Commit 067d23c9 authored by Katsumi Yamaoka's avatar Katsumi Yamaoka

Restore files that I seem to have mistakenly deleted.

parent 19b9c467
If you think you may have found a bug in GNU Emacs, please read the
Bugs section of the Emacs manual for advice on
(1) how to tell when to report a bug, and
(2) how to write a useful bug report and what information it needs to have.
You can read the read the Bugs section of the manual from inside Emacs.
Start Emacs, do C-h i to enter Info, then m Emacs RET to get to the
Emacs manual, then m Bugs RET to get to the section on bugs.
Or you can use the standalone Info program in a like manner.
(Standalone Info is part of the Texinfo distribution, not part of the
Emacs distribution.)
Printed copies of the Emacs manual can be purchased from the Free
Software Foundation's online store at <http://shop.fsf.org/>.
If necessary, you can read the manual without an info program:
cat info/emacs* | more "+/^File: emacs, Node: Bugs,"
Please first check the file etc/PROBLEMS (e.g. with C-h C-p in Emacs) to
make sure it isn't a known issue.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Free Software Foundation, Inc.
See the end of the file for license conditions.
Building and Installing Emacs from Bazaar
If this is the first time you go through it, you'll need to configure
before bootstrapping:
$ ./configure
Some of the files that are included in the Emacs tarball, such as
byte-compiled Lisp files, are not stored in Bazaar. Therefore, to
build from Bazaar you must run "make bootstrap" instead of just "make":
$ bzr pull
$ make bootstrap
Normally, it is not necessary to use "make bootstrap" after every
update from Bazaar. "make" should work in 90% of the cases and be
much quicker.
$ make
(If you want to install the Emacs binary, type "make install" instead
of "make" in the last command.)
Occasionally the file "lisp/loaddefs.el" (and similar automatically
generated files, such as esh-groups.el, and *-loaddefs.el in some
subdirectories of lisp/, e.g. mh-e/ and calendar/) will need to be
updated to reflect new autoloaded functions. If you see errors (rather
than warnings) about undefined lisp functions during compilation, that
may be the reason. Finally, sometimes there can be build failures
related to *loaddefs.el (e.g. "required feature `esh-groups' was not
provided"). In that case, follow the instructions below.
To update loaddefs.el (and similar files), do:
$ cd lisp
$ make autoloads
If either of the above partial procedures fails, try "make bootstrap".
If CPU time is not an issue, the most thorough way to rebuild, and
avoid any spurious problems, is always to use this method.
Users of non-Posix systems (MS-Windows etc.) should run the
platform-specific configuration scripts (nt/configure.bat, config.bat,
etc.) before "make bootstrap" or "make"; the rest of the procedure is
applicable to those systems as well.
Because the Bazaar version of Emacs is a work in progress, it will
sometimes fail to build. Please wait a day or so (and check the bug
and development mailing list archives) before reporting such problems.
In most cases, the problem is known about and is just waiting for
someone to fix it.
This file is part of GNU Emacs.
GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
This diff is collapsed.
Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
2010 Free Software Foundation, Inc.
See the end of the file for license conditions.
This directory tree holds version 24.0.50 of GNU Emacs, the extensible,
customizable, self-documenting real-time display editor.
The file INSTALL in this directory says how to build and install GNU
Emacs on various systems, once you have unpacked or checked out the
entire Emacs file tree.
See the file etc/NEWS for information on new features and other
user-visible changes in recent versions of Emacs.
The file etc/PROBLEMS contains information on many common problems that
occur in building, installing and running Emacs.
You may encounter bugs in this release. If you do, please report
them; your bug reports are valuable contributions to the FSF, since
they allow us to notice and fix problems on machines we don't have, or
in code we don't use often. Please send bug reports to the mailing
list bug-gnu-emacs@gnu.org. If possible, use M-x report-emacs-bug.
See the "Bugs" section of the Emacs manual for more information on how
to report bugs. (The file `BUGS' in this directory explains how you
can find and read that section using the Info files that come with
Emacs.) See `etc/MAILINGLISTS' for more information on mailing lists
relating to GNU packages.
The `etc' subdirectory contains several other files, named in capital
letters, which you might consider looking at when installing GNU
Emacs.
The file `configure' is a shell script to acclimate Emacs to the
oddities of your processor and operating system. It creates the file
`Makefile' (a script for the `make' program), which automates the
process of building and installing Emacs. See INSTALL for more
detailed information.
The file `configure.in' is the input used by the autoconf program to
construct the `configure' script. Since Emacs has some configuration
requirements that autoconf can't meet directly, and for historical
reasons, `configure.in' uses an unholy marriage of custom-baked
configuration code and autoconf macros. If you want to rebuild
`configure' from `configure.in', you will need to install a recent
version of autoconf and GNU m4.
The file `Makefile.in' is a template used by `configure' to create
`Makefile'.
The file `make-dist' is a shell script to build a distribution tar
file from the current Emacs tree, containing only those files
appropriate for distribution. If you make extensive changes to Emacs,
this script will help you distribute your version to others.
There are several subdirectories:
`src' holds the C code for Emacs (the Emacs Lisp interpreter and
its primitives, the redisplay code, and some basic editing
functions).
`lisp' holds the Emacs Lisp code for Emacs (most everything else).
`leim' holds the library of Emacs input methods, Lisp code and
auxiliary data files required to type international characters
which can't be directly produced by your keyboard.
`lib-src' holds the source code for some utility programs for use by or
with Emacs, like movemail and etags.
`etc' holds miscellaneous architecture-independent data files Emacs
uses, like the tutorial text and tool bar images.
The contents of the `lisp', `leim', `info', and `doc'
subdirectories are architecture-independent too.
`info' holds the Info documentation tree for Emacs.
`doc/emacs' holds the source code for the Emacs Manual. If you modify the
manual sources, you will need the `makeinfo' program to produce
an updated manual. `makeinfo' is part of the GNU Texinfo
package; you need a suitably recent version of Texinfo.
`doc/lispref' holds the source code for the Emacs Lisp reference manual.
`doc/lispintro' holds the source code for the Introduction to Programming
in Emacs Lisp manual.
`msdos' holds configuration files for compiling Emacs under MSDOG.
`nextstep' holds instructions and some other files for compiling the
Nextstep port of Emacs, for GNUstep and Mac OS X Cocoa.
`nt' holds various command files and documentation files that pertain
to building and running Emacs on Windows 9X/ME/NT/2000/XP.
`test' holds tests for various aspects of Emacs's functionality.
Building Emacs on non-Posix platforms requires tools that aren't part
of the standard distribution of the OS. The platform-specific README
files and installation instructions should list the required tools.
This file is part of GNU Emacs.
GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
#!/bin/sh
echo "Please read INSTALL.BZR for instructions on how to build Emacs from Bazaar."
# Exit with failure, since people may have generic build scripts that
# try things like "autogen.sh && ./configure && make".
exit 1
# arch-tag: a123408c-fada-4bf7-98a0-a786cff918f0
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
#! /bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd="$stripprog"
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
true
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
else
instcmd=mkdir
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
then
true
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
true
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
true
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
true
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
true
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
exit 0
...@@ -121,7 +121,7 @@ Emacs has been idle for IDLE `gnus-demon-timestep's." ...@@ -121,7 +121,7 @@ Emacs has been idle for IDLE `gnus-demon-timestep's."
;; If t, replace by 1 ;; If t, replace by 1
(time (cond ((eq time t) (time (cond ((eq time t)
gnus-demon-timestep) gnus-demon-timestep)
((null time) nil) ((null time))
(t (* time gnus-demon-timestep)))) (t (* time gnus-demon-timestep))))
(timer (timer
(cond (cond
......
This diff is collapsed.
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
scriptversion=2006-05-11.19
# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
# Created: 1993-05-16
# Public domain.
#
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
nl='
'
IFS=" "" $nl"
errstatus=0
dirmode=
usage="\
Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
Create each directory DIR (with mode MODE, if specified), including all
leading file name components.
Report bugs to <bug-automake@gnu.org>."
# process command line arguments
while test $# -gt 0 ; do
case $1 in
-h | --help | --h*) # -h for help
echo "$usage"
exit $?
;;
-m) # -m PERM arg
shift
test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
dirmode=$1
shift
;;
--version)
echo "$0 $scriptversion"
exit $?
;;
--) # stop option processing
shift
break
;;
-*) # unknown option
echo "$usage" 1>&2
exit 1
;;
*) # first non-opt arg
break
;;
esac
done
for file
do
if test -d "$file"; then
shift
else
break
fi
done
case $# in
0) exit 0 ;;
esac
# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
# mkdir -p a/c at the same time, both will detect that a is missing,
# one will create a, then the other will try to create a and die with
# a "File exists" error. This is a problem when calling mkinstalldirs
# from a parallel make. We use --version in the probe to restrict
# ourselves to GNU mkdir, which is thread-safe.
case $dirmode in
'')
if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
echo "mkdir -p -- $*"
exec mkdir -p -- "$@"
else
# On NextStep and OpenStep, the `mkdir' command does not
# recognize any option. It will interpret all options as
# directories to create, and then abort because `.' already
# exists.
test -d ./-p && rmdir ./-p
test -d ./--version && rmdir ./--version
fi
;;
*)
if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
test ! -d ./--version; then
echo "mkdir -m $dirmode -p -- $*"
exec mkdir -m "$dirmode" -p -- "$@"
else
# Clean up after NextStep and OpenStep mkdir.
for d in ./-m ./-p ./--version "./$dirmode";
do
test -d $d && rmdir $d
done
fi
;;
esac
for file
do
case $file in
/*) pathcomp=/ ;;
*) pathcomp= ;;
esac
oIFS=$IFS
IFS=/
set fnord $file
shift
IFS=$oIFS
for d
do
test "x$d" = x && continue
pathcomp=$pathcomp$d
case $pathcomp in
-*) pathcomp=./$pathcomp ;;
esac
if test ! -d "$pathcomp"; then
echo "mkdir $pathcomp"
mkdir "$pathcomp" || lasterr=$?
if test ! -d "$pathcomp"; then
errstatus=$lasterr
else
if test ! -z "$dirmode"; then
echo "chmod $dirmode $pathcomp"
lasterr=
chmod "$dirmode" "$pathcomp" || lasterr=$?
if test ! -z "$lasterr"; then
errstatus=$lasterr
fi
fi
fi
fi
pathcomp=$pathcomp/
done
done
exit $errstatus
#!/bin/sh
if
test -r $2
then
if
cmp $1 $2 > /dev/null
then
echo $2 is unchanged
rm -f $1
else
mv -f $1 $2
fi
else
mv -f $1 $2
fi
#!/bin/sh
# Write into $1/subdirs.el a list of subdirs of directory $1.
# Copyright (C) 1994, 1995, 1997, 1999, 2001, 2002, 2003, 2004, 2005,
# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
# This file is part of GNU Emacs.
# GNU Emacs is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.