README.multi-tty 14.4 KB
Newer Older
1 2 3 4 5 6 7 8
			-*- coding: utf-8; -*-
GOAL
----

The ultimate goal of this branch is to implement support for opening
multiple, different tty devices and simultaneous X and tty frames from
a single Emacs session.

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Some use cases:

Emacs is notoriously slow at startup, so most people use another
editor or emacsclient for quick editing jobs from the console.
Unfortunately, emacsclient was very awkward to use, because it did not
support opening a new Emacs frame on the current virtual console.
Now, with multi-tty support, it can do that.  (Emacsclient starts up
faster than vi!)

Some Gnus users (including me) run Gnus in an X frame in its own Emacs
instance, which they typically leave running for weeks.  It would be
nice if they could connect to this instance from a remote ssh session
and check their messages without opening a remote X frame or resorting
to gnus-slave.


25 26 27 28 29 30 31
WHO IS DOING IT
---------------

I'm Károly Lőrentey.  My address: lorentey@elte.hu.

Patches or suggestions are welcome!

32
Retrieving the latest version of the branch:
33 34

	tla register-archive lorentey@elte.hu--2004 http://lorentey.web.elte.hu/arch/2004/
35
	tla get lorentey@elte.hu--2004/emacs--multi-tty <directory>
36

37 38 39 40 41
(I use a recent arch development snapshot, but any of the released
versions of arch will do fine, I think.)

If you don't have arch, the branch has a homepage from which you can
download conventional patches against Emacs CVS HEAD:
42

43
	http://lorentey.web.elte.hu/project/emacs.html
44 45 46 47

STATUS
------

48 49 50 51
Multi-tty support is stable, I think most of the problems were fixed.
(It still needs testing on other architectures, though.)  Please let
me know if you find any bugs in it.  Emacsclient has been extended to
support opening a new terminal frame.
52

53
To try it out, compile and run the multi-tty branch with the following
Karoly Lorentey's avatar
Karoly Lorentey committed
54
commands:
55 56 57

   	mkdir +build
	cd +build
58
	../configure
59
	make bootstrap
60 61
	src/emacs -nw
	M-x server-start
62

63 64
and then (from a shell prompt on another terminal) start emacsclient
with
65

66
	lib-src/emacsclient -t /optional/file/names...
67

Karoly Lorentey's avatar
Karoly Lorentey committed
68
You'll hopefully have two fully working, independent frames on
69 70 71 72
separate terminals. The new frame is closed automatically when you
have finished editing the specified files (C-x #), but delete-frame
(C-x 5 0) also works.  Of course, you can create frames on more than
two tty devices.
73

74 75 76
Creating new frames on the same tty with C-x 5 2 works, and they
behave the same way as in previous Emacs versions.  If you exit emacs,
all terminals should be restored to their previous states.
77

78 79 80
This is work in progress, and probably full of bugs.  You should
always run emacs from gdb, so that you'll have a live instance to
debug if something goes wrong.  Please send me your reports.
Karoly Lorentey's avatar
Karoly Lorentey committed
81

82
Problems:
83

84 85 86 87 88 89 90 91 92 93 94 95 96
	* Suspending Emacs is disabled if there are multiple tty
	  devices.  Also, there is no way to suspend emacsclient. This
	  will be fixed.

	* X support is (I hope) working, but at the moment there are
	  problems with simultaneous X and tty devices, so don't do
	  that - start a separate Emacs with -nw and run the server
	  there.

	* Mac, Windows and DOS support is broken, probably doesn't
	  even compile -- this will be solved later.

	* Only tested on my GNU/Linux box.
97 98 99 100 101 102 103 104

NEWS
----

For the NEWS file:

** Support for multiple terminal devices has been added.  You can
   specify a terminal device (`tty' parameter) and a terminal type
105
   (`tty-type' parameter) to `make-terminal-frame'. `tty' must be a
106
   terminal device created by the updated emacsclient, or there will
Karoly Lorentey's avatar
Karoly Lorentey committed
107
   be problems with terminal input and window resizes.  
108 109 110 111 112 113

   You can test for the presence of multiple terminal support by
   testing for the `multi-tty' feature.

** A make-frame-on-tty function has been added to make it easier to
   create frames on new terminals.
114

115 116 117 118
** New functions: frame-tty-name, frame-tty-type for accessing
   terminal parameters, and delete-tty for closing the terminal
   device.

119 120
** Emacsclient has been extended to support opening a new terminal
   frame.
121 122 123 124 125 126

CHANGELOG
---------

See arch logs.

127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198
THINGS TO DO
------------

** Fix rif issue with X-tty combo sessions.  IMHO the best thing to do
   is to get rid of that global variable (and use the value value in
   display_method, which is guaranteed to be correct).

** Fix faces on tty frames during X-tty combo sessions.

** During an X-tty combo session, a (message "Hello") from a tty frame
   goes to the X frame.  Fix this.

** Find out the best way to support suspending Emacs with multiple
   ttys.  My guess: disable it on the controlling tty, but from other
   ttys pass it on to emacsclient somehow.  (It is (I hope) trivial to
   extend emacsclient to handle suspend/resume.  A `kill -STOP' almost
   works right now.)

** Move baud_rate to tty_output.

** Do tty output through term_hooks, like graphical display backends.

** Implement support for starting an interactive Emacs session without
   an initial frame.  (The user would connect to it and open frames
   later, with emacsclient.)  Not necessarily a good idea.

** Fix input from raw ttys (again).

** Fix Mac support (I can't do this myself).

** Fix W32 support (I can't do this myself).

** Fix DOS support (I can't do this myself).

** Do a grep on XXX and ?? for more issues.

** Understand Emacs's low-level input system (it seems complicated) :-)

** What does interrupt_input do?  I tried to disable it for raw
   secondary tty support, but it does not seem to do anything useful.
   (Update: Look again. X unconditionally enables this, maybe that's
   why raw terminal support is broken again.  I really do need to
   understand input.)

** Make sure C-g goes to the right frame.  This is hard, as SIGINT
   doesn't have a tty parameter. :-(

** I have seen a case when Emacs with multiple ttys fell into a loop
   eating 100% of CPU time.  Strace showed this loop:

	getpid()                                = 30284
	kill(30284, SIGIO)                      = 0
	--- SIGIO (I/O possible) @ 0 (0) ---
	ioctl(6, FIONREAD, [0])                 = -1 EIO (Input/output error)
	ioctl(5, FIONREAD, [0])                 = -1 EIO (Input/output error)
	ioctl(0, FIONREAD, [0])                 = 0
	sigreturn()                             = ? (mask now [])
	gettimeofday({1072842297, 747760}, NULL) = 0
	gettimeofday({1072842297, 747806}, NULL) = 0
	select(9, [0 3 5 6], NULL, NULL, {0, 0}) = 2 (in [5 6], left {0, 0})
	select(9, [0 3 5 6], NULL, NULL, {0, 0}) = 2 (in [5 6], left {0, 0})
	gettimeofday({1072842297, 748245}, NULL) = 0

   I have not been able to reproduce this.

** Define a output_initial value for output_method for the initial
   frame that is dumped with Emacs.  Checking for this frame (e.g. in
   cmd_error_internal) is ugly.

** emacsclient -t from an Emacs term buffer does not work, complains
   about face problems.  This can even lock up Emacs (if the recursive
   frame sets single_kboard).
199

200 201 202 203
DIARY OF CHANGES
----------------

(ex-TODO items with explanations.)
204

205
-- Introduce a new struct for terminal devices.  
206

207
   (Done, see struct tty_output.  The list of members is not yet
208 209 210 211 212 213 214 215 216 217
   complete.)

-- Change the bootstrap procedure to initialize tty_list.

   (Done, but needs review.)

-- Change make-terminal-frame to support specifying another tty.

   (Done, new frame parameters: `tty' and `tty-type'.)

218 219 220
-- Implement support for reading from multiple terminals.

   (Done, read_avail_input tries to read from each terminal, until one
221
   succeeds.  MULTI_KBOARD is not used.  Secondary terminals don't send
222
   SIGIO!)
223

224 225
   (Update: They do, now.)

226 227
   (Update2: After enabling X, they don't.)

228
-- other-frame should cycle through the frames on the `current'
229
   terminal only.  
230

231
   (Done, by trivially modifiying next_frame and prev_frame.)
232 233 234 235 236 237 238 239

-- Support different terminal sizes.
   
   (Done, no problem.)

-- Make sure terminal resizes are handled gracefully.  (Could be
   problematic.)

240 241
   (Done.  We don't get automatic SIGWINCH for additional ttys,
   though.)
242 243 244 245 246 247

-- Extend emacsclient to automatically open a new tty when it connects
   to Emacs.
   
   (Done.  It's an ugly hack, needs more work.)

248 249
-- Redisplay must refresh the topmost frame on *all* terminals, not
   just the initial terminal.
250
   
251
   (Done, but introduced an ugly redisplay problems.  Ugh.)
252

253 254
-- Fix redisplay problems.

255 256
   (Done; it turned out that the entire Wcm structure must be moved
   inside tty_output.  Why didn't I catch this earlier?)
257 258 259 260 261 262 263 264 265 266

-- Provide a way for emacsclient to tell Emacs that the tty has been
   resized.

   (Done, simply forward the SIGWINCH signal.)

-- Each keypress should automatically select the frame corresponding
   to the terminal that it was coming from.  This means that Emacs
   must know from which terminal the last keyboard event came from.

267 268
   (Done, it was quite simple, the input event system already
   supported multiple frames.)
269 270 271 272

-- Fix SIGIO issue with secondary terminals.

   (Done, emacsclient signals Emacs after writing to the proxy pseudo
273 274
   terminal.  Note that this means that multi-tty does not work with
   raw ttys!)
275

Karoly Lorentey's avatar
Karoly Lorentey committed
276 277 278
   (Update: This is bullshit.  There is a read_input_waiting function,
   extend that somehow.)

279 280 281 282
   (Update of update: The first update was not right either, extending
   read_input_waiting was not necessary.  Secondary ttys do seem to
   send signals on input.)

283 284
   (Update^3: Not any more.)

285 286 287 288 289 290 291 292 293 294
-- Make make-terminal-frame look up the `tty' and `tty-type' frame
   parameters from the currently selected terminal before the global
   default.

   (Done.)

-- Put all cached terminal escape sequences into struct tty_output.
   Currently, they are still stored in global variables, so we don't
   really support multiple terminal types.

295
   (Done.  It was not fun.)
296 297

-- Implement sane error handling after initialization.  (Currently
298 299 300
   emacs exits if you specify a bad terminal type.)  The helpful error
   messages must still be provided when Emacs starts.

301 302 303 304 305
   (Done.)

-- Implement terminal deletion, i.e., deleting local frames, closing
   the tty device and restoring its previous state without exiting
   Emacs.
306

307 308
   (Done, but at the moment only called when an error happens during
   initialization.  There is a memory corruption error around this
309
   somewhere.)  (Update: now it is fully enabled.)
310

311 312 313 314 315
-- Implement automatic deletion of terminals when the last frame on
   that terminal is closed.

   (Done.)

Karoly Lorentey's avatar
Karoly Lorentey committed
316 317 318 319 320 321 322
-- Restore tty screen after closing the terminal.

   (Done, we do the same as Emacs 21.2 for all terminals.)

-- 'TERM=dumb src/emacs' does not restore the terminal state.
   
   (Done.)
323

324 325 326 327 328 329 330 331
-- C-g should work on secondary terminals.

   (Done, but the binding is not configurable.)

-- Deal with SIGHUP in Emacs and in emacsclient.  (After this, the
   server-frames may be removed from server.el.)

   (Done, nothing to do.  It seems that Emacs does not receive SIGHUP
332
   from secondary ttys, which is actually a good thing.)  (Update: I
333
   think it would be a bad idea to remove server-frames.)
334

335
-- Change emacsclient/server.el to support the -t argument better,
336 337 338 339
   i.e. automatically close the socket when the frame is closed.

   (Seems to be working OK.)

340
-- Fix mysterious memory corruption error with tty deletion.  To
341 342 343 344 345 346
   trigger it, try the following shell command:

	while true; do TERM=no-such-terminal-definition emacsclient -h; done

   Emacs usually dumps core after a few dozen iterations.  (The bug
   seems to be related to the xfree()ing or bzero()ing of
347 348 349
   tty_output.Wcm.  Maybe there are outside references to struct Wcm?
   Why were these vars collected into a struct before multi-tty
   support?)
350

351 352 353 354 355 356 357
   (Done.  Whew.  It turned out that the problem had nothing to do
   with hypothetical external references to Wcm, or any other
   tty_output component; it was simply that delete_tty closed the
   filehandles of secondary ttys twice, resulting in fclose doubly
   free()ing memory.  Utterly trivial matter.  I love the C's memory
   management, it puts hair on your chest.)

358 359 360
-- Support raw secondary terminals.  (Note that SIGIO works only on
   the controlling terminal.) Hint: extend read_input_waiting() for
   multiple ttys and hopefully this will be fixed.
361

362 363 364 365 366
   (Done, it seems to have been working already for some time.  It
   seems F_SETOWN does work, after all.  Not sure what made it fail
   earlier, but it seems to be fixed (there were several changes
   around request_sigio, maybe one of them did it).
   read_input_waiting() is only used in sys_select(), don't change
367
   it.)  (Update: After adding X support, it's broken again.)
368

369
-- Find out why does Emacs abort when it wants to close its
Karoly Lorentey's avatar
Karoly Lorentey committed
370
   controlling tty.  Hint: chan_process[] array.  Hey, maybe
371 372
   noninterrupt-IO would work, too?  Update: no, there is no process
   for stdin/out.
Karoly Lorentey's avatar
Karoly Lorentey committed
373

374 375
   (Done.  Added add/delete_keyboard_wait_descriptor to
   term_init/delete_tty.  The hint was right, in a way.)
376

377
-- Issue with SIGIO: it needs to be disabled during redisplay.  See if
Karoly Lorentey's avatar
Karoly Lorentey committed
378 379
   fcntl() kernel behaviour could be emulated by emacsclient.

380
   (Done.  Simply disabled the SIGIO emulation hack in emacsclient.)
381
   (Update: it was added back.)
382

383
-- server.el: There are issues with saving files in buffers of closed
384 385 386 387 388
   clients.  Try editing a file with emacsclient -f, and (without
   saving it) do a delete-frame.  The frame is closed without
   question, and a surprising confirmation prompt appears in another
   frame.

389 390 391 392
   (Done.  delete-frame now asks for confirmation if it still has
   pending buffers, and modified buffers don't seem to be deleted.)

-- emacsclient.el, server.el: Handle eval or file open errors when
393
   doing -t.
394

395
   (Done.)
396

397 398
-- Make parts of struct tty_output accessible from Lisp.  The device
   name and the type is sufficient.
399

400 401 402
   (Done, see frame-tty-name and frame-tty-type.)

-- Export delete_tty to the Lisp environment, for emacsclient.
403

404 405
   (Done, see delete-tty.)

406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425
-- Get rid of the accessor macros in termchar.h, or define macros for
   all members.

   (Done.)

-- Move device-specific parameters (like costs) commonly used by
   device backends to a common, device-dependent structure.

   (Done.  See struct display_method in termhooks.h.)

-- Fix X support.

   (Done.  Well, it seems to be working.)

-- Allow simultaneous X and tty frames.  (Handling input could be
   tricky.  Or maybe not.)

   (Done.  Allowed, that is.  It is currently extremely unstable, to
   the point of being unusable.  The rif variable causes constant
   core dumps.  Handling input is indeed tricky.)
426

427
-- Rewrite multi-tty input in terms of MULTI_KBOARD.
428

429 430 431
   (Done.  In fact, there was no need to rewrite anything, I just
   added a kboard member to tty_display_info, and initialized the
   frame's kboard from there.)
432

433
;;; arch-tag: 8da1619e-2e79-41a8-9ac9-a0485daad17d