Skip to content

GitLab

Commit 478ebb73 authored by Kenichi Handa's avatar Kenichi Handa
Browse files

merge trunk

parents 2b25da45 b7bd8478
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 245 additions and 781 deletions
ChangeLog
View file @ 478ebb73
2010-05-27 Glenn Morris <rgm@gnu.org>
* config.bat: Do not preprocess src/Makefile.in.
* configure.in: Do not preprocess src/Makefile.in.
(cpp_undefs, CPP_NEED_TRADITIONAL): Remove.
(AC_EGREP_CPP): Test no longer needed.
* make-dist: No more Makefile.c files.
2010-05-26 Glenn Morris <rgm@gnu.org>
* configure.in (YMF_PASS_LDFLAGS): Remove.
(PRE_EDIT_LDFLAGS, POST_EDIT_LDFLAGS): New output variables.
* configure.in (CPPFLAGS, CFLAGS, REAL_CFLAGS):
Add $GNUSTEP_LOCAL_HEADERS.
(LDFLAGS, LD_SWITCH_SYSTEM_TEMACS): Add $GNUSTEP_LOCAL_LIBRARIES.
* configure.in (NS_IMPL_GNUSTEP_INC, NS_IMPL_GNUSTEP_TEMACS_LDFLAGS)
(GNUSTEP_MAKEFILES): Remove.
(LD_SWITCH_SYSTEM_TEMACS): Move NS_IMPL_GNUSTEP_TEMACS_LDFLAGS
stuff to here.
2010-05-25 Glenn Morris <rgm@gnu.org>
* configure.in (LD_SWITCH_SYSTEM): Move some gnu-linux stuff...
......
INSTALL
View file @ 478ebb73
GNU Emacs Installation Guide
Copyright (C) 1992, 1994, 1996, 1997, 2000, 2001, 2002, 2003, 2004,
2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
2005, 2006, 2007, 2008, 2009, 2010
Free Software Foundation, Inc.
See the end of the file for license conditions.
......@@ -686,8 +687,8 @@ when running make in the subdirectories.
CONFIGURATION BY HAND
Instead of running the `configure' program, you have to perform the
following steps.
This should not be necessary and is not recommended. Instead of
running the `configure' program, you have to perform the following steps.
1) Copy `./src/config.in' to `./src/config.h'.
......@@ -701,22 +702,15 @@ the appropriate system and architecture description files.
2) Edit `./src/config.h' to set the right options for your system. If
you need to override any of the definitions in the s/*.h and m/*.h
files for your system and machine, do so by editing config.h, not by
changing the s/*.h and m/*.h files. Occasionally you may need to
redefine parameters used in `./lib-src/movemail.c'.
changing the s/*.h and m/*.h files.
3) Create src/Makefile and lib-src/Makefile from the corresponding
`Makefile.in' files. First copy `Makefile.in' to `Makefile.c',
then edit in appropriate substitutions for the @...@ constructs,
and then copy the shell commands near the end of `configure'
that run cpp to construct `Makefile'.
4) Create `Makefile' files in various other directories
from the corresponding `Makefile.in' files. This isn't so hard,
just a matter of substitution.
3) Create `Makefile' files in various directories from the
corresponding `Makefile.in' files. This isn't so hard, just a matter
of editing in appropriate substitutions for the @...@ constructs.
The `configure' script is built from `configure.in' by the `autoconf'
program. You need version 2.51 or newer of `autoconf' to rebuild
`configure'.
program. You need at least the version of autoconf specified in the
AC_PREREQ(...) command to rebuild `configure' from `configure.in'.
BUILDING GNU EMACS BY HAND
......
admin/ChangeLog
View file @ 478ebb73
2010-05-27 Glenn Morris <rgm@gnu.org>
* quick-install-emacs (AVOID): No more Makefile.c files.
* notes/cpp: Remove file.
2010-05-15 Ken Raeburn <raeburn@raeburn.org>
* admin.el (set-version, set-copyright): Update emacs.c instead of
......
admin/notes/cpp deleted 100644 → 0
View file @ 2b25da45
ttn 2003-04-09
we use a C preprocesor not only in the normal compilation of .c files
into object files, but also for creating src/Makefile.
(delimited by comment "start of cpp stuff"). some cpp implementations
insert whitespace in between tokens.
during makefile creation, the preprocessor symbol NOT_C_CODE is defined.
this should not be defined for normal .c file compilation.
there has been discussion on eliminating this use of cpp and relying
solely on autoconf processing. rms says to leave it be.
;;; arch-tag: d654291e-9fc8-41b7-ab0c-d3cde842a8e0
admin/quick-install-emacs
View file @ 478ebb73
#!/bin/sh
### quick-install-emacs --- do a halfway-decent job of installing emacs quickly
## Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
## Free Software Foundation, Inc.
## Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
## 2010 Free Software Foundation, Inc.
## Author: Miles Bader <miles@gnu.org>
......@@ -31,7 +31,7 @@
PUBLIC_LIBSRC_BINARIES='b2m emacsclient etags ctags ebrowse'
PUBLIC_LIBSRC_SCRIPTS='grep-changelog rcs-checkin'
AVOID="CVS -DIC README COPYING ChangeLog ~ [.]orig$ [.]rej$ Makefile$ Makefile.in$ Makefile.c$ makefile$ makefile.w32-in$ stamp-subdir [.]cvsignore [.]arch-ids [{]arch[}] [.][cho]$ make-docfile testfile test-distrib"
AVOID="CVS -DIC README COPYING ChangeLog ~ [.]orig$ [.]rej$ Makefile$ Makefile.in$ makefile$ makefile.w32-in$ stamp-subdir [.]cvsignore [.]arch-ids [{]arch[}] [.][cho]$ make-docfile testfile test-distrib"
# Prune old binaries lying around in the source tree
PRUNE=no
......
config.bat
View file @ 478ebb73
......@@ -190,11 +190,10 @@ rem On my system dir.h gets in the way. It's a VMS file so who cares.
if exist dir.h ren dir.h vmsdir.h
rem Create "makefile" from "makefile.in".
rm -f Makefile junk.c junk2.c
sed -e "1,/== start of cpp stuff ==/s@^##*[ ].*$@@" <Makefile.in >junk.c
copy junk.c + deps.mk junk2.c
gcc -E -traditional junk2.c | sed -f ../msdos/sed1v2.inp >Makefile
rm -f junk.c junk2.c
rm -f Makefile makefile.tmp
copy Makefile.in + deps.mk makefile.tmp
sed -f ../msdos/sed1v2.inp <makefile.tmp >Makefile
rm -f makefile.tmp
if "%X11%" == "" goto src5
mv Makefile makefile.tmp
......
configure
View file @ 478ebb73
......@@ -720,8 +720,6 @@ DEPFLAGS
XMKMF
LD_SWITCH_X_SITE_AUX
LD_SWITCH_X_SITE_AUX_RPATH
NS_IMPL_GNUSTEP_INC
NS_IMPL_GNUSTEP_TEMACS_LDFLAGS
TEMACS_LDFLAGS2
NS_OBJ
NS_SUPPORT
......@@ -820,7 +818,8 @@ CYGWIN_OBJ
PRE_ALLOC_OBJ
POST_ALLOC_OBJ
LD_SWITCH_SYSTEM_TEMACS
YMF_PASS_LDFLAGS
PRE_EDIT_LDFLAGS
POST_EDIT_LDFLAGS
LINKER
LIB_GCC
MOUSE_SUPPORT
......@@ -9935,8 +9934,6 @@ fi
HAVE_NS=no
NS_IMPL_COCOA=no
NS_IMPL_GNUSTEP=no
NS_IMPL_GNUSTEP_INC=
NS_IMPL_GNUSTEP_TEMACS_LDFLAGS=
tmp_CPPFLAGS="$CPPFLAGS"
tmp_CFLAGS="$CFLAGS"
CPPFLAGS="$CPPFLAGS -x objective-c"
......@@ -9955,22 +9952,18 @@ if test "${with_ns}" != no; then
ns_appbindir=${ns_appdir}
ns_appresdir=${ns_appdir}Resources
ns_appsrc=${srcdir}/nextstep/GNUstep/Emacs.base
GNUSTEP_MAKEFILES="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_MAKEFILES)"
GNUSTEP_SYSTEM_HEADERS="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_SYSTEM_HEADERS)"
GNUSTEP_SYSTEM_HEADERS="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_SYSTEM_HEADERS)"
GNUSTEP_SYSTEM_LIBRARIES="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_SYSTEM_LIBRARIES)"
## Pull in stuff from GNUstep-make.
## FIXME? Cleaner to use AC_SUBST_FILE for this?
NS_IMPL_GNUSTEP_INC="FOUNDATION_LIB=gnu
GUI_LIB=gnu
include $GNUSTEP_MAKEFILES/Additional/base.make
include $GNUSTEP_MAKEFILES/Additional/gui.make
shared=no
"
NS_IMPL_GNUSTEP_TEMACS_LDFLAGS="-L${GNUSTEP_SYSTEM_LIBRARIES} -lgnustep-gui -lgnustep-base -lobjc \${CONFIG_SYSTEM_LIBS} -lpthread"
CPPFLAGS="$CPPFLAGS -I${GNUSTEP_SYSTEM_HEADERS}"
CFLAGS="$CFLAGS -I${GNUSTEP_SYSTEM_HEADERS}"
REAL_CFLAGS="$REAL_CFLAGS -I${GNUSTEP_SYSTEM_HEADERS}"
LDFLAGS="$LDFLAGS -L${GNUSTEP_SYSTEM_LIBRARIES}"
GNUSTEP_LOCAL_HEADERS="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_LOCAL_HEADERS)"
GNUSTEP_LOCAL_LIBRARIES="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_LOCAL_LIBRARIES)"
test "x${GNUSTEP_LOCAL_HEADERS}" != "x" && \
GNUSTEP_LOCAL_HEADERS="-I${GNUSTEP_LOCAL_HEADERS}"
test "x${GNUSTEP_LOCAL_LIBRARIES}" != "x" && \
GNUSTEP_LOCAL_LIBRARIES="-L${GNUSTEP_LOCAL_LIBRARIES}"
CPPFLAGS="$CPPFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
CFLAGS="$CFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
REAL_CFLAGS="$REAL_CFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
LDFLAGS="$LDFLAGS -L${GNUSTEP_SYSTEM_LIBRARIES} ${GNUSTEP_LOCAL_LIBRARIES}"
LIB_STANDARD=
START_FILES=
TEMACS_LDFLAGS2=
......@@ -10162,8 +10155,6 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
 
 
ns_frag=/dev/null
NS_OBJ=
NS_SUPPORT=
......@@ -26634,6 +26625,11 @@ case "$opsys" in
*) LD_SWITCH_SYSTEM_TEMACS= ;;
esac
 
if test "$NS_IMPL_GNUSTEP" = "yes"; then
LD_SWITCH_SYSTEM_TEMACS="${LD_SWITCH_SYSTEM_TEMACS} -L${GNUSTEP_SYSTEM_LIBRARIES} ${GNUSTEP_LOCAL_LIBRARIES} -lgnustep-gui -lgnustep-base -lobjc -lpthread"
fi
 
 
LINKER=
......@@ -26660,11 +26656,9 @@ case "$opsys" in
;;
esac
 
## A macro which other sections of Makefile can redefine to munge the
## flags before they are passed to LD. This is helpful if you have
## redefined LD to something odd, like "gcc".
## (The YMF prefix is a holdover from the old name "ymakefile".)
YMF_PASS_LDFLAGS=flags
PRE_EDIT_LDFLAGS=
POST_EDIT_LDFLAGS=
if test "x$ORDINARY_LINK" = "xyes"; then
 
LINKER="\$(CC)"
......@@ -26692,21 +26686,23 @@ elif test "x$GCC" = "xyes" && test "x$LINKER" = "x"; then
## shell''s ``for'' construct. Note that sane people do not have '.' in
## their paths, so we must use ./prefix-args.
## TODO either make prefix-args check ORDINARY_LINK internally,
## or remove it altogether (bug#6184), removing the need for this macro.
YMF_PASS_LDFLAGS='`./prefix-args -Xlinker flags`'
## or remove it altogether (bug#6184), removing the need for this hack.
PRE_EDIT_LDFLAGS='`./prefix-args -Xlinker'
POST_EDIT_LDFLAGS='`'
fi
 
 
test "x$LINKER" = "x" && LINKER=ld
## FIXME? What setting of YMF_PASS_LDFLAGS should this have?
## FIXME? What setting of EDIT_LDFLAGS should this have?
test "$NS_IMPL_GNUSTEP" = "yes" && LINKER="\$(CC) -rdynamic"
 
 
 
 
## FIXME? The logic here is not precisely the same as that above
## setting YMF_PASS_LDFLAGS. There is no check here for a pre-defined
## LINKER. Should we only be setting LIB_GCC if LD ~ -nostdlib?
## FIXME? The logic here is not precisely the same as that above.
## There is no check here for a pre-defined LINKER.
## Should we only be setting LIB_GCC if LD ~ -nostdlib?
LIB_GCC=
if test "x$GCC" = "xyes" && test "x$ORDINARY_LINK" != "xyes"; then
 
......@@ -26852,42 +26848,7 @@ test "${prefix}" != NONE &&
test "${exec_prefix}" != NONE &&
exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'`
 
# Now get this: Some word that is part of the ${srcdir} directory name
# or the ${configuration} value might, just might, happen to be an
# identifier like `sun4' or `i386' or something, and be predefined by
# the C preprocessor to some helpful value like 1, or maybe the empty
# string. Needless to say consequent macro substitutions are less
# than conducive to the makefile finding the correct directory.
# src/Makefile.in used to treat X11 as equivalent to HAVE_X11.
# But nothing in Emacs defines X11, and everywhere else uses HAVE_X11,
# so that cannot have been doing anything.
cpp_undefs="`echo $srcdir $configuration $canonical unix mktime register X11 |
sed -e 's/[^a-zA-Z0-9_]/ /g' -e 's/^/ /' -e 's/ *$//' \
-e 's/ */ -U/g' -e 's/-U[0-9][^ ]*//g'`"
## Check if the C preprocessor will convert `..' to `. .'. If so, set
## CPP_NEED_TRADITIONAL to `yes' so that the code to generate Makefile
## from Makefile.c can correctly provide the arg `-traditional' to the
## C preprocessor.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
yes..yes
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
$EGREP "yes..yes" >/dev/null 2>&1; then
CPP_NEED_TRADITIONAL=no
else
CPP_NEED_TRADITIONAL=yes
fi
rm -f conftest*
ac_config_files="$ac_config_files Makefile lib-src/Makefile oldXMenu/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispintro/Makefile doc/lispref/Makefile src/Makefile.c:src/Makefile.in lwlib/Makefile lisp/Makefile leim/Makefile"
ac_config_files="$ac_config_files Makefile lib-src/Makefile oldXMenu/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispintro/Makefile doc/lispref/Makefile src/Makefile lwlib/Makefile lisp/Makefile leim/Makefile"
 
ac_config_commands="$ac_config_commands default"
 
......@@ -27474,7 +27435,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
#
# INIT-COMMANDS
#
GCC="$GCC" NON_GNU_CPP="$NON_GNU_CPP" CPP="$CPP" CPP_NEED_TRADITIONAL="$CPP_NEED_TRADITIONAL" CPPFLAGS="$CPPFLAGS" cpp_undefs="$cpp_undefs"
GCC="$GCC" NON_GNU_CPP="$NON_GNU_CPP" CPP="$CPP" CPPFLAGS="$CPPFLAGS"
 
_ACEOF
 
......@@ -27492,7 +27453,7 @@ do
"doc/misc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/misc/Makefile" ;;
"doc/lispintro/Makefile") CONFIG_FILES="$CONFIG_FILES doc/lispintro/Makefile" ;;
"doc/lispref/Makefile") CONFIG_FILES="$CONFIG_FILES doc/lispref/Makefile" ;;
"src/Makefile.c") CONFIG_FILES="$CONFIG_FILES src/Makefile.c:src/Makefile.in" ;;
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
"lwlib/Makefile") CONFIG_FILES="$CONFIG_FILES lwlib/Makefile" ;;
"lisp/Makefile") CONFIG_FILES="$CONFIG_FILES lisp/Makefile" ;;
"leim/Makefile") CONFIG_FILES="$CONFIG_FILES leim/Makefile" ;;
......@@ -28158,35 +28119,9 @@ for dir in etc lisp ; do
test -d ${dir} || mkdir ${dir}
done
 
# Build src/Makefile from ${srcdir}/src/Makefile.c
# This must be done after src/config.h is built, since we rely on that file.
echo creating src/epaths.h
${MAKE-make} epaths-force
 
# As of 2000-11-19, newest development versions of GNU cpp preprocess
# `..' to `. .' unless invoked with -traditional
if test "x$GCC" = xyes && test "x$CPP_NEED_TRADITIONAL" = xyes; then
CPPFLAGS="$CPPFLAGS -traditional"
fi
echo creating src/Makefile
( cd src
rm -f junk.c junk1.c junk2.c
sed -e '/start of cpp stuff/q' \
< Makefile.c > junk1.c
sed -e '1,/start of cpp stuff/d'\
-e 's,/\*\*/#\(.*\)$,/* \1 */,' \
< Makefile.c > junk.c
$CPP -P $cpp_undefs -I. -I$srcdir/src $CPPFLAGS junk.c | \
sed -e 's/^ / /' -e '/^#/d' -e '/^[ ]*$/d' > junk2.c
cat junk1.c junk2.c > Makefile.new
rm -f junk.c junk1.c junk2.c
chmod 444 Makefile.new
mv -f Makefile.new Makefile
)
if test ! -f src/.gdbinit && test -f $srcdir/src/.gdbinit; then
echo creating src/.gdbinit
echo source $srcdir/src/.gdbinit > src/.gdbinit
......
configure.in
View file @ 478ebb73
......@@ -1468,8 +1468,6 @@ fi
HAVE_NS=no
NS_IMPL_COCOA=no
NS_IMPL_GNUSTEP=no
NS_IMPL_GNUSTEP_INC=
NS_IMPL_GNUSTEP_TEMACS_LDFLAGS=
tmp_CPPFLAGS="$CPPFLAGS"
tmp_CFLAGS="$CFLAGS"
CPPFLAGS="$CPPFLAGS -x objective-c"
......@@ -1491,24 +1489,20 @@ if test "${with_ns}" != no; then
ns_appbindir=${ns_appdir}
ns_appresdir=${ns_appdir}Resources
ns_appsrc=${srcdir}/nextstep/GNUstep/Emacs.base
dnl FIXME sourcing this 3 times in subshells seems inefficient.
GNUSTEP_MAKEFILES="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_MAKEFILES)"
dnl FIXME sourcing this several times in subshells seems inefficient.
GNUSTEP_SYSTEM_HEADERS="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_SYSTEM_HEADERS)"
GNUSTEP_SYSTEM_LIBRARIES="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_SYSTEM_LIBRARIES)"
## Pull in stuff from GNUstep-make.
## FIXME? Cleaner to use AC_SUBST_FILE for this?
NS_IMPL_GNUSTEP_INC="FOUNDATION_LIB=gnu
GUI_LIB=gnu
include $GNUSTEP_MAKEFILES/Additional/base.make
include $GNUSTEP_MAKEFILES/Additional/gui.make
shared=no
"
dnl Presumably ${CONFIG_SYSTEM_LIBS} is defined by above includes.
NS_IMPL_GNUSTEP_TEMACS_LDFLAGS="-L${GNUSTEP_SYSTEM_LIBRARIES} -lgnustep-gui -lgnustep-base -lobjc \${CONFIG_SYSTEM_LIBS} -lpthread"
CPPFLAGS="$CPPFLAGS -I${GNUSTEP_SYSTEM_HEADERS}"
CFLAGS="$CFLAGS -I${GNUSTEP_SYSTEM_HEADERS}"
REAL_CFLAGS="$REAL_CFLAGS -I${GNUSTEP_SYSTEM_HEADERS}"
LDFLAGS="$LDFLAGS -L${GNUSTEP_SYSTEM_LIBRARIES}"
dnl I seemed to need these as well with GNUstep-startup 0.25.
GNUSTEP_LOCAL_HEADERS="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_LOCAL_HEADERS)"
GNUSTEP_LOCAL_LIBRARIES="$(. $GNUSTEP_CONFIG_FILE; echo $GNUSTEP_LOCAL_LIBRARIES)"
test "x${GNUSTEP_LOCAL_HEADERS}" != "x" && \
GNUSTEP_LOCAL_HEADERS="-I${GNUSTEP_LOCAL_HEADERS}"
test "x${GNUSTEP_LOCAL_LIBRARIES}" != "x" && \
GNUSTEP_LOCAL_LIBRARIES="-L${GNUSTEP_LOCAL_LIBRARIES}"
CPPFLAGS="$CPPFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
CFLAGS="$CFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
REAL_CFLAGS="$REAL_CFLAGS -I${GNUSTEP_SYSTEM_HEADERS} ${GNUSTEP_LOCAL_HEADERS}"
LDFLAGS="$LDFLAGS -L${GNUSTEP_SYSTEM_LIBRARIES} ${GNUSTEP_LOCAL_LIBRARIES}"
LIB_STANDARD=
START_FILES=
TEMACS_LDFLAGS2=
......@@ -1525,8 +1519,6 @@ shared=no
NS_HAVE_NSINTEGER=no
fi
fi
AC_SUBST(NS_IMPL_GNUSTEP_INC)
AC_SUBST(NS_IMPL_GNUSTEP_TEMACS_LDFLAGS)
AC_SUBST(TEMACS_LDFLAGS2)
ns_frag=/dev/null
......@@ -3311,6 +3303,11 @@ case "$opsys" in
*) LD_SWITCH_SYSTEM_TEMACS= ;;
esac
if test "$NS_IMPL_GNUSTEP" = "yes"; then
LD_SWITCH_SYSTEM_TEMACS="${LD_SWITCH_SYSTEM_TEMACS} -L${GNUSTEP_SYSTEM_LIBRARIES} ${GNUSTEP_LOCAL_LIBRARIES} -lgnustep-gui -lgnustep-base -lobjc -lpthread"
fi
AC_SUBST(LD_SWITCH_SYSTEM_TEMACS)
......@@ -3338,11 +3335,9 @@ case "$opsys" in
;;
esac
## A macro which other sections of Makefile can redefine to munge the
## flags before they are passed to LD. This is helpful if you have
## redefined LD to something odd, like "gcc".
## (The YMF prefix is a holdover from the old name "ymakefile".)
YMF_PASS_LDFLAGS=flags
PRE_EDIT_LDFLAGS=
POST_EDIT_LDFLAGS=
if test "x$ORDINARY_LINK" = "xyes"; then
LINKER="\$(CC)"
......@@ -3366,21 +3361,23 @@ elif test "x$GCC" = "xyes" && test "x$LINKER" = "x"; then
## shell''s ``for'' construct. Note that sane people do not have '.' in
## their paths, so we must use ./prefix-args.
## TODO either make prefix-args check ORDINARY_LINK internally,
## or remove it altogether (bug#6184), removing the need for this macro.
YMF_PASS_LDFLAGS='`./prefix-args -Xlinker flags`'
## or remove it altogether (bug#6184), removing the need for this hack.
PRE_EDIT_LDFLAGS='`./prefix-args -Xlinker'
POST_EDIT_LDFLAGS='`'
fi
AC_SUBST(YMF_PASS_LDFLAGS)
AC_SUBST(PRE_EDIT_LDFLAGS)
AC_SUBST(POST_EDIT_LDFLAGS)
test "x$LINKER" = "x" && LINKER=ld
## FIXME? What setting of YMF_PASS_LDFLAGS should this have?
## FIXME? What setting of EDIT_LDFLAGS should this have?
test "$NS_IMPL_GNUSTEP" = "yes" && LINKER="\$(CC) -rdynamic"
AC_SUBST(LINKER)
## FIXME? The logic here is not precisely the same as that above
## setting YMF_PASS_LDFLAGS. There is no check here for a pre-defined
## LINKER. Should we only be setting LIB_GCC if LD ~ -nostdlib?
## FIXME? The logic here is not precisely the same as that above.
## There is no check here for a pre-defined LINKER.
## Should we only be setting LIB_GCC if LD ~ -nostdlib?
LIB_GCC=
if test "x$GCC" = "xyes" && test "x$ORDINARY_LINK" != "xyes"; then
......@@ -3758,32 +3755,9 @@ fi
test "${exec_prefix}" != NONE &&
exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'`]
# Now get this: Some word that is part of the ${srcdir} directory name
# or the ${configuration} value might, just might, happen to be an
# identifier like `sun4' or `i386' or something, and be predefined by
# the C preprocessor to some helpful value like 1, or maybe the empty
# string. Needless to say consequent macro substitutions are less
# than conducive to the makefile finding the correct directory.
# src/Makefile.in used to treat X11 as equivalent to HAVE_X11.
# But nothing in Emacs defines X11, and everywhere else uses HAVE_X11,
# so that cannot have been doing anything.
[cpp_undefs="`echo $srcdir $configuration $canonical unix mktime register X11 |
sed -e 's/[^a-zA-Z0-9_]/ /g' -e 's/^/ /' -e 's/ *$//' \
-e 's/ */ -U/g' -e 's/-U[0-9][^ ]*//g'`"]
## Check if the C preprocessor will convert `..' to `. .'. If so, set
## CPP_NEED_TRADITIONAL to `yes' so that the code to generate Makefile
## from Makefile.c can correctly provide the arg `-traditional' to the
## C preprocessor.
AC_EGREP_CPP(yes..yes,
[yes..yes],
CPP_NEED_TRADITIONAL=no,
CPP_NEED_TRADITIONAL=yes)
AC_OUTPUT(Makefile lib-src/Makefile oldXMenu/Makefile \
doc/emacs/Makefile doc/misc/Makefile doc/lispintro/Makefile \
doc/lispref/Makefile src/Makefile.c:src/Makefile.in \
doc/lispref/Makefile src/Makefile \
lwlib/Makefile lisp/Makefile leim/Makefile, [
### Make the necessary directories, if they don't exist.
......@@ -3791,41 +3765,15 @@ for dir in etc lisp ; do
test -d ${dir} || mkdir ${dir}
done
# Build src/Makefile from ${srcdir}/src/Makefile.c
# This must be done after src/config.h is built, since we rely on that file.
echo creating src/epaths.h
${MAKE-make} epaths-force
# As of 2000-11-19, newest development versions of GNU cpp preprocess
# `..' to `. .' unless invoked with -traditional
if test "x$GCC" = xyes && test "x$CPP_NEED_TRADITIONAL" = xyes; then
CPPFLAGS="$CPPFLAGS -traditional"
fi
echo creating src/Makefile
( cd src
rm -f junk.c junk1.c junk2.c
sed -e '/start of cpp stuff/q' \
< Makefile.c > junk1.c
sed -e '1,/start of cpp stuff/d'\
-e 's,/\*\*/#\(.*\)$,/* \1 */,' \
< Makefile.c > junk.c
$CPP -P $cpp_undefs -I. -I$srcdir/src $CPPFLAGS junk.c | \
sed -e 's/^ / /' -e '/^#/d' -e '/^[ ]*$/d' > junk2.c
cat junk1.c junk2.c > Makefile.new
rm -f junk.c junk1.c junk2.c
chmod 444 Makefile.new
mv -f Makefile.new Makefile
)
if test ! -f src/.gdbinit && test -f $srcdir/src/.gdbinit; then
echo creating src/.gdbinit
echo source $srcdir/src/.gdbinit > src/.gdbinit
fi
], [GCC="$GCC" NON_GNU_CPP="$NON_GNU_CPP" CPP="$CPP" CPP_NEED_TRADITIONAL="$CPP_NEED_TRADITIONAL" CPPFLAGS="$CPPFLAGS" cpp_undefs="$cpp_undefs"])
], [GCC="$GCC" NON_GNU_CPP="$NON_GNU_CPP" CPP="$CPP" CPPFLAGS="$CPPFLAGS"])
m4_if(dnl Do not change this comment
arch-tag: 156a4dd5-bddc-4d18-96ac-f37742cf6a5e
......
doc/misc/ChangeLog
View file @ 478ebb73
2010-05-26 Michael Albinus <michael.albinus@gmx.de>
* eshell.texi (Built-ins): Describe, how to disable a built-in command
by an alias. (Bug#6226)
2010-05-16 Jay Belanger <jay.p.belanger@gmail.com>
* calc.texi (Manipulating Vectors): Mention that vectors can
......
doc/misc/eshell.texi
View file @ 478ebb73
......@@ -369,6 +369,17 @@ eshell/ls is a compiled Lisp function in `em-ls.el'
/bin/ls
@end example
If you want to discard a given built-in command, you could declare an
alias, @ref{Aliases}. Eample:
@example
~ $ which sudo
eshell/sudo is a compiled Lisp function in `em-unix.el'
~ $ alias sudo '*sudo $*'
~ $ which sudo
sudo is an alias, defined as "*sudo $*"
@end example
Some of the built-in commands have a special behaviour in Eshell:
@table @code
......
etc/ChangeLog
View file @ 478ebb73
2010-05-27 Glenn Morris <rgm@gnu.org>
* PROBLEMS: Remove old information no longer of relevance.
2010-05-24 Stefan Monnier <monnier@iro.umontreal.ca>
* NEWS: Add sections for Emacs-23.3.
......
etc/MACHINES
View file @ 478ebb73
......@@ -198,8 +198,7 @@ IBM RS/6000 (rs6000-ibm-aix*)
IBM System/390 running GNU/Linux (s390-*-linux-gnu)
As of Emacs 21.2, a 31-bit only version is supported on this
system.
As of Emacs 21.2, a 31-bit only version is supported on this system.
Intel 386 (i386-*-freebsd, i386-*-linux-gnu,
i386-*-sol2.4, i386-intsys-sysv,
......@@ -247,11 +246,6 @@ Intel 386 (i386-*-freebsd, i386-*-linux-gnu,
do `gmake install MAKE=gmake'. However, more recently it is
reported that using the system Make on NetBSD 1.3.1 works ok.
If you are using System V release 4.2, you may find that `cc -E'
puts spurious spaces in `src/xmakefile'. If that happens,
specify CPP=/lib/cpp as an option when you run make.
There is no problem if you compile with GCC.
Note that use of Linux with GCC 2.4 and the DLL 4.4 libraries
requires the experimental "net 2" network patches (no relation to
Berkeley Net 2). There is a report that (some version of) Linux
......@@ -491,10 +485,6 @@ System V rel 4.0.3 and 4.0.4 (usg5.4)
If you get compilation errors about wrong number of
arguments to getpgrp, define GETPGRP_NO_ARG.
The standard C preprocessor may generate xmakefile incorrectly. However,
/lib/cpp will work, so use `make CPP=/lib/cpp'. Standard cpp
seems to work OK under Dell 2.2.
Some versions 3 and earlier of V.4, on the Intel 386 and 860, had
problems in the X11 libraries. These prevent Emacs from working
with X. You can use Emacs with X provided your copy of X is based
......
etc/PROBLEMS
View file @ 478ebb73
This diff is collapsed.
lib-src/ChangeLog
View file @ 478ebb73
2010-05-27 Glenn Morris <rgm@gnu.org>
* Makefile.in (distclean): No more Makefile.c.
2010-05-22 Jan Djärv <jan.h.d@swipnet.se>
* Makefile.in (STAMP_INST_SCRIPTS, STAMP_SCRIPS): New (Bug #6246).
......
lib-src/Makefile.in
View file @ 478ebb73
......@@ -283,7 +283,7 @@ clean: mostlyclean
distclean: clean
-rm -f TAGS
-rm -f Makefile Makefile.c blessmail
-rm -f Makefile blessmail
maintainer-clean: distclean
true
......
lisp/ChangeLog
View file @ 478ebb73
......@@ -3,12 +3,34 @@
* language/hebrew.el (hebrew-shape-gstring): Check if a glyph
element of GSTRING is nil.
2010-05-27 Stefan Monnier <monnier@iro.umontreal.ca>
* emacs-lisp/smie.el (smie-forward-token-function)
(smie-backward-token-function): New vars.
(smie-backward-sexp, smie-forward-sexp)
(smie-indent-hanging-p, smie-indent-calculate): Use them.
(smie-default-backward-token): Rename from smie-backward-token and
skip comments.
(smie-default-forward-token): Rename from smie-forward-token and