GitLab

* configure.in: Add tests for `isnan' and `copysign'.

 config.bat: Allow for 2 leading `#'s in comments in src/Makefile.in.
 src/Makefile.in: Don't use Make-style comments past the
 "start of cpp stuff" line.

* configure.in (LD_SWITCH_SYSTEM): Set with configure, not cpp.
Merges logic from src/s/* and src/Makefile.in.
(LD_SWITCH_SYSTEM_TEMACS): New output variable.

* src/Makefile.in (LD_SWITCH_SYSTEM): Set with configure, not cpp.
(LD_SWITCH_SYSTEM_EXTRA): New variable, set by configure.
(TEMACS_LDFLAGS): Use $LD_SWITCH_SYSTEM and $LD_SWITCH_SYSTEM_EXTRA,
move out of cpp section.
* src/s/freebsd.h (LD_SWITCH_SYSTEM):
* src/s/gnu-linux.h (LD_SWITCH_SYSTEM):
* src/s/netbsd.h (LD_SWITCH_SYSTEM):

* admin/CPP-DEFINES: Remove LD_SWITCH_SYSTEM.

* s/usg5-4.h (LIB_STANDARD):
* s/netbsd.h (START_FILES):
* s/irix6-5.h (LIB_STANDARD):
* s/hpux10-20.h (LIB_STANDARD, START_FILES):
* s/gnu-linux.h (START_FILES, LIB_STANDARD):
* s/freebsd.h (START_FILES):
* s/darwin.h (START_FILES):
* s/cygwin.h (START_FILES):
* s/aix4-2.h (LIB_STANDARD):
* m/ibmrs6000.h (START_FILES): Remove, move logic to configure.in.
* Makefile.in (STARTFILES): Rename to START_FILES, define using
autoconf, not cpp.

Define START_FILES and LIB_STANDARD using autoconf.
* configure.in (START_FILES, LIB_STANDARD): New definitions, moved
here from src/s/*.h.
(HAVE_CRTIN): Remove, inline logic in the netbsd
START_FILES/LIB_STANDARD computation.

* configure.in (AC_PROG_LN_S): Remove test, nothing uses @LN_S@.

* Makefile.in (CPP, C_SWITCH_SYSTEM, ALLOCA, LN_S, C_SWITCH_X_SITE)
(LD_SWITCH_X_SITE): Remove unused variables.

* lwlib/Makefile.in (CPP, LN_S, TOP, LN): Remove unused variables.

* oldXMenu/Makefile.in (CPP, LN_S, AS, LD, MV, LS, LINTOPTS, LINTLIBFLAG, MAKE)
(STD_DEFINES, CDEBUGFLAGS, RM_CMD): Remove unused variables.

* src/Makefile.in (CPP, LN_S): Remove unused variables.

* msdos/sed1v2.inp, msdos/sed5x.inp: Remove LN_S, unused.

* Makefile.in (C_SWITCH_SYSTEM): Use @C_SWITCH_SYSTEM@ rather than
@c_switch_system@.

* oldXMenu/Makefile.in (C_SWITCH_SYSTEM, C_SWITCH_MACHINE): Use
@C_SWITCH_SYSTEM@, @C_SWITCH_MACHINE@ rather than
@c_switch_system@, @c_switch_machine@.

* configure.in (LD_SWITCH_X_SITE_AUX): Use AC_SUBST only, not AC_DEFINE as well.
(LD_SWITCH_X_SITE_AUX_RPATH): New output variable.

* nt/config.nt (LD_SWITCH_X_SITE_AUX): Remove.

* src/s/gnu-linux.h (LD_SWITCH_SYSTEM): Use LD_SWITCH_X_SITE_AUX as a shell
variable.
* src/s/netbsd.h (LD_SWITCH_SYSTEM_tmp): Remove.
(LD_SWITCH_SYSTEM): Use $LD_SWITCH_X_SITE_AUX_RPATH.
* src/s/openbsd.h (LD_SWITCH_SYSTEM_tmp): Remove.
(LD_SWITCH_SYSTEM): Use $LD_SWITCH_X_SITE_AUX_RPATH instead of
LD_SWITCH_SYSTEM_tmp.
* src/Makefile.in (LD_SWITCH_X_SITE_AUX, LD_SWITCH_X_SITE_AUX_RPATH):
New variables, set by configure.

* configure.in (LD_SWITCH_SYSTEM_TEMACS): New output variable.

* src/s/aix4-2.h (LD_SWITCH_SYSTEM_TEMACS): Move to configure.in.
* src/s/darwin.h (HEADERPAD_EXTRA, LIBS_NSGUI): Remove.
(LD_SWITCH_SYSTEM_TEMACS): Move to configure.in.
* src/Makefile.in (LD_SWITCH_SYSTEM_TEMACS): New variable, set by configure.
(TEMACS_LDFLAGS): Use $LD_SWITCH_SYSTEM_TEMACS.

* configure.in (C_SWITCH_MACHINE, C_SWITCH_SYSTEM): New output
variables, replacing c_switch_machine, c_switch_system.

* src/s/aix4-2.h (C_SWITCH_SYSTEM):
* src/m/alpha.h (C_SWITCH_MACHINE):
Move to configure.in.
* src/Makefile.in (C_SWITCH_MACHINE, C_SWITCH_SYSTEM):
New variables, set by configure.
(ALL_CFLAGS): Use $C_SWITCH_MACHINE and $C_SWITCH_SYSTEM in place of
$c_switch_machine and $c_switch_system.

* lib-src/Makefile.in: Use @C_SWITCH_SYSTEM@, @C_SWITCH_MACHINE@
rather than @c_switch_system@, @c_switch_machine@.

* configure.in (LIBXT_OTHER, LIBX_OTHER): New output variables.

* src/Makefile.in (LIBX_EXTRA, LIBX_BASE): New variables.
(LIBXT_OTHER, LIBX_OTHER): New, set by configure.
(LIBXT): Set with configure, not cpp.
(LIBX): Remove.
(LIBES): Replace $LIBX with $LIBX_BASE and $LIBX_OTHER.

* Makefile.in (LD_SWITCH_MACHINE): Remove definition, unused.
(TEMACS_LDFLAGS): Do not use LD_SWITCH_MACHINE.

* configure.in (LD_SWITCH_MACHINE, ld_switch_machine): Remove, unused.
(ac_link): Do not use ld_switch_machine.

* configure.in (OTHER_OBJ): Remove.
(PRE_ALLOC_OBJ, POST_ALLOC_OBJ): New output variables.

* configure: Regenerate.

* src/Makefile.in (gmallocobj, rallocobj, vmlimitobj): Initialize to null,
for clarity.
(OTHER_OBJ): Remove.
(PRE_ALLOC_OBJ, POST_ALLOC_OBJ): New, set by configure.
(otherobj): Use PRE_ALLOC_OBJ, POST_ALLOC_OBJ rather than OTHER_OBJ.

* configure.in (OTHER_OBJ): Always include vm-limit.o on Cygwin.
Elsewhere, maybe include it.
* src/Makefile.in (vmlimitobj) [!SYSTEM_MALLOC]: New variable.
(OTHER_OBJ): Define as a separate variable, for clarity.

* configure: Regenerate.

* configure.in (TOOLKIT_LIBW) [HAVE_GTK]: Set to $GTK_LIBS.
(OLDXMENU, LIBXMENU): New output variables.
* src/Makefile.in (OLDXMENU, LIBXMENU) [HAVE_MENUS]:
Set with configure, not cpp.
(LIBW): Remove, replace with $TOOLKIT_LIBW.

* configure.in (OTHER_OBJ): New output variable.
* src/Makefile.in (mallocobj): Remove.
(otherobj): Simplify using @OTHER_OBJ@.

* configure.in (CYGWIN_OBJ): New output variable.
* src/Makefile.in (CYGWIN_OBJ): Set with configure, not cpp.

* configure.in (GPM_MOUSE_SUPPORT): New output variable.
* src/Makefile.in (GPM_MOUSE_SUPPORT): New, set by configure.
(MOUSE_SUPPORT) [!HAVE_MOUSE]: Use $GPM_MOUSE_SUPPORT.

* configure.in (FONT_OBJ): New output variable.
* src/Makefile.in (FONT_OBJ): New, set by configure.
(FONT_DRIVERS): Use $FONT_OBJ.

* configure.in (LIBXMU): New output variable.

* src/Makefile.in (LIBXMU): Set with configure, not cpp.
* src/s/aix4-2.h (LIBXMU):
* src/s/hpux10-20.h (LIBXMU):
Remove definition, now set in configure.

* configure.in (NS_OBJ, NS_SUPPORT): New output variables.
* src/Makefile.in (NS_OBJ, NS_SUPPORT): Set with configure, not cpp.

See discussion in bug#5655.

* configure.in (machine, canonical): On amdx86-64, check for a 32-bit
userland and maybe change values to i386 (move test from s/amdx86-64.h).

* src/m/amdx86-64.h [i386]: Move this test to configure.in.

* configure.in (LIBXTR6): New output variable.  Move unixware special
case here from src/s/unixware.h.

* src/Makefile.in (LIBXTR6): Set with configure, not cpp.
* src/s/unixware.h (NEED_LIBW): Remove definition.

* admin/CPP-DEFINES: Remove NEED_LIBW.

* configure.in (LUCID_LIBW, MOTIF_LIBW): No longer substitute in Makefiles.
(TOOLKIT_LIBW): New output variable, replacing LUCID_LIBW/MOTIF_LIBW.

* src/Makefile.in (LUCID_LIBW, MOTIF_LIBW): Remove, replacing by...
(TOOLKIT_LIBW): New, set by configure.
(@X_TOOLKIT_TYPE@): No longer define it.

* configure.in (HAVE_MOTIF_2_1): Remove unused variable.
(LIBXP): No longer substitute in Makefiles.
(MOTIF_LIBW): New output variable.  Move system-specific settings here
from src/s files.

* src/Makefile.in (LIBXP): Remove, since included in MOTIF_LIBW.
(MOTIF_LIBW): Set with configure, not cpp.
* s/aix4-2.h (LIB_MOTIF):
* s/gnu-linux.h (LIB_MOTIF):
* s/unixware.h (LIB_MOTIF): Move to configure.in.

* admin/CPP-DEFINES: Remove LIB_MOTIF.

* Makefile.in (C_SWITCH_SYSTEM, C_SWITCH_MACHINE, C_SWITCH_X_SITE): Remove
definitions and undefs.  Inline definitions in the only user.
(ALL_CFLAGS): Substitute C_SWITCH_X_SYSTEM using autoconf.

* Makefile.in (C_SWITCH_X_SYSTEM): Define using autoconf.

* Makefile.in (C_SWITCH_X_SYSTEM): Define using autoconf.

* configure.in (C_SWITCH_X_SYSTEM): Define using autoconf, not cpp.

* Makefile.in (LIB_X11_LIB): Remove, inline in the only user.
(obj): Use autoconf for unexec instead of cpp.

* configure.in (LIB_X11_LIB): Remove, inline in the only user.
(unexec): Define unconditionally, all platforms define
UNEXEC.  AC_SUBST it.
(UNEXEC_SRC): Remove, unused.

* configure.in (HAVE_MOTIF_2_1, HAVE_LIBXP): Remove unused AC_DEFINEs,
replaced by LIBXP.

* configure, src/config.in: Regenerate.

* configure.in (--with-crt-dir): Doc fix (now valid for all platforms).
(CRT_DIR): On (powerpc64|sparc64)-*-linux-gnu*, default to /usr/lib64.
On hpux10-20, default to /lib.

* src/m/amdx86-64.h (START_FILES, LIB_STANDARD): Change the logic around,
since the defaults (set by the system file) are fine in most cases.
[GNU_LINUX, __OpenBSD__, __NetBSD__, __APPLE__]: Remove sections.
* src/m/ibms390x.h (START_FILES, LIB_STANDARD):
* src/m/macppc.h (START_FILES, LIB_STANDARD) [GNU_LINUX]:
* src/m/sparc.h (START_FILES, LIB_STANDARD) [__linux__]:
Remove definitions, since they are set correctly in s/gnu-linux.h.
* src/s/freebsd.h (START_FILES, LIB_STANDARD):
* src/s/gnu-linux.h (START_FILES, LIB_STANDARD):
* src/s/hpux10-20.h (START_FILES):
* src/s/netbsd.h (START_FILES, LIB_STANDARD, START_FILES_1, END_FILES_1):
Use $CRT_DIR in place of fixed /usr/lib, /lib directories.

* src/Makefile.in: Comment.

* configure.in (LUCID_LIBW, LIBXP, WIDGET_OBJ): New output variables.

* src/Makefile.in (LIBXP, LUCID_LIBW, WIDGET_OBJ): Set via configure.
(MOTIF_LIBW): Use $LIBXP.
(otherobj): Use $WIDGET_OBJ.

* Makefile.in (LIBS_MACHINE): Remove all uses, unused.
* configure.in (LIBS_MACHINE): Remove, unused.

* configure.in (CRT_DIR): New output variable.
(--with-crt-dir): New option.  (Bug#5655)
(HAVE_LIB64_DIR): Remove.

* src/Makefile.in (CRT_DIR): New variable, set by configure.
* src/m/amdx86-64.h, m/ibms390x.h (START_FILES, LIB_STANDARD):
Use $CRT_DIR rather than HAVE_LIB64_DIR.  (Bug#5655)

* configure.in: Revert last change.

Regenerate configure.

* configure.in (LIBSELINUX_LIBS): Always substitute in Makefiles.
(GTK_OBJ, DBUS_OBJ, LIBXSM, XMENU_OBJ, XOBJ): New output variables.

* src/Makefile.in (DBUS_OBJ, GTK_OBJ, XMENU_OBJ, XOBJ):
Define using autoconf, not cpp.
(LIBXSM): New variable, set by autoconf.
(LIBXT): Use $LIBXSM.

* configure.in (LIBSELINUX_LIBS): Always substitute in Makefiles.
* src/Makefile.in (LIBSELINUX_LIBS): Remove containing #ifdef.

* configure.in: New option: --with(out)-selinux, on by default.
Set HAVE_LIBSELINUX if we find libselinux, and substitute
LIBSELINUX_LIBS in Makefiles.

* src/Makefile.in (LIBSELINUX_LIBS): New.
(LIBES): Add $LIBSELINUX_LIBS.
* src/eval.c, lisp.h (call7): New function.
* src/fileio.c [HAVE_LIBSELINUX]: Include selinux headers.
(Ffile_selinux_context, Fset_file_selinux_context):
New functions.
(Fcopy_file): New parameter preserve-selinux-context.
(Frename_file): Preserve selinux context when renaming by copy-file.

* lisp/files.el (backup-buffer): Handle SELinux context, and return it
if a backup was made by renaming.
(backup-buffer-copy): Set SELinux context to the target file.
(basic-save-buffer): Set SELinux context of the newly written file.
(basic-save-buffer-1): Now it also returns any SELinux context.
(basic-save-buffer-2): Set SELinux context of the newly created file,
and return it.
* lisp/net/tramp.el (tramp-file-name-for-operation):
Add file-selinux-context.