INSTALL 30 KB
Newer Older
1
GNU Emacs Installation Guide
Paul Eggert's avatar
Paul Eggert committed
2
Copyright (C) 1992, 1994, 1996-1997, 2000-2017 Free Software Foundation,
Paul Eggert's avatar
Paul Eggert committed
3
Inc.
4 5 6 7
See the end of the file for license conditions.


This file contains general information on building GNU Emacs.
8
For more information specific to the MS-Windows, GNUstep/macOS, and
9
MS-DOS ports, also read the files nt/INSTALL, nextstep/INSTALL, and
10
msdos/INSTALL.  For information about building from a repository checkout
11
(rather than a release), also read the file INSTALL.REPO.
12 13 14 15


BASIC INSTALLATION

16
On most Unix systems, you build Emacs by first running the 'configure'
17 18 19 20 21 22
shell script.  This attempts to deduce the correct values for
various system-dependent variables and features, and find the
directories where certain system headers and libraries are kept.
In a few cases, you may need to explicitly tell configure where to
find some things, or what options to use.

23 24 25
'configure' creates a 'Makefile' in several subdirectories, and a
'src/config.h' file containing system-dependent definitions.
Running the 'make' utility then builds the package for your system.
26

Glenn Morris's avatar
Glenn Morris committed
27
Building Emacs requires GNU make, <http://www.gnu.org/software/make/>.
28
On most systems that Emacs supports, this is the default 'make' program.
Glenn Morris's avatar
Glenn Morris committed
29

30
Here's the procedure to build Emacs using 'configure' on systems which
31 32 33 34 35 36
are supported by it.  In some cases, if the simplified procedure fails,
you might need to use various non-default options, and maybe perform
some of the steps manually.  The more detailed description in the other
sections of this guide will help you do that, so please refer to those
sections if you need to.

37
  1. Unpacking the Emacs 25 release requires about 200 MB of free
Glenn Morris's avatar
Glenn Morris committed
38 39
  disk space.  Building Emacs uses about another 200 MB of space.
  The final installed Emacs uses about 150 MB of disk space.
40 41 42
  This includes the space-saving that comes from automatically
  compressing the Lisp source files on installation.

43 44
  2a. 'cd' to the directory where you unpacked Emacs and invoke the
      'configure' script:
45 46 47 48

		 ./configure

  2b. Alternatively, create a separate directory, outside the source
49
      directory, where you want to build Emacs, and invoke 'configure'
50 51 52 53 54 55
      from there:

		 SOURCE-DIR/configure

      where SOURCE-DIR is the top-level Emacs source directory.

56
  3. When 'configure' finishes, it prints several lines of details
57 58 59 60 61
     about the system configuration.  Read those details carefully
     looking for anything suspicious, such as wrong CPU and operating
     system names, wrong places for headers or libraries, missing
     libraries that you know are installed on your system, etc.

62
     If you find anything wrong, you may have to pass to 'configure'
63 64 65 66
     one or more options specifying the explicit machine configuration
     name, where to find various headers and libraries, etc.
     Refer to the section DETAILED BUILDING AND INSTALLATION below.

67
     If 'configure' didn't find some image support libraries, such as
68
     Xpm and jpeg, refer to "Image support libraries" below.
69

70 71
     If the details printed by 'configure' don't make any sense to
     you, but there are no obvious errors, assume that 'configure' did
72 73
     its job and proceed.

74
  4. Invoke the 'make' program:
75 76 77

		 make

78 79
  5. If 'make' succeeds, it will build an executable program 'emacs'
     in the 'src' directory.  You can try this program, to make sure
80 81 82 83
     it works:

		 src/emacs -Q

84
  6. Assuming that the program 'src/emacs' starts and displays its
85 86 87 88 89 90 91 92 93 94 95 96 97
     opening screen, you can install the program and its auxiliary
     files into their installation directories:

		 make install

  You are now ready to use Emacs.  If you wish to conserve disk space,
  you may remove the program binaries and object files from the
  directory where you built Emacs:

		 make clean

  You can delete the entire build directory if you do not plan to
  build Emacs again, but it can be useful to keep for debugging.
98 99 100 101
  If you want to build Emacs again with different configure options,
  first clean the source directories:

		make distclean
102 103

  Note that the install automatically saves space by compressing
104
  (provided you have the 'gzip' program) those installed Lisp source (.el)
105 106 107 108 109 110 111
  files that have corresponding .elc versions, as well as the Info files.


ADDITIONAL DISTRIBUTION FILES

* Complex Text Layout support libraries

112 113 114 115 116
On GNU and Unix systems, Emacs needs the optional libraries "m17n-db",
"libm17n-flt", "libotf" to correctly display such complex scripts as
Indic and Khmer, and also for scripts that require Arabic shaping
support (Arabic and Farsi).  On some systems, particularly GNU/Linux,
these libraries may be already present or available as additional
117
packages.  Note that if there is a separate 'dev' or 'devel' package,
118 119 120
for use at compilation time rather than run time, you will need that
as well as the corresponding run time package; typically the dev
package will contain header files and a library archive.  Otherwise,
Glenn Morris's avatar
Glenn Morris committed
121
you can download the libraries from <http://www.nongnu.org/m17n/>.
122

123 124 125
Note that Emacs cannot support complex scripts on a TTY, unless the
terminal includes such a support.

126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145
* intlfonts-VERSION.tar.gz

The intlfonts distribution contains X11 fonts in various encodings
that Emacs can use to display international characters.  If you see a
non-ASCII character appear as a hollow box, that means you don't have
a font for it.  You might find one in the intlfonts distribution.  If
you do have a font for a non-ASCII character, but some characters
don't look right, or appear improperly aligned, a font from the
intlfonts distribution might look better.

The fonts in the intlfonts distribution are also used by the ps-print
package for printing international characters.  The file
lisp/ps-mule.el defines the *.bdf font files required for printing
each character set.

The intlfonts distribution contains its own installation instructions,
in the intlfonts/README file.

* Image support libraries

146 147
Emacs needs libraries to display images, with the exception of PBM and
XBM images whose support is built-in.
148 149

On some systems, particularly on GNU/Linux, these libraries may
150
already be present or available as additional packages.  If
151
there is a separate 'dev' or 'devel' package, for use at compilation
152 153 154
time rather than run time, you will need that as well as the
corresponding run time package; typically the dev package will
contain header files and a library archive.  Otherwise, you can
155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171
download and build libraries from sources.  Although none of them are
essential for running Emacs, some are important enough that
'configure' will report an error if they are absent from a system that
has X11 support, unless 'configure' is specifically told to omit them.

Here's a list of some of these libraries, and the URLs where they
can be found (in the unlikely event that your distribution does not
provide them).  By default, libraries marked with an X are required if
X11 is being used.

    libXaw3d          http://directory.fsf.org/project/xaw3d/
  X libxpm for XPM:   http://www.x.org/releases/current/src/lib/
  X libpng for PNG:   http://www.libpng.org/
    libz (for PNG):   http://www.zlib.net/
  X libjpeg for JPEG: http://www.ijg.org/
  X libtiff for TIFF: http://www.remotesensing.org/libtiff/
  X libgif for GIF:   http://sourceforge.net/projects/giflib/
172
    librsvg2 for SVG: http://wiki.gnome.org/action/show/Projects/LibRsvg
173 174 175 176 177 178 179 180

If you supply the appropriate --without-LIB option, 'configure' will
omit the corresponding library from Emacs, even if that makes for a
less-pleasant user interface.  Otherwise, Emacs will configure itself
to build with these libraries if 'configure' finds them on your
system, and 'configure' will complain and exit if a library marked 'X'
is not found on a system that uses X11.  Use --without-LIB if your
version of a library won't work because some routines are missing.
181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197

* Extra fonts

The Emacs distribution does not include fonts and does not install
them.

On the GNU system, Emacs supports both X fonts and local fonts
(i.e. fonts managed by the fontconfig library).  If you need more
fonts than your distribution normally provides, you must install them
yourself.  See <URL:http://www.gnu.org/software/freefont/> for a large
number of free Unicode fonts.

* GNU/Linux development packages

Many GNU/Linux systems do not come with development packages by default;
they include the files that you need to run Emacs, but not those you
need to compile it.  For example, to compile Emacs with support for X
198
and graphics libraries, you may need to install the X development
199 200 201 202 203 204
package(s), and development versions of the jpeg, png, etc. packages.

The names of the packages that you need varies according to the
GNU/Linux distribution that you use, and the options that you want to
configure Emacs with.  On Debian-based systems, you can install all the
packages needed to build the installed version of Emacs with a command
205 206
like 'apt-get build-dep emacs24'.  On Red Hat systems, the
corresponding command is 'yum-builddep emacs'.
207 208 209 210


DETAILED BUILDING AND INSTALLATION:

211
(This is for a Unix or Unix-like system.  For GNUstep and macOS,
212 213
see nextstep/INSTALL.  For non-ancient versions of MS Windows, see
the file nt/INSTALL.  For MS-DOS and MS Windows 3.X, see msdos/INSTALL.)
214

Glenn Morris's avatar
Glenn Morris committed
215
1) See the basic installation summary above for the disk space requirements.
216

217 218 219
2) In the unlikely event that 'configure' does not detect your system
type correctly, consult './etc/MACHINES' to see what --host, --build
options you should pass to 'configure'.  That file also offers hints
220 221 222 223 224 225
for getting around some possible installation problems.

3) You can build Emacs in the top-level Emacs source directory
or in a separate directory.

3a) To build in the top-level Emacs source directory, go to that
226
directory and run the program 'configure' as follows:
227 228 229

    ./configure [--OPTION[=VALUE]] ...

230
If 'configure' cannot determine your system type, try again
231 232
specifying the proper --build, --host options explicitly.

233 234
If you don't want X support, specify '--with-x=no'.  If you omit this
option, 'configure' will try to figure out for itself whether your
235 236
system has X, and arrange to use it if present.

237
The '--x-includes=DIR' and '--x-libraries=DIR' options tell the build
238
process where the compiler should look for the include files and
239
object libraries used with the X Window System.  Normally, 'configure'
240 241 242 243 244
is able to find them; these options are necessary if you have your X
Window System files installed in unusual places.  These options also
accept a list of directories, separated with colons.

To get more attractive menus, you can specify an X toolkit when you
245 246 247
configure Emacs; use the option '--with-x-toolkit=TOOLKIT', where
TOOLKIT is 'gtk' (the default), 'athena', or 'motif' ('yes' and
'lucid' are synonyms for 'athena').  Compiling with Motif causes a
248 249 250 251
standard File Selection Dialog to pop up when you invoke file commands
with the mouse.  You can get fancy 3D-style scroll bars, even without
Gtk or Motif, if you have the Xaw3d library installed (see
"Image support libraries" above for Xaw3d availability).
252

253
You can tell configure where to search for GTK by giving it the
254
argument PKG_CONFIG='/full/name/of/pkg-config'.
255

256 257 258
Emacs will autolaunch a D-Bus session bus, when the environment
variable DISPLAY is set, but no session bus is running.  This might be
inconvenient for Emacs when running as daemon or running via a remote
Glenn Morris's avatar
Glenn Morris committed
259
ssh connection.  In order to completely prevent the use of D-Bus, configure
260
Emacs with the options '--without-dbus --without-gconf --without-gsettings'.
261

262 263 264
The Emacs mail reader RMAIL is configured to be able to read mail from
a POP3 server by default.  Versions of the POP protocol older than
POP3 are not supported.  For Kerberos-authenticated POP add
265
'--with-kerberos', for Hesiod support add '--with-hesiod'.  While POP3
266 267 268 269 270
is always enabled, whether Emacs actually uses POP is controlled by
individual users--see the Rmail chapter of the Emacs manual.

For image support you may have to download, build, and install the
appropriate image support libraries for image types other than XBM and
271
PBM, see the list of URLs in "Image support libraries" above.
272 273 274 275 276 277
(Note that PNG support requires libz in addition to libpng.)

To disable individual types of image support in Emacs for some reason,
even though configure finds the libraries, you can configure with one
or more of these options:

278 279 280 281 282 283 284
  --without-xpm          for XPM image support
  --without-jpeg         for JPEG image support
  --without-tiff         for TIFF image support
  --without-gif          for GIF image support
  --without-png          for PNG image support
  --without-rsvg         for SVG image support
  --without-imagemagick  for Imagemagick support
285

286
Use --without-toolkit-scroll-bars to disable Motif or Xaw3d scroll bars.
287 288 289 290 291 292 293 294 295

Use --without-xim to inhibit the default use of X Input Methods.
In this case, the X resource useXIM can be used to turn on use of XIM.

Use --disable-largefile to omit support for files larger than 2GB on
systems which support that.

Use --without-sound to disable sound support.

296 297 298 299
Use --without-all for a smaller executable with fewer dependencies on
external libraries, at the cost of disabling many features.  Although
--without-all disables libraries not needed for ordinary Emacs
operation, it does enable X support, and using the GTK2 or GTK3
300 301 302 303 304
toolkit creates a lot of library dependencies.  So if you want to
build a small executable with very basic X support, use --without-all
--with-x-toolkit=no.  For the smallest possible executable without X,
use --without-all --without-x.  If you want to build with just a few
features enabled, you can combine --without-all with --with-FEATURE.
305 306
For example, you can use --without-all --without-x --with-dbus to
build with DBus support and nothing more.
307

Paul Eggert's avatar
Paul Eggert committed
308 309 310 311
Use --with-wide-int to implement Emacs values with the type 'long long',
even on hosts where a narrower type would do.  With this option, on a
typical 32-bit host, Emacs integers have 62 bits instead of 30.

312 313
Use --with-cairo to compile Emacs with Cairo drawing.

314 315 316
Use --with-modules to build Emacs with support for loading dynamic
modules.

317 318 319 320
Use --enable-gcc-warnings to enable compile-time checks that warn
about possibly-questionable C code.  This is intended for developers
and is useful with GNU-compatible compilers.  On a recent GNU system
there should be no warnings; on older and on non-GNU systems the
321 322 323 324 325
generated warnings may still be useful, though you may prefer
configuring with --enable-gcc-warnings=warn-only so they are not
treated as errors.  The default is --enable-gcc-warnings=warn-only if
it appears to be a developer build, and is --disable-gcc-warnings
otherwise.
326

327 328 329
Use --disable-silent-rules to cause 'make' to give more details about
the commands it executes.  This can be helpful when debugging a build
that goes awry.  'make V=1' also enables the extra chatter.
330

331 332
Use --enable-link-time-optimization to enable link-time optimizer.  If
you're using GNU compiler, this feature is supported since version 4.5.0.
333
If 'configure' can determine number of online CPUS on your system, final
334 335 336 337
link-time optimization and code generation is executed in parallel using
one job per each available online CPU.

This option is also supported for clang.  You should have GNU binutils
338
with 'gold' linker and plugin support, and clang with LLVMgold.so plugin.
339 340 341
Read http://llvm.org/docs/GoldPlugin.html for details.  Also note that
this feature is still experimental, so prepare to build binutils and
clang from the corresponding source code repositories.
342

343 344
The '--prefix=PREFIXDIR' option specifies where the installation process
should put emacs and its data files.  This defaults to '/usr/local'.
345
- Emacs (and the other utilities users run) go in PREFIXDIR/bin
346
  (unless the '--exec-prefix' option says otherwise).
347
- The architecture-independent files go in PREFIXDIR/share/emacs/VERSION
348
  (where VERSION is the version number of Emacs, like '23.2').
349 350 351
- The architecture-dependent files go in
  PREFIXDIR/libexec/emacs/VERSION/CONFIGURATION
  (where CONFIGURATION is the configuration name, like
352
  i686-pc-linux-gnu), unless the '--exec-prefix' option says otherwise.
353

354
The '--exec-prefix=EXECDIR' option allows you to specify a separate
355 356 357 358 359 360 361 362 363 364 365 366 367 368
portion of the directory tree for installing architecture-specific
files, like executables and utility programs.  If specified,
- Emacs (and the other utilities users run) go in EXECDIR/bin, and
- The architecture-dependent files go in
  EXECDIR/libexec/emacs/VERSION/CONFIGURATION.
EXECDIR/bin should be a directory that is normally in users' PATHs.

For example, the command

    ./configure --build=i386-linux-gnu --without-sound

configures Emacs to build for a 32-bit GNU/Linux distribution,
without sound support.

369
'configure' doesn't do any compilation or installation itself.
370
It just creates the files that influence those things:
371 372 373 374 375 376 377 378 379 380 381 382 383 384 385
'./Makefile' in the top-level directory and several subdirectories;
and './src/config.h'.

When it is done, 'configure' prints a description of what it did and
creates a shell script 'config.status' which, when run, recreates the
same configuration.  If 'configure' exits with an error after
disturbing the status quo, it removes 'config.status'.  'configure'
also creates a file 'config.cache' that saves the results of its tests
to make reconfiguring faster, and a file 'config.log' containing compiler
output (useful mainly for debugging 'configure').  You can give
'configure' the option '--cache-file=FILE' to use the results of the
tests in FILE instead of 'config.cache'.  Set FILE to '/dev/null' to
disable caching, for debugging 'configure'.

If the description of the system configuration printed by 'configure'
386
is not right, or if it claims some of the features or libraries are not
387 388
available when you know they are, look at the 'config.log' file for
the trace of the failed tests performed by 'configure' to check
389 390 391 392 393 394 395
whether these features are supported.  Typically, some test fails
because the compiler cannot find some function in the system
libraries, or some macro-processor definition in the system headers.

Some tests might fail because the compiler should look in special
directories for some header files, or link against optional
libraries, or use special compilation options.  You can force
396
'configure' and the build process which follows it to do that by
397
setting the variables CPPFLAGS, CFLAGS, LDFLAGS, LIBS, CPP and CC
398
before running 'configure'.  CPP is the command which invokes the
399 400 401 402 403
preprocessor, CPPFLAGS lists the options passed to it, CFLAGS are
compilation options, LDFLAGS are options used when linking, LIBS are
libraries to link against, and CC is the command which invokes the
compiler.  By default, gcc is used if available.

404
Here's an example of a 'configure' invocation, assuming a Bourne-like
405 406
shell such as Bash, which uses these variables:

407 408 409
  ./configure \
    CPPFLAGS='-I/foo/myinclude' LDFLAGS='-L/bar/mylib' \
    CFLAGS='-O3' LIBS='-lfoo -lbar'
410

411 412
(this is all one shell command).  This tells 'configure' to instruct the
preprocessor to look in the '/foo/myinclude' directory for header
413
files (in addition to the standard directories), instruct the linker
414
to look in '/bar/mylib' for libraries, pass the -O3 optimization
415 416 417
switch to the compiler, and link against libfoo and libbar
libraries in addition to the standard ones.

418
For some libraries, like Gtk+, fontconfig and ALSA, 'configure' uses
419 420
pkg-config to find where those libraries are installed.
If you want pkg-config to look in special directories, you have to set
421 422
PKG_CONFIG_PATH to point to the directories where the .pc-files for
those libraries are.  For example:
423

424 425
  ./configure \
    PKG_CONFIG_PATH='/usr/local/alsa/lib/pkgconfig:/opt/gtk+-2.8/lib/pkgconfig'
426 427

3b) To build in a separate directory, go to that directory
428
and run the program 'configure' as follows:
429 430 431 432

    SOURCE-DIR/configure CONFIGURATION-NAME [--OPTION[=VALUE]] ...

SOURCE-DIR refers to the top-level Emacs source directory which is
433 434
where Emacs's configure script is located.  'configure' looks for the
Emacs source code in the directory that 'configure' is in.
435

436
4) Put into './lisp/site-init.el' or './lisp/site-load.el' any Emacs
Glenn Morris's avatar
Glenn Morris committed
437 438 439 440 441
Lisp code you want Emacs to load before it is dumped out.  Use
site-load.el for additional libraries if you arrange for their
documentation strings to be in the etc/DOC file (see
src/Makefile.in if you wish to figure out how to do that).  For all
else, use site-init.el.  Do not load byte-compiled code which
442
was built with a non-nil value of 'byte-compile-dynamic'.
Glenn Morris's avatar
Glenn Morris committed
443 444 445 446 447

It is not a good idea to edit the normal .el files that come with Emacs.
Instead, use a file like site-init.el to change settings.

To change the value of a variable that is already defined in Emacs,
448
you should use the Lisp function 'setq', not 'defvar'.  For example,
449 450 451 452 453 454 455 456 457 458 459

     (setq news-inews-program "/usr/bin/inews")

is how you would override the default value of the variable
news-inews-program.

Before you override a variable this way, *look at the value* that the
variable gets by default!  Make sure you know what kind of value the
variable should have.  If you don't pay attention to what you are
doing, you'll make a mistake.

460
The 'site-*.el' files are nonexistent in the distribution.  You do not
461 462
need to create them if you have nothing to put in them.

463
5) Refer to the file './etc/TERMS' for information on fields you may
464 465
wish to add to various termcap entries.  (This is unlikely to be necessary.)

466
6) Run 'make' in the top directory of the Emacs distribution to finish
467
building Emacs in the standard way.  The final executable file is
468
named 'src/emacs'.  You can execute this file "in place" without
469 470 471 472
copying it, if you wish; then it automatically uses the sibling
directories ../lisp, ../lib-src, ../info.

Or you can "install" the executable and the other files into their
473
installed locations, with 'make install'.  By default, Emacs's files
474 475
are installed in the following directories:

476 477
'/usr/local/bin' holds the executable programs users normally run -
		'emacs', 'etags', 'ctags', 'emacsclient'.
478

479 480 481
'/usr/local/share/emacs/VERSION/lisp' holds the Emacs Lisp library;
		'VERSION' stands for the number of the Emacs version
		you are installing, like '23.1' or '23.2'.  Since the
482 483 484 485 486 487
		Lisp library changes from one version of Emacs to
		another, including the version number in the path
		allows you to have several versions of Emacs installed
		at the same time; in particular, you don't have to
		make Emacs unavailable while installing a new version.

488
'/usr/local/share/emacs/VERSION/etc' holds the Emacs tutorial, the DOC
489 490 491
		file, and other architecture-independent files Emacs
		might need while running.

492
'/usr/local/libexec/emacs/VERSION/CONFIGURATION-NAME' contains executable
493 494
		programs used by Emacs that users are not expected to
		run themselves.
495 496 497
		'VERSION' is the number of the Emacs version you are
		installing, and 'CONFIGURATION-NAME' is the value
		deduced by the 'configure' program to identify the
498
		architecture and operating system of your machine,
499
		like 'i686-pc-linux-gnu' or 'sparc-sun-sunos'.  Since
500 501 502 503 504 505 506 507
		these files are specific to the version of Emacs,
		operating system, and architecture in use, including
		the configuration name in the path allows you to have
		several versions of Emacs for any mix of machines and
		operating systems installed at the same time; this is
		useful for sites at which different kinds of machines
		share the file system Emacs is installed on.

508
'/usr/local/share/info' holds the on-line documentation for Emacs,
509 510 511 512
		known as "info files".  Many other GNU programs are
		documented using info files as well, so this directory
		stands apart from the other, Emacs-specific directories.

513 514
'/usr/local/share/man/man1' holds the man pages for the programs installed
		in '/usr/local/bin'.
515 516 517 518

Any version of Emacs, whether installed or not, also looks for Lisp
files in these directories.

519
'/usr/local/share/emacs/VERSION/site-lisp' holds the local Emacs Lisp
520 521
		files installed for Emacs version VERSION only.

522
'/usr/local/share/emacs/site-lisp' holds the local Emacs Lisp
523 524 525
		files installed for all Emacs versions.

		When Emacs is installed, it searches for its Lisp files
526 527 528
		in '/usr/local/share/emacs/VERSION/site-lisp', then in
		'/usr/local/share/emacs/site-lisp', and finally in
		'/usr/local/share/emacs/VERSION/lisp'.
529 530 531

If these directories are not what you want, you can specify where to
install Emacs's libraries and data files or where Emacs should search
532 533
for its Lisp files by giving values for 'make' variables as part of
the command.  See the section below called 'MAKE VARIABLES' for more
534 535
information on this.

536
7) Check the file 'dir' in your site's info directory (usually
537 538 539
/usr/local/share/info) to make sure that it has a menu entry for the
Emacs info files.

Glenn Morris's avatar
Glenn Morris committed
540
8) If your system uses lock files to interlock access to mailer inbox files,
541 542 543
then you might need to make the movemail program setuid or setgid
to enable it to write the lock files.  We believe this is safe.

Glenn Morris's avatar
Glenn Morris committed
544
9) You are done!  You can remove executables and object files from
545 546 547
the build directory by typing 'make clean'.  To also remove the files
that 'configure' created (so you can compile Emacs for a different
configuration), type 'make distclean'.
548 549 550 551 552


MAKE VARIABLES

You can change where the build process installs Emacs and its data
553
files by specifying values for 'make' variables as part of the 'make'
554 555 556 557
command line.  For example, if you type

    make install bindir=/usr/local/gnubin

558 559 560
the 'bindir=/usr/local/gnubin' argument indicates that the Emacs
executable files should go in '/usr/local/gnubin', not
'/usr/local/bin'.
561 562 563

Here is a complete list of the variables you may want to set.

564
'bindir' indicates where to put executable programs that users can
565 566
	run.  This defaults to /usr/local/bin.

567
'datadir' indicates where to put the architecture-independent
568 569
	read-only data files that Emacs refers to while it runs; it
	defaults to /usr/local/share.  We create the following
570 571 572 573 574
	subdirectories under 'datadir':
	- 'emacs/VERSION/lisp', containing the Emacs Lisp library, and
	- 'emacs/VERSION/etc', containing the tutorials, DOC file, etc.
	'VERSION' is the number of the Emacs version you are installing,
	like '23.1' or '23.2'.  Since these files vary from one version
575 576 577 578 579
	of Emacs to another, including the version number in the path
	allows you to have several versions of Emacs installed at the
	same time; this means that you don't have to make Emacs
	unavailable while installing a new version.

580 581 582 583
'libexecdir' indicates where to put architecture-specific data files that
	Emacs refers to as it runs; it defaults to '/usr/local/libexec'.
	We create the following subdirectories under 'libexecdir':
	- 'emacs/VERSION/CONFIGURATION-NAME', containing executable
584 585
		programs used by Emacs that users are not expected to run
		themselves.
586 587 588 589
	'VERSION' is the number of the Emacs version you are installing,
	and 'CONFIGURATION-NAME' is the value deduced by the
	'configure' program to identify the architecture and operating
	system of your machine, like 'i686-pc-linux-gnu' or 'sparc-sun-sunos'.
590 591 592 593 594 595 596 597
	Since these files are specific to the version of Emacs,
	operating system, and architecture in use, including the
	configuration name in the path allows you to have several
	versions of Emacs for any mix of machines and operating
	systems installed at the same time; this is useful for sites
	at which different kinds of machines share the file system
	Emacs is installed on.

598 599
'infodir' indicates where to put the info files distributed with
	Emacs; it defaults to '/usr/local/share/info'.
600

601 602 603
'mandir' indicates where to put the man pages for Emacs and its
	utilities (like 'etags'); it defaults to
	'/usr/local/share/man/man1'.
604

605
'prefix' doesn't give a path for any specific part of Emacs; instead,
606
	its value is used to determine the defaults for all the
607 608 609
	architecture-independent path variables - 'datadir',
	'sharedstatedir', 'infodir', and 'mandir'.  Its default value is
	'/usr/local'; the other variables add on 'lib' or 'man' to it
610 611 612
	by default.

	For example, suppose your site generally places GNU software
613
	under '/usr/users/software/gnusoft' instead of '/usr/local'.
614
	By including
615 616
	    'prefix=/usr/users/software/gnusoft'
	in the arguments to 'make', you can instruct the build process
617 618 619
	to place all of the Emacs data files in the appropriate
	directories under that path.

620
'exec_prefix' serves the same purpose as 'prefix', but instead
621
	determines the default values for the architecture-dependent
622
	path variables - 'bindir' and 'libexecdir'.
623 624

The above variables serve analogous purposes in the makefiles for all
Paul Eggert's avatar
Paul Eggert committed
625
GNU software; the following variables are specific to Emacs.
626

627
'archlibdir' indicates where Emacs installs and expects the executable
628
	files and other architecture-dependent data it uses while
629 630
	running.  Its default value, based on 'libexecdir' (which
	see), is '/usr/local/libexec/emacs/VERSION/CONFIGURATION-NAME'
631 632
	(where VERSION and CONFIGURATION-NAME are as described above).

633
'GZIP_PROG' is the name of the executable that compresses installed info,
Paul Eggert's avatar
Paul Eggert committed
634 635 636
	manual, and .el files.  It defaults to gzip.  Setting it to
	the empty string suppresses compression.

637
Remember that you must specify any variable values you need each time
638 639
you run 'make' in the top directory.  If you run 'make' once to build
emacs, test it, and then run 'make' again to install the files, you
640
must provide the same variable settings each time.  To make the
641 642 643
settings persist, you can edit them into the 'Makefile' in the top
directory, but be aware that running the 'configure' program erases
'Makefile' and rebuilds it from 'Makefile.in'.
644 645 646 647

The path for finding Lisp files is specified in src/epaths.h,
a file which is generated by running configure.  To change the path,
you can edit the definition of PATH_LOADSEARCH in that file
648
before you run 'make'.
649 650 651 652 653 654 655 656

The top-level Makefile stores the variable settings it used in the
Makefiles for the subdirectories, so you don't have to specify them
when running make in the subdirectories.


PROBLEMS

657
See the file './etc/PROBLEMS' for a list of various problems sometimes
658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673
encountered, and what to do about them.

This file is part of GNU Emacs.

GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.