NEWS

GNU Emacs NEWS -- history of user-visible changes.

Copyright (C) 2010-2014 Free Software Foundation, Inc.
See the end of the file for license conditions.

Please send Emacs bug reports to bug-gnu-emacs@gnu.org.
If possible, use M-x report-emacs-bug.

This file is about changes in Emacs version 24.

See files NEWS.23, NEWS.22, NEWS.21, NEWS.20, NEWS.19, NEWS.18,
and NEWS.1-17 for changes in older Emacs versions.

You can narrow news to a specific version by calling `view-emacs-news'
with a prefix argument or by typing C-u C-h C-n.

Temporary note:
+++ indicates that all necessary documentation updates are complete.
    (This means all relevant manuals in doc/ AND lisp doc-strings.)
--- means no change in the manuals is needed.
When you add a new item, use the appropriate mark if you are sure it applies,
otherwise leave it unmarked.


* Installation Changes in Emacs 24.4

** Emacs can now be compiled with ACL support.
This happens by default if a suitable support library is found at
build time, like libacl on GNU/Linux.  To prevent this, use the
configure option `--disable-acl'.

** Emacs can now be compiled with file notification support.
This happens by default if a suitable system library is found at
build time.  To prevent this, use the configure option
`--without-file-notification'.  See below for file-notify features.
FIXME?  This feature is not available for the Nextstep port. (?)

---
** The configure option `--without-compress-info' has been generalized,
and renamed to `--without-compress-install'.  It now prevents compression
of _any_ files during installation.

---
** The configure option `--with-crt-dir' has been removed.
It is no longer needed, as the crt*.o files are no longer linked specially.

---
** Directories passed to configure option `--enable-locallisppath' are
no longer created during installation.

** Emacs can be compiled with zlib support.
If this library is present (which it normally is on most systems), the
function `zlib-decompress-region' becomes available, which can
decompress gzip- and zlib-format compressed data.

---
** Emacs for NS (Mac OS X, GNUstep) can be built with ImageMagick support.
This requires pkg-config to be available at configure time.


* Startup Changes in Emacs 24.4

+++
** When initializing `load-path', an empty element in the EMACSLOADPATH
environment variable (either leading, e.g., ":/foo"; trailing, e.g.,
"/foo:"; or embedded, e.g., "/foo::/bar") is replaced with the default
load-path (the one that would have been used if EMACSLOADPATH was unset).
This makes it easier to _extend_ the load-path via EMACSLOADPATH
(previously, EMACSLOADPATH had to specify the complete load-path,
including the defaults).  (In older versions of Emacs, an empty element
was replaced by ".", so use an explicit "." now if that is what you want.)

+++
** The -L option, which normally prepends its argument to load-path,
will instead append, if the argument begins with `:' (or `;' on MS Windows;
i.e., `path-separator').

+++
** If you use either site-load.el or site-init.el to customize the dumped
Emacs executable, any changes to `load-path' that these files make
will no longer be present after dumping.  To affect a permanent change
to `load-path', use the `--enable-locallisppath' option of `configure'.

+++
** The user option `initial-buffer-choice' can now specify a function
to set up the initial buffer.


* Changes in Emacs 24.4

+++
** New option `gnutls-verify-error', if non-nil, means that Emacs
should reject SSL/TLS certificates that GnuTLS determines as invalid.
(This option defaults to nil at present, but this is expected to change
in a future release.)

+++
** Emacs now supports menus on text-mode terminals.
If the terminal supports a mouse, clicking on the menu bar, or on
sensitive portions of the mode line or header line, will drop down the
menu defined at that position.  Likewise, clicking C-mouse-2 or
C-mouse-2 or C-mouse-3 on the text area will pop up the menus defined
for those locations.

If the text terminal does not support a mouse, you can activate the
first menu-bar menu by typing F10, which invokes `menu-bar-open'.

If you want the previous behavior, whereby F10 invoked `tmm-menubar',
customize the option `tty-menu-open-use-tmm' to a non-nil value.
(Typing M-` always invokes `tmm-menubar', even if `tty-menu-open-use-tmm'
is nil.)

+++
** The *Messages* buffer is created in `messages-buffer-mode',
a new major mode, with read-only status.  Any code that might create
the *Messages* buffer should call the function `messages-buffer' to do
so and set up the mode.

** Emacs now supports ACLs (access control lists).
+++
*** Emacs preserves the ACL entries of files when backing up.
+++
*** New functions `file-acl' and `set-file-acl' get and set the ACL
entries of a file.  On GNU/Linux, the POSIX ACL interface is used via
libacl.  On MS-Windows, the NT Security APIs are used to emulate the
POSIX ACL interfaces.

** Multi-monitor support has been added.

*** New functions `display-monitor-attributes-list' and
`frame-monitor-attributes' can be used to obtain information about
each physical monitor on multi-monitor setups.

*** The functions `display-pixel-width' and `display-pixel-height' now
behave consistently among the platforms: they return the pixel width
or height for all physical monitors associated with the given display
as if they were on X11.  To get information for each physical
monitor, use the new functions above.  Similar notes also apply to
`x-display-pixel-width', `x-display-pixel-height', `display-mm-width',
`display-mm-height', `x-display-mm-width', and `x-display-mm-height'.

+++
** The cursor stops blinking after 10 blinks (by default) on X and NS.
You can change the default by customizing `blink-cursor-blinks'.

+++
** In keymaps where SPC scrolls forward, S-SPC now scrolls backward.
This affects View mode, etc.

** Help changes

+++
*** The command `apropos-variable' is renamed to `apropos-user-option'.
`apropos-user-option' shows all user options while `apropos-variable'
shows all variables.  When called with a universal prefix argument,
the two commands swap their behaviors.  When `apropos-do-all' is
non-nil, they output the same results.

+++
*** The key `?' now describes prefix bindings, like `C-h'.

---
*** The command `describe-function' has been extended for EIEIO.
Running it on constructors will show a full description of the
generated class.  For generic functions, it will show all
implementations together with links to the source.  The old commands
`describe-class', `describe-constructor' and `describe-generic' were
removed.

---
*** The function `quail-help' is no longer an interactive command.
Use `C-h C-\' (`describe-input-method') instead.

** ImageMagick

+++
*** ImageMagick images now support the :max-width and :max-height keywords.

+++
*** When using `create-image' with image data, you can pass a :format
attribute (via the property-list argument) in order to help
ImageMagick detect the image type.  The value should be a MIME
content-type that is found in the new variable `image-format-suffixes'.

** Frame and window changes

+++
*** New commands `toggle-frame-fullscreen' and `toggle-frame-maximized',
bound to <f11> and M-<f10>, respectively.

+++
*** New hooks `focus-in-hook', `focus-out-hook'.
These are normal hooks run when an Emacs frame gains or loses input focus.

---
*** Emacs can now draw dividers between adjacent windows.
To put dividers between side-by-side/vertically stacked windows
customize the frame parameter `right-divider-width'/`bottom-divider-width'
to some positive integer.  You can drag dividers with the mouse
(they show a corresponding cursor when the mouse hovers over them).
You can change the appearance of dividers by customizing the faces
`window-divider', `window-divider-first-pixel', and
`window-divider-last-pixel'.  The last two are useful to provide a 3D
effect, or to better distinguish dividers from surrounding display objects.

---
*** `split-window' is now a non-interactive function, not a command.
As a command, it was a special case of `C-x 2' (`split-window-below'),
and as such superfluous.  After being reimplemented in Lisp, its
interactive form was mistakenly retained.

+++
*** New option `scroll-bar-adjust-thumb-portion'.
Available only on X, this option allows to control over-scrolling
using the scroll bar (i.e. dragging the thumb down even when the end
of the buffer is visible).

** Lisp evaluation changes
+++
*** `eval-defun' on an already defined defcustom calls the :set function,
if there is one.

+++
*** The commands `eval-expression' (`M-:'), `eval-last-sexp' (`C-x C-e'),
and `eval-print-last-sexp' (`C-j' in Lisp Interaction mode) can take a
zero prefix argument.  This disables truncation of lists in the output,
equivalent to setting `(eval-expression-)print-length' and
`(eval-expression-)print-level' to nil.  Additionally, it causes integers
to be printed in other formats (octal, hexadecimal, and character).

---
*** New hook `eval-expression-minibuffer-setup-hook' run by
`eval-expression' on entering the minibuffer.

---
** `write-region-inhibit-fsync' now defaults to t in batch mode.

+++
** `cache-long-line-scans' is now non-nil, and renamed to `cache-long-scans',
because it affects caching of paragraph scanning results as well.
There is no reason to set this to nil except for debugging purposes.

---
** The option `set-mark-default-inactive' has been deleted.
This unfinished feature was introduced by accident in Emacs 23.1;
simply disabling Transient Mark mode does the same thing.

---
** The default value of `comment-use-global-state' is now t,
and this variable has been marked obsolete.

---
** `emacs-bzr-version' has been renamed to `emacs-repository-version',
and works for git too, if you fetch the repository notes.

+++
** New option `load-prefer-newer' affects how the `load' function chooses
the file to load.  If this is non-nil, then when both .el and .elc
versions of a file exist, and the caller did not explicitly specify
which one to load, then the newer file is loaded.  The default, nil,
means to always load the .elc file.


* Editing Changes in Emacs 24.4

** Indentation changes

+++
*** The behavior of `C-x TAB' (`indent-rigidly') has changed.
When invoked without a prefix argument, it now activates a transient
mode in which typing <left>, <right>, <S-left>, and <S-right> adjusts
the text indentation in the region.  Typing any other key resumes
normal editing behavior.

*** `electric-indent-mode' is enabled by default.

+++
*** `tab-stop-list' is now implicitly extended to infinity by repeating
the last step.  Its default value is changed to nil, which means a tab
stop every `tab-width' columns.

+++
** New command `cycle-spacing' acts like a smarter `just-one-space'.
When called in succession, it cycles between spacing conventions:
one space, no spaces, original spacing.

+++
** The new function `fill-single-char-nobreak-p' can stop fill from breaking
a line after a one-letter word, which is an error in some typographical
conventions.  To use it, add it to the `fill-nobreak-predicate' hook.

+++
** Uniquify is enabled by default, with `post-forward-angle-brackets' style.

** New command `C-x SPC' (`rectangle-mark-mode') makes a rectangular region.
Most commands are still unaware of it, but kill/yank do work on the rectangle.

+++
** New option `visual-order-cursor-movement'.
If this is non-nil, cursor motion with arrow keys will follow the
visual order of characters on the screen: <left> always moves to the
left, <right> always moves to the right, disregarding the surrounding
bidirectional context.

** Register changes

+++
*** All interactive commands that read a register (`copy-to-register', etc.)
now display a temporary window after `register-preview-delay' seconds
that summarizes existing registers.  To disable this, set that option to nil.
Interactive commands that read registers and want to make use of this
should use `register-read-with-preview' to read register names.

*** New command `frameset-to-register' bound to `C-x r f', replacing
`frame-configuration-to-register'.  It offers similar functionality,
plus enhancements like the ability to restore deleted frames.
(`frame-configuration-to-register' still exists, but no longer has a
key binding.)

+++
*** New command `C-x C-k x' (`kmacro-to-register') stores keyboard
macros in registers.

+++
** New command `delete-duplicate-lines'.
This searches the region for identical lines, and removes all but one
copy of each repeated line.  The lines need not be sorted.


* Changes in Specialized Modes and Packages in Emacs 24.4

+++
** More packages look for ~/.emacs.d/<foo> additionally to ~/.<foo>.
Affected files:
~/.emacs.d/timelog	replaces  ~/.timelog
~/.emacs.d/vip		replaces  ~/.vip
~/.emacs.d/viper	replaces  ~/.viper
~/.emacs.d/ido.last	replaces  ~/.ido.last
~/.emacs.d/kkcrc	replaces  ~/.kkcrc
~/.emacs.d/quickurls	replaces  ~/.quickurls
~/.emacs.d/idlwave/	replaces  ~/.idlwave/
~/.emacs.d/bdfcache.el	replaces  ~/.bdfcache.el
~/.emacs.d/places	replaces  ~/.emacs-places
~/.emacs.d/shadows	replaces  ~/.shadows
~/.emacs.d/shadow_todo	replaces  ~/.shadow_todo
~/.emacs.d/strokes	replaces  ~/.strokes
~/.emacs.d/notes	replaces  ~/.notes
~/.emacs.d/type-break	replaces  ~/.type-break
Also the following files used by the now obsolete otodo-mode.el:
~/.emacs.d/todo-do	replaces  ~/.todo-do
~/.emacs.d/todo-done	replaces  ~/.todo-done
~/.emacs.d/todo-top	replaces  ~/.todo-top

** Backtrace and debugger

+++
*** New Lisp debugger command `v' (`debugger-toggle-locals') toggles the
display of local variables of the current stack frame.

*** The Lisp debugger's `e' command (`debugger-eval-expression') now includes
the lexical environment when evaluating the code in the context at point
(and so allows you to access lexical variables).

---
*** New minor mode `jit-lock-debug-mode' helps you debug code run via JIT Lock.

---
** Battery information can now be retrieved from BSD's `apm' utility.

---
** In the Buffer Menu, `M-s a C-o' shows matches for a regexp in marked buffers.

** Calendar and Diary

---
*** New faces `calendar-weekday-header', `calendar-weekend-header',
and `calendar-month-header'.

+++
*** New option `calendar-day-header-array'.

+++
*** New variable `diary-from-outlook-function', used by the command
`diary-from-outlook'.

---
*** The variable `calendar-font-lock-keywords' is obsolete.

** Calc

+++
*** Calc by default now uses the Gregorian calendar for all dates, and
uses January 1, 1 AD as its day number 1.  Previously Calc used the
Julian calendar for dates before September 14, 1752, and it used
December 31, 1 BC as its day number 1; the new scheme is more
consistent with Calendar's calendrical system and day numbering.

+++
*** The new option `calc-gregorian-switch' lets you configure if
(and when) Calc switches from the Julian to the Gregorian calendar.

+++
*** Support for ISO 8601 dates.

** CEDET

*** EDE

**** The cpp-root project now supports executing a compile command.
It can be set through the new :compile-command slot or the
buffer-local variable `compile-command'.

**** Better selection of include directories for the 'linux' project.
Include directories now support out-of-tree build directories and
target architecture auto-detection.

*** Semantic

**** Improved detection of used namespaces in current scope in C++.

**** Parsing of default values for variables and function arguments in C/C++.
They are also displayed by the summarize feature in the mode line.

**** Improved parsing of function pointers in C/C++.
This also includes parsing of function pointers as function arguments.

**** Parsing of C/C++ preprocessor macros that open new scope.
For example, this enables parsing of macros that open new namespaces.

**** Support for 'this' pointer in inline member functions in C++.

** cl-lib

+++
*** New macro `cl-tagbody'.
This executes statements while allowing for control transfer to labels.

+++
*** letf is now just an alias for cl-letf.

** CUA mode

+++
*** CUA mode now uses `delete-selection-mode' and `shift-select-mode'.
Hence, you can now enable it independently from those modes, and from
`transient-mark-mode'.

---
*** `cua-highlight-region-shift-only' is now obsolete.
You can disable `transient-mark-mode' to get the same result.

+++
*** CUA's rectangles can now be used without CUA by calling the command
`cua-rectangle-mark-mode'.

** CFEngine mode

---
*** Support for completion, ElDoc, and Flycheck has been added.

---
*** The current CFEngine syntax is parsed from "cf-promises -s json".
There is a fallback syntax available if you don't have cf-promises or
if your version doesn't support that option.  See option `cfengine-cf-promises'.

---
** Delete Selection mode can now be used without Transient Mark mode.

** Desktop

*** `desktop-auto-save-timeout' defines the number of seconds idle time
before auto-save of the desktop.

*** `desktop-restore-frames', enabled by default, allows saving and
restoring the frame/window configuration (frameset).  Additional options
`desktop-restore-in-current-display', `desktop-restore-reuses-frames'
and `desktop-restore-forces-onscreen' offer further customization.

+++
** New Dired minor mode `dired-hide-details-mode' toggles whether details,
such as file ownership or permissions, are visible.

---
** You can enable ElDoc inside the `eval-expression' minibuffer with:
  (add-hook 'eval-expression-minibuffer-setup-hook 'eldoc-mode)
The results display in the mode line.

** Electric Pair mode

+++
*** New option `electric-pair-preserve-balance', enabled by default.
If non-nil, pairing/skipping only kicks in when that help the balance
of parentheses and quotes, i.e. the buffer should end up at least as
balanced as before.

You can further control this behavior by adjusting the predicates
stored in `electric-pair-inhibit-predicate' and `electric-pair-skip-self'.

+++
*** New option `electric-pair-delete-adjacent-pairs', enabled by default.
In `electric-pair-mode', the commands `backward-delete-char' and
`backward-delete-char-untabify' are now bound to electric variants
that delete the closer when invoked between adjacent pairs.

+++
*** New option `electric-pair-open-newline-between-pairs', enabled by default.
In `electric-pair-mode', inserting a newline between adjacent pairs
opens an extra newline after point, which is indented if
`electric-indent-mode' is also set.

+++
*** New option `electric-pair-skip-whitespace', enabled by default.
This controls if skipping over closing delimiters should jump over any
whitespace slack.  Setting it to `chomp' makes it delete this
whitespace.  See also the variable `electric-pair-skip-whitespace-chars'.

---
*** New variables control the pairing in strings and comments.
You can customize `electric-pair-text-pairs' and
`electric-pair-text-syntax-table' to tweak pairing behavior inside
strings and comments.

+++
** New EPA option `epa-mail-aliases'.
You can set this to a list of email address aliases that `epa-mail-encrypt'
should use to find keys.

---
** New ERC option `erc-accidental-paste-threshold-seconds'.
If set to a number, this can be used to avoid accidentally pasting large
amounts of data into the ERC input.

+++
** New ERT macro `skip-unless' allows skipping ERT tests.
See the ERT manual for details.

** Eshell

+++
*** `eshell' now supports visual subcommands and options.
Eshell has been able to handle "visual" commands (interactive,
non-line oriented commands such as top that require display
capabilities not provided by eshell) by running them in an Emacs
terminal emulator.  See `eshell-visual-commands'.

This feature has been extended to subcommands and options that make a
usually line-oriented command a visual command.  Typical examples are
"git log" and "git <command> --help", which display their output in a
pager by default.  See `eshell-visual-subcommands' and
`eshell-visual-options'.

---
*** New Eshell-Tramp module.
External su and sudo commands are now the default; the internal,
Tramp-using variants can still be used by enabling the eshell-tramp
module.

---
** New F90 mode option `f90-smart-end-names'.

** Icomplete
Icomplete is now more similar to Ido.

---
*** Icomplete by default now applies to all forms of minibuffer completion.
The variable `icomplete-with-completion-tables' (now a user option)
controls this.  To restore the old behavior, set it back to
'(internal-complete-buffer).

+++
*** You can navigate through and select completions using the keys
from `icomplete-minibuffer-map'.

---
*** The string that separates potential completions is now a customizable
option (`icomplete-separator').  The default is " | " rather than ",".

---
*** New face `icomplete-first-match'; and new options
`icomplete-hide-common-prefix' and `icomplete-show-matches-on-no-input'.

---
*** The option `icomplete-show-key-bindings' has been removed.

** Ido

+++
*** An Ido user manual is now included.

---
*** The option `ido-use-virtual-buffers' can now take the value `auto'.
This means to use virtual buffers if the current ido input does not match
an existing buffer.

---
*** The variable `ido-decorations' can optionally have two new elements,
which are the brackets to use around the sole remaining completion.

** Image mode

+++
*** New commands `n' (`image-next-file') and `p' (`image-previous-file')
visit the next image file and the previous image file in the same
directory, respectively.

+++
*** New commands to show specific frames of multi-frame images.
`f' (`image-next-frame') and `b' (`image-previous-frame') visit the
next or previous frame.  `F' (`image-goto-frame') shows a specific frame.

+++
*** New commands to speed up, slow down, or reverse animation.
`a +' (`image-increase-speed') and `a -' (`image-decrease-speed') to
speed up and slow down the animation.  `a r' (`image-reverse-speed')
to reverse it and `a 0' (`image-reset-speed') to reset it.

---
*** The command `image-mode-fit-frame' deletes other windows.
When toggling, it restores the frame's previous window configuration.
It also has an optional frame argument, which can be used by Lisp
callers to fit the image to a frame other than the selected frame.

** Hi-Lock

+++
*** New global command `M-s h .' (`highlight-symbol-at-point') highlights
the symbol found near point.

+++
*** New option `hi-lock-auto-select-face'.  When non-nil, hi-lock commands
will cycle through faces in `hi-lock-face-defaults' without prompting.

** New Imenu option `imenu-generic-skip-comments-and-strings'.

** Info

---
*** New Info face `info-index-match', used to highlight matches in index
entries displayed by `Info-index-next', `Info-virtual-index' and
`info-apropos'.

---
*** The Info-edit command is obsolete.  Editing Info nodes by hand
has not been relevant for some time.

** JS Mode

---
*** New option `js-switch-indent-offset'.

---
*** Better indentation of multiple-variable declarations.
If a declaration spans several lines, variables on the following lines
are lined up to the first one.

---
*** Recognition and better indentation of continuations in array comprehensions.

+++
** MH-E has been updated to version 8.5 - see separate MH-E-NEWS file.

+++
** Octave mode

*** Font locking for texinfo comments and new keywords.

*** Completion in Octave file buffers.

*** ElDoc support.

*** Jump to definition.

*** Documentation lookup/search.

+++
** OPascal mode is the new name for Delphi mode

---
*** All delphi-* variables and functions have been renamed to opascal-*.
Obsolete aliases exist for those likely to have been used externally.

---
*** The option `delphi-newline-always-indents' has been removed.
Use `electric-indent-mode' instead.

---
*** The TAB key runs the standard `indent-for-tab-command', not `delphi-tab'.

** Package

+++
*** In the `list-packages' buffer, you can use `f' (`package-menu-filter')
to filter the list of packages by a keyword.

+++
*** In the `describe-package' buffer, there are now buttons listing the 
keywords related to the package.  Click on a button to see other packages
related to that keyword.

---
*** The format of `archive-contents' files, generated by package
repositories, has changed to allow a new (fifth) element in the data
vectors, containing an associative list with extra properties.
(For example, `describe-package' uses the `:url' extra property to
display a "Homepage" header.)

---
** In Prolog mode, `prolog-use-smie' has been removed,
along with the non-SMIE indentation code.

** Remember

*** The new command `remember-notes' creates a buffer that is saved on
`kill-emacs'.  You can think of it as a *scratch* buffer whose content
is preserved.  In fact, it was designed as a replacement for *scratch*
buffer and can be used that way by setting `initial-buffer-choice' to
`remember-notes' and `remember-notes-buffer-name' to "*scratch*".
Without the second change, the *scratch* buffer will still be there
for notes that do not need to be preserved.

*** The Remember package can now store notes in separates files.
You can use the new function `remember-store-in-files' within the
`remember-handler-functions' option.  See `remember-data-directory'
and `remember-directory-file-name-format' for new options related to
this function.

** Rmail

*** Customize `rmail-mbox-format' to influence some minor aspects of
how Rmail displays non-MIME messages.

---
*** The `unrmail' command now converts from BABYL to mboxrd format,
rather than mboxo.  Customize `unrmail-mbox-format' to change this.

** Ruby mode

---
*** Improved syntax highlighting and indentation.

---
*** New `electric-indent-mode' integration.

---
*** New option `ruby-encoding-magic-comment-style'.

---
*** New option `ruby-custom-encoding-magic-comment-template'.

---
*** New option `ruby-align-to-stmt-keywords'.

---
*** New option `ruby-align-chained-calls'.

---
*** More Ruby file types have been added to `auto-mode-alist'.

** Search and Replace

+++
*** New global command `M-s .' (`isearch-forward-symbol-at-point')
starts a symbol (identifier) incremental search forward with the
symbol found near point added to the search string initially.

+++
*** `C-x 8 RET' in Isearch mode reads a character by its Unicode name
and adds it to the search string.

*** `M-s i' in Isearch mode toggles the variable `isearch-invisible'
between nil and the value of the option `search-invisible' (or `open'
when it's nil).

*** `query-replace' skips invisible text when `search-invisible' is nil,
and opens overlays with hidden text when `search-invisible' is `open'.

+++
*** A negative prefix arg of replacement commands replaces backward.
`M-- M-%' replaces a string backward, `M-- C-M-%' replaces a regexp
backward, `M-s w words M-- M-%' replaces a sequence of words backward.

+++
*** By default, prefix arguments do not now terminate Isearch mode.
Set `isearch-allow-prefix' to nil to restore old behavior.

+++
*** More Isearch commands accept prefix arguments, namely
`isearch-printing-char', `isearch-quote-char', `isearch-yank-word',
`isearch-yank-line'.

+++
*** Word search now matches whitespace at the beginning/end
of the search string if it contains leading/trailing whitespace.
In an incremental word search or when using a non-nil LAX argument
of `word-search-regexp', the lax matching can also match part of
the first word (in addition to the lax matching of the last word).
The same rules are now applied to the symbol search with the difference
that it matches symbols, and non-symbol characters between symbols.

+++
** New SES command `ses-rename-cell' allows assignment of names to SES cells.

---
** The shell.el option `explicit-bash-args' includes --noediting by default.
All non-ancient Bash versions support this option.

** Shell Script mode

---
*** The SMIE indentation engine is now used by default - see `sh-use-smie'