit another
buffer, you need to "switch" to it.  If you want to switch to a buffer
that corresponds to a file, you can do it by visiting the file again
with C-x C-f.  But there is an easier way: use the C-x b command.
In that command, you have to type the buffer's name.

Chong Yidong's avatar
Chong Yidong committed
581 582
>> Create a file named "foo" by typing C-x C-f foo <Return>.
   Then type C-x b TUTORIAL <Return> to come back to this tutorial.
Richard M. Stallman's avatar
Richard M. Stallman committed
583 584 585

Most of the time, the buffer's name is the same as the file name
(without the file directory part).  However, this is not always true.
Chong Yidong's avatar
Chong Yidong committed
586 587
The buffer list you make with C-x C-b shows you both the buffer name
and the file name of every buffer.
Richard M. Stallman's avatar
Richard M. Stallman committed
588

Chong Yidong's avatar
Chong Yidong committed
589 590 591 592 593 594 595 596 597
Some buffers do not correspond to files.  The buffer named
"*Buffer List*", which contains the buffer list that you made with
C-x C-b, does not have any file.  This TUTORIAL buffer initially did
not have a file, but now it does, because in the previous section you
typed C-x C-s and saved it to a file.

The buffer named "*Messages*" also does not correspond to any file.
This buffer contains the messages that have appeared on the bottom
line during your Emacs session.
Richard M. Stallman's avatar
Richard M. Stallman committed
598 599

>> Type C-x b *Messages* <Return> to look at the buffer of messages.
Richard M. Stallman's avatar
Richard M. Stallman committed
600
   Then type C-x b TUTORIAL <Return> to come back to this tutorial.
Richard M. Stallman's avatar
Richard M. Stallman committed
601

Jim Blandy's avatar
Jim Blandy committed
602 603 604 605 606
If you make changes to the text of one file, then find another file,
this does not save the first file.  Its changes remain inside Emacs,
in that file's buffer.  The creation or editing of the second file's
buffer has no effect on the first file's buffer.  This is very useful,
but it also means that you need a convenient way to save the first
607 608
file's buffer.  Having to switch back to that buffer, in order to save
it with C-x C-s, would be a nuisance.  So we have
Jim Blandy's avatar
Jim Blandy committed
609 610 611

	C-x s     Save some buffers

612 613 614
C-x s asks you about each buffer which contains changes that you have
not saved.  It asks you, for each such buffer, whether to save the
buffer.
Jim Blandy's avatar
Jim Blandy committed
615

616 617 618
>> Insert a line of text, then type C-x s.
   It should ask you whether to save the buffer named TUTORIAL.
   Answer yes to the question by typing "y".
Jim Blandy's avatar
Jim Blandy committed
619

Karl Heuer's avatar
Karl Heuer committed
620

Jim Blandy's avatar
Jim Blandy committed
621 622
* EXTENDING THE COMMAND SET
---------------------------
Jim Blandy's avatar
Jim Blandy committed
623 624 625 626 627 628 629 630

There are many, many more Emacs commands than could possibly be put
on all the control and meta characters.  Emacs gets around this with
the X (eXtend) command.  This comes in two flavors:

	C-x	Character eXtend.  Followed by one character.
	M-x	Named command eXtend.  Followed by a long name.

631
These are commands that are generally useful but are used less than the
632 633 634 635 636
commands you have already learned about.  You have already seen a few
of them: the file commands C-x C-f to Find and C-x C-s to Save, for
example.  Another example is the command to end the Emacs
session--this is the command C-x C-c.  (Do not worry about losing
changes you have made; C-x C-c offers to save each changed file before
637
it kills Emacs.)
Jim Blandy's avatar
Jim Blandy committed
638

Chong Yidong's avatar
Chong Yidong committed
639 640 641 642
If you are using a graphical display, you don't need any special
command to move from Emacs to another application.  You can do this
with the mouse or with window manager commands.  However, if you're
using a text terminal which can only show one application at a time,
643
you need to "suspend" Emacs to move to any other application.
644

645 646 647
C-z is the command to exit Emacs *temporarily*--so that you can go
back to the same Emacs session afterward.  When Emacs is running on a
text terminal, C-z "suspends" Emacs; that is, it returns to the shell
Chong Yidong's avatar
Chong Yidong committed
648 649
but does not destroy the Emacs job.  In the most common shells, you
can resume Emacs with the `fg' command or with `%emacs'.
650 651

The time to use C-x C-c is when you are about to log out.  It's also
652 653
the right thing to use to exit an Emacs invoked for a quick edit, such
as by a mail handling utility.
Jim Blandy's avatar
Jim Blandy committed
654

655
There are many C-x commands.  Here is a list of the ones you have learned:
Jim Blandy's avatar
Jim Blandy committed
656

657 658 659 660 661 662 663 664
	C-x C-f		Find file
	C-x C-s		Save file
	C-x s		Save some buffers
	C-x C-b		List buffers
	C-x b		Switch buffer
	C-x C-c		Quit Emacs
	C-x 1		Delete all but one window
	C-x u		Undo
Jim Blandy's avatar
Jim Blandy committed
665 666

Named eXtended commands are commands which are used even less
667
frequently, or commands which are used only in certain modes.  An
668 669
example is the command replace-string, which replaces one string with
another in the buffer.  When you type M-x, Emacs prompts you at the
670 671
bottom of the screen with M-x and you should type the name of the
command; in this case, "replace-string".  Just type "repl s<TAB>" and
672
Emacs will complete the name.  (<TAB> is the Tab key, usually found
Eli Zaretskii's avatar
Eli Zaretskii committed
673
above the CapsLock or Shift key near the left edge of the keyboard.)
Chong Yidong's avatar
Chong Yidong committed
674
Submit the command name with <Return>.
675 676 677 678

The replace-string command requires two arguments--the string to be
replaced, and the string to replace it with.  You must end each
argument with <Return>.
Jim Blandy's avatar
Jim Blandy committed
679 680 681 682

>> Move the cursor to the blank line two lines below this one.
   Then type M-x repl s<Return>changed<Return>altered<Return>.

683 684 685
   Notice how this line has changed: you've replaced the word
   "changed" with "altered" wherever it occurred, after the
   initial position of the cursor.
Jim Blandy's avatar
Jim Blandy committed
686 687


Richard M. Stallman's avatar
Richard M. Stallman committed
688 689 690 691 692
* AUTO SAVE
-----------

When you have made changes in a file, but you have not saved them yet,
they could be lost if your computer crashes.  To protect you from
693 694 695 696 697
this, Emacs periodically writes an "auto save" file for each file that
you are editing.  The auto save file name has a # at the beginning and
the end; for example, if your file is named "hello.c", its auto save
file's name is "#hello.c#".  When you save the file in the normal way,
Emacs deletes its auto save file.
Richard M. Stallman's avatar
Richard M. Stallman committed
698 699 700

If the computer crashes, you can recover your auto-saved editing by
finding the file normally (the file you were editing, not the auto
701
save file) and then typing M-x recover-file <Return>.  When it asks for
Karl Heuer's avatar
Karl Heuer committed
702
confirmation, type yes<Return> to go ahead and recover the auto-save
Richard M. Stallman's avatar
Richard M. Stallman committed
703 704 705
data.


706
* ECHO AREA
Jim Blandy's avatar
Jim Blandy committed
707
-----------
Jim Blandy's avatar
Jim Blandy committed
708

Richard M. Stallman's avatar
Richard M. Stallman committed
709 710 711
If Emacs sees that you are typing multicharacter commands slowly, it
shows them to you at the bottom of the screen in an area called the
"echo area".  The echo area contains the bottom line of the screen.
Jim Blandy's avatar
Jim Blandy committed
712 713


714 715 716
* MODE LINE
-----------

Richard M. Stallman's avatar
Richard M. Stallman committed
717
The line immediately above the echo area is called the "mode line".
718 719
The mode line says something like this:

Chong Yidong's avatar
Chong Yidong committed
720
 -:**-  TUTORIAL       63% L749    (Fundamental)
721 722 723

This line gives useful information about the status of Emacs and
the text you are editing.
Jim Blandy's avatar
Jim Blandy committed
724 725

You already know what the filename means--it is the file you have
Chong Yidong's avatar
Chong Yidong committed
726 727 728 729 730 731
found.  NN% indicates your current position in the buffer text; it
means that NN percent of the buffer is above the top of the screen.
If the top of the buffer is on the screen, it will say "Top" instead
of " 0%".  If the bottom of the buffer is on the screen, it will say
"Bot".  If you are looking at a buffer so small that all of it fits on
the screen, the mode line says "All".
Jim Blandy's avatar
Jim Blandy committed
732

Gerd Moellmann's avatar
Gerd Moellmann committed
733 734 735
The L and digits indicate position in another way: they give the
current line number of point.

Jim Blandy's avatar
Jim Blandy committed
736
The stars near the front mean that you have made changes to the text.
737 738
Right after you visit or save a file, that part of the mode line shows
no stars, just dashes.
Jim Blandy's avatar
Jim Blandy committed
739 740

The part of the mode line inside the parentheses is to tell you what
741
editing modes you are in.  The default mode is Fundamental which is
742
what you are using now.  It is an example of a "major mode".
743 744

Emacs has many different major modes.  Some of them are meant for
745
editing different languages and/or kinds of text, such as Lisp mode,
746 747 748 749 750 751 752 753 754
Text mode, etc.  At any time one and only one major mode is active,
and its name can always be found in the mode line just where
"Fundamental" is now.

Each major mode makes a few commands behave differently.  For example,
there are commands for creating comments in a program, and since each
programming language has a different idea of what a comment should
look like, each major mode has to insert comments differently.  Each
major mode is the name of an extended command, which is how you can
755
switch to that mode.  For example, M-x fundamental-mode is a command to
756
switch to Fundamental mode.
Jim Blandy's avatar
Jim Blandy committed
757

758
If you are going to be editing human-language text, such as this file, you
Jim Blandy's avatar
Jim Blandy committed
759
should probably use Text Mode.
760

761
>> Type M-x text-mode <Return>.
Jim Blandy's avatar
Jim Blandy committed
762

763
Don't worry, none of the Emacs commands you have learned changes in
764 765 766
any great way.  But you can observe that M-f and M-b now treat
apostrophes as part of words.  Previously, in Fundamental mode,
M-f and M-b treated apostrophes as word-separators.
Jim Blandy's avatar
Jim Blandy committed
767

768 769 770 771 772
Major modes usually make subtle changes like that one: most commands
do "the same job" in each major mode, but they work a little bit
differently.

To view documentation on your current major mode, type C-h m.
Jim Blandy's avatar
Jim Blandy committed
773

774
>> Move the cursor to the line following this line.
Chong Yidong's avatar
Chong Yidong committed
775
>> Type C-l C-l to bring this line to the top of screen.
Jim Blandy's avatar
Jim Blandy committed
776 777 778 779
>> Type C-h m, to see how Text mode differs from Fundamental mode.
>> Type C-x 1 to remove the documentation from the screen.

Major modes are called major because there are also minor modes.
Richard M. Stallman's avatar
Richard M. Stallman committed
780
Minor modes are not alternatives to the major modes, just minor
781 782 783 784
modifications of them.  Each minor mode can be turned on or off by
itself, independent of all other minor modes, and independent of your
major mode.  So you can use no minor modes, or one minor mode, or any
combination of several minor modes.
Jim Blandy's avatar
Jim Blandy committed
785

786 787 788 789
One minor mode which is very useful, especially for editing
human-language text, is Auto Fill mode.  When this mode is on, Emacs
breaks the line in between words automatically whenever you insert
text and make a line that is too wide.
790

791 792 793 794 795
You can turn Auto Fill mode on by doing M-x auto-fill-mode <Return>.
When the mode is on, you can turn it off again by doing
M-x auto-fill-mode <Return>.  If the mode is off, this command turns
it on, and if the mode is on, this command turns it off.  We say that
the command "toggles the mode".
Jim Blandy's avatar
Jim Blandy committed
796

797
>> Type M-x auto-fill-mode <Return> now.  Then insert a line of "asdf "
Jim Blandy's avatar
Jim Blandy committed
798 799 800 801 802 803 804 805 806 807 808 809
   over again until you see it divide into two lines.  You must put in
   spaces between them because Auto Fill breaks lines only at spaces.

The margin is usually set at 70 characters, but you can change it
with the C-x f command.  You should give the margin setting you want
as a numeric argument.

>> Type C-x f with an argument of 20.  (C-u 2 0 C-x f).
   Then type in some text and see Emacs fill lines of 20
   characters with it.  Then set the margin back to 70 using
   C-x f again.

Richard M. Stallman's avatar
Richard M. Stallman committed
810
If you make changes in the middle of a paragraph, Auto Fill mode
Jim Blandy's avatar
Jim Blandy committed
811
does not re-fill it for you.
812
To re-fill the paragraph, type M-q (META-q) with the cursor inside
Jim Blandy's avatar
Jim Blandy committed
813 814 815 816
that paragraph.

>> Move the cursor into the previous paragraph and type M-q.

Karl Heuer's avatar
Karl Heuer committed
817

Jim Blandy's avatar
Jim Blandy committed
818 819
* SEARCHING
-----------
Jim Blandy's avatar
Jim Blandy committed
820

Chong Yidong's avatar
Chong Yidong committed
821 822 823 824
Emacs can do searches for strings (a "string" is a group of contiguous
characters) either forward through the text or backward through it.
Searching for a string is a cursor motion command; it moves the cursor
to the next place where that string appears.
825

826
The Emacs search command is "incremental".  This means that the
827 828 829 830 831 832 833 834
search happens while you type in the string to search for.

The command to initiate a search is C-s for forward search, and C-r
for reverse search.  BUT WAIT!  Don't try them now.

When you type C-s you'll notice that the string "I-search" appears as
a prompt in the echo area.  This tells you that Emacs is in what is
called an incremental search waiting for you to type the thing that
835
you want to search for.  <Return> terminates a search.
Jim Blandy's avatar
Jim Blandy committed
836 837 838 839

>> Now type C-s to start a search.  SLOWLY, one letter at a time,
   type the word 'cursor', pausing after you type each
   character to notice what happens to the cursor.
840 841
   Now you have searched for "cursor", once.
>> Type C-s again, to search for the next occurrence of "cursor".
Chong Yidong's avatar
Chong Yidong committed
842
>> Now type <DEL> four times and see how the cursor moves.
843
>> Type <Return> to terminate the search.
Jim Blandy's avatar
Jim Blandy committed
844 845

Did you see what happened?  Emacs, in an incremental search, tries to
846 847
go to the occurrence of the string that you've typed out so far.  To
go to the next occurrence of 'cursor' just type C-s again.  If no such
Richard M. Stallman's avatar
Richard M. Stallman committed
848 849
occurrence exists, Emacs beeps and tells you the search is currently
"failing".  C-g would also terminate the search.
Jim Blandy's avatar
Jim Blandy committed
850

851 852
If you are in the middle of an incremental search and type <DEL>, the
search "retreats" to an earlier location.  If you type <DEL> just
Chong Yidong's avatar
Chong Yidong committed
853 854 855 856 857 858 859 860
after you had typed C-s to advance to the next occurrence of a search
string, the <DEL> moves the cursor back to an earlier occurrence.  If
there are no earlier occurrences, the <DEL> erases the last character
in the search string.  For instance, suppose you have typed "c", to
search for the first occurrence of "c".  Now if you type "u", the
cursor will move to the first occurrence of "cu".  Now type <DEL>.
This erases the "u" from the search string, and the cursor moves back
to the first occurrence of "c".
Jim Blandy's avatar
Jim Blandy committed
861

862
If you are in the middle of a search and type a control or meta
Chong Yidong's avatar
Chong Yidong committed
863 864
character (with a few exceptions--characters that are special in a
search, such as C-s and C-r), the search is terminated.
Jim Blandy's avatar
Jim Blandy committed
865

Chong Yidong's avatar
Chong Yidong committed
866 867
C-s starts a search that looks for any occurrence of the search string
AFTER the current cursor position.  If you want to search for
868 869 870
something earlier in the text, type C-r instead.  Everything that we
have said about C-s also applies to C-r, except that the direction of
the search is reversed.
Jim Blandy's avatar
Jim Blandy committed
871 872


Jim Blandy's avatar
Jim Blandy committed
873 874
* MULTIPLE WINDOWS
------------------
Jim Blandy's avatar
Jim Blandy committed
875

Chong Yidong's avatar
Chong Yidong committed
876 877 878
One of the nice features of Emacs is that you can display more than
one window on the screen at the same time.  (Note that Emacs uses the
term "frames"--described in the next section--for what some other
879 880
applications call "windows".  The Emacs manual contains a Glossary of
Emacs terms.)
Jim Blandy's avatar
Jim Blandy committed
881

Chong Yidong's avatar
Chong Yidong committed
882
>> Move the cursor to this line and type C-l C-l.
Jim Blandy's avatar
Jim Blandy committed
883 884

>> Now type C-x 2 which splits the screen into two windows.
Chong Yidong's avatar
Chong Yidong committed
885 886
   Both windows display this tutorial.  The editing cursor stays in
   the top window.
Jim Blandy's avatar
Jim Blandy committed
887 888

>> Type C-M-v to scroll the bottom window.
889
   (If you do not have a real META key, type <ESC> C-v.)
Jim Blandy's avatar
Jim Blandy committed
890 891 892 893 894 895

>> Type C-x o ("o" for "other") to move the cursor to the bottom window.
>> Use C-v and M-v in the bottom window to scroll it.
   Keep reading these directions in the top window.

>> Type C-x o again to move the cursor back to the top window.
896
   The cursor in the top window is just where it was before.
Jim Blandy's avatar
Jim Blandy committed
897

Chong Yidong's avatar
Chong Yidong committed
898 899 900 901 902
You can keep using C-x o to switch between the windows.  The "selected
window", where most editing takes place, is the one with a prominent
cursor which blinks when you are not typing.  The other windows have
their own cursor positions; if you are running Emacs in a graphical
display, those cursors are drawn as unblinking hollow boxes.
Jim Blandy's avatar
Jim Blandy committed
903 904

The command C-M-v is very useful when you are editing text in one
Chong Yidong's avatar
Chong Yidong committed
905
window and using the other window just for reference.  Without leaving
906 907
the selected window, you can scroll the text in the other window with
C-M-v.
Jim Blandy's avatar
Jim Blandy committed
908

Chong Yidong's avatar
Chong Yidong committed
909 910 911 912 913
C-M-v is an example of a CONTROL-META character.  If you have a META
(or Alt) key, you can type C-M-v by holding down both CONTROL and META
while typing v.  It does not matter whether CONTROL or META "comes
first," as both of these keys act by modifying the characters you
type.
914

Chong Yidong's avatar
Chong Yidong committed
915 916
If you do not have a META key, and you use <ESC> instead, the order
does matter: you must type <ESC> followed by CONTROL-v, because
917 918
CONTROL-<ESC> v will not work.  This is because <ESC> is a character
in its own right, not a modifier key.
919

Jim Blandy's avatar
Jim Blandy committed
920 921 922 923 924 925
>> Type C-x 1 (in the top window) to get rid of the bottom window.

(If you had typed C-x 1 in the bottom window, that would get rid
of the top one.  Think of this command as "Keep just one
window--the window I am already in.")

926 927 928
You do not have to display the same buffer in both windows.  If you
use C-x C-f to find a file in one window, the other window does not
change.  You can find a file in each window independently.
Jim Blandy's avatar
Jim Blandy committed
929

930
Here is another way to use two windows to display two different things:
Jim Blandy's avatar
Jim Blandy committed
931 932

>> Type C-x 4 C-f followed by the name of one of your files.
933
   End with <Return>.  See the specified file appear in the bottom
Jim Blandy's avatar
Jim Blandy committed
934 935 936 937 938 939
   window.  The cursor goes there, too.

>> Type C-x o to go back to the top window, and C-x 1 to delete
   the bottom window.


940 941 942
* MULTIPLE FRAMES
------------------

Chong Yidong's avatar
Chong Yidong committed
943 944 945 946 947 948
Emacs can also create multiple "frames".  A frame is what we call one
collection of windows, together with its menus, scroll bars, echo
area, etc.  On graphical displays, what Emacs calls a "frame" is what
most other applications call a "window".  Multiple graphical frames
can be shown on the screen at the same time.  On a text terminal, only
one frame can be shown at a time.
949 950 951 952 953 954 955 956 957 958

>> Type M-x make-frame <Return>.
   See a new frame appear on your screen.

You can do everything you did in the original frame in the new frame.
There is nothing special about the first frame.

>> Type M-x delete-frame <Return>.
   This removes the selected frame.

Chong Yidong's avatar
Chong Yidong committed
959 960 961 962
You can also remove a frame by using the normal method provided by the
graphical system (often clicking a button with an "X" at a top corner
of the frame).  If you remove the Emacs job's last frame this way,
that exits Emacs.
963 964


Jim Blandy's avatar
Jim Blandy committed
965 966
* RECURSIVE EDITING LEVELS
--------------------------
Jim Blandy's avatar
Jim Blandy committed
967 968 969 970 971 972

Sometimes you will get into what is called a "recursive editing
level".  This is indicated by square brackets in the mode line,
surrounding the parentheses around the major mode name.  For
example, you might see [(Fundamental)] instead of (Fundamental).

973 974 975
To get out of the recursive editing level, type <ESC> <ESC> <ESC>.
That is an all-purpose "get out" command.  You can also use it for
eliminating extra windows, and getting out of the minibuffer.
Jim Blandy's avatar
Jim Blandy committed
976

977 978
>> Type M-x to get into a minibuffer; then type <ESC> <ESC> <ESC> to
   get out.
Jim Blandy's avatar
Jim Blandy committed
979

980 981 982
You cannot use C-g to get out of a recursive editing level.  This is
because C-g is used for canceling commands and arguments WITHIN the
recursive editing level.
Jim Blandy's avatar
Jim Blandy committed
983 984


Jim Blandy's avatar
Jim Blandy committed
985 986
* GETTING MORE HELP
-------------------
Jim Blandy's avatar
Jim Blandy committed
987 988 989 990

In this tutorial we have tried to supply just enough information to
get you started using Emacs.  There is so much available in Emacs that
it would be impossible to explain it all here.  However, you may want
991 992 993
to learn more about Emacs since it has many other useful features.
Emacs provides commands for reading documentation about Emacs
commands.  These "help" commands all start with the character
994
CONTROL-h, which is called "the Help character".
Jim Blandy's avatar
Jim Blandy committed
995

996
To use the Help features, type the C-h character, and then a
Jim Blandy's avatar
Jim Blandy committed
997 998
character saying what kind of help you want.  If you are REALLY lost,
type C-h ? and Emacs will tell you what kinds of help it can give.
999
If you have typed C-h and decide you do not want any help, just
1000
type C-g to cancel it.
Jim Blandy's avatar
Jim Blandy committed
1001

1002 1003
(If C-h does not display a message about help at the bottom of the
screen, try typing the F1 key or M-x help <Return> instead.)
Richard M. Stallman's avatar
Richard M. Stallman committed
1004 1005 1006

The most basic HELP feature is C-h c.  Type C-h, the character c, and
a command character or sequence; then Emacs displays a very brief
Jim Blandy's avatar
Jim Blandy committed
1007 1008
description of the command.

Gerd Moellmann's avatar
Gerd Moellmann committed
1009
>> Type C-h c C-p.
Richard M. Stallman's avatar
Richard M. Stallman committed
1010 1011

The message should be something like this:
Jim Blandy's avatar
Jim Blandy committed
1012 1013 1014

	C-p runs the command previous-line

1015 1016
This tells you the "name of the function".  Since function names
are chosen to indicate what the command does, they can serve as
1017 1018
very brief documentation--sufficient to remind you of commands you
have already learned.
Jim Blandy's avatar
Jim Blandy committed
1019 1020

Multi-character commands such as C-x C-s and (if you have no META or
1021
EDIT or ALT key) <ESC>v are also allowed after C-h c.
Jim Blandy's avatar
Jim Blandy committed
1022

1023
To get more information about a command, use C-h k instead of C-h c.
Jim Blandy's avatar
Jim Blandy committed
1024

Gerd Moellmann's avatar
Gerd Moellmann committed
1025
>> Type C-h k C-p.
Jim Blandy's avatar
Jim Blandy committed
1026

Chong Yidong's avatar
Chong Yidong committed
1027 1028 1029 1030 1031
This displays the documentation of the function, as well as its name,
in an Emacs window.  When you are finished reading the output, type
C-x 1 to get rid of that window.  You do not have to do this right
away.  You can do some editing while referring to the help text, and
then type C-x 1.
Jim Blandy's avatar
Jim Blandy committed
1032 1033 1034 1035 1036 1037

Here are some other useful C-h options:

   C-h f	Describe a function.  You type in the name of the
		function.

1038
>> Try typing C-h f previous-line <Return>.
1039
   This displays all the information Emacs has about the
1040
   function which implements the C-p command.
Jim Blandy's avatar
Jim Blandy committed
1041

1042 1043 1044
A similar command C-h v displays the documentation of variables,
including those whose values you can set to customize Emacs behavior.
You need to type in the name of the variable when Emacs prompts for it.
1045

Jim Blandy's avatar
Jim Blandy committed
1046 1047
   C-h a	Command Apropos.  Type in a keyword and Emacs will list
		all the commands whose names contain that keyword.
1048
		These commands can all be invoked with META-x.
Jim Blandy's avatar
Jim Blandy committed
1049
		For some commands, Command Apropos will also list a one
1050
		or two character sequence which runs the same command.
Jim Blandy's avatar
Jim Blandy committed
1051

1052
>> Type C-h a file <Return>.
Jim Blandy's avatar
Jim Blandy committed
1053

1054
This displays in another window a list of all M-x commands with "file"
1055 1056
in their names.  You will see character-commands listed beside the
corresponding command names (such as C-x C-f beside find-file).
Jim Blandy's avatar
Jim Blandy committed
1057 1058 1059 1060

>> Type C-M-v to scroll the help window.  Do this a few times.

>> Type C-x 1 to delete the help window.
Jim Blandy's avatar
Jim Blandy committed
1061